Do you do legal suite basement drywall in Edmonton?

Yes, and we know the spec. Edmonton legal suites require 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC-rated soundproof board on the party walls between the suite and the main living space. That spec is how we board Highlands suites — and how they pass inspection.

What type of drywall do you use for exterior basement walls in Edmonton?

Moisture-resistant (green board or purple board) on all walls against the exterior foundation and around plumbing and laundry. For Highlands interior partitions clear of moisture, standard 1/2” drywall is the right product. For legal suites, 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify before we start.

Do you take Highlands basement finishing to Level 5?

Where the paint spec calls for it, yes — most basements finish well at Level 4, and we tell you honestly which your Highlands project needs.

Do you do basement drywall in Highlands?

Yes — basement development in Abbottsfield, Alberta Avenue, Beacon Heights is part of our regular work, and we book to your project. We also cover Abbottsfield, Alberta Avenue, Beacon Heights and North Central.

What board do you use on exterior basement walls in Highlands?

In Highlands basements, foundation-adjacent walls and plumbing or laundry areas take moisture-resistant board (green or purple). Standard 1/2” sheets handle the dry interior partitions in Highlands basements. In Highlands legal suites we board the ceiling Type X fire-rated and the party walls soundproof. Each Highlands surface has its product chosen at quote time, before the job begins.

Can you board a basement that was partially started?

All the time. We assess what is already there — whether the board choice is correct for each surface, whether the framing is square enough to board, whether any board needs to come down — and give you a straight price to finish it properly. Boarding over issues is not how we work in Highlands.

Basement Drywall Highlands Edmonton | Basement Dev

Basement drywall and finishing in Abbottsfield, Alberta Avenue, Beacon Heights, done to spec

We finish basements in Highlands homes — boarding the framing, specifying the right board type for each surface, taping and mudding every joint and corner to Level 4, and leaving the space paint-ready. Highlands is one of North Central’s newest communities — most homes are less than ten years old with framed, unfinished basements that homeowners are now ready to develop. We cover Highlands, East Hills, Applewood and Edmonton and the surrounding area, 7 days a week.

Bulkheads, soffits and mechanical room boarding
Level 4 or Level 5 finishing
Basement boarding and taping — Level 4 as standard
The Highlands suite boundary gets soundproof board
Coordinated with your other trades
Abbottsfield, Alberta Avenue, Beacon Heights coverage — we come to you
Moisture-resistant board on Highlands exterior walls and around plumbing

Our Basement Drywall process in Highlands in Edmonton

Assess before we start — always in Highlands

Every job in Highlands starts with an on-site assessment. We do not guess at scope, board type or texture match. We confirm what is needed, give you a fixed price and only then start the work.

Left clean and paint-ready in Highlands

When we leave your Highlands home, the work is done properly — Level 4 tape on every joint, texture matched, surface sanded flat and ready for the painter. No rework from the painter. No callbacks.

What affects the cost of basement drywall in Edmonton in Edmonton?

Linear footage, board type and ceiling complexity in Edmonton basements

The cost of basement drywall in Edmonton comes down to five things: total linear footage of framed wall, ceiling square footage and height, the number of bulkheads, soffits and chases, board type (standard, moisture-resistant or soundproof cost differently), and how much mechanical, plumbing and structural work the walls have to work around. A simple open basement in a 2010s North Central new build is different from a basement in a 1970s Abbottsfield, Alberta Avenue, Beacon Heights bungalow with low ceilings and exposed beams. On-site measurement in Highlands first; the fixed price follows before we lift a sheet.

Legal suite requirements and Edmonton basement drywall specs

A legal secondary suite in Edmonton has specific drywall requirements — 5/8” Type X fire-rated board on the ceiling between the suite and the floor above, and STC-rated soundproof board on suite walls. Moisture-resistant board is required in bathrooms, laundry and any wall with exterior exposure. We know the Edmonton spec and we board to it — you will not need to call us back to add board before an inspection.

What affects the cost of basement drywall in Highlands in Edmonton?

Size, board spec and finish level

The cost in Highlands depends on the square footage, the board spec (moisture-resistant on exterior walls, fire-rated and soundproof if there is a suite), and the finish level. We price off the layout and a site look.

Basement development in Highlands

Basement development is a steady call here, and we put the right board where the plan and code require it.

About Basement Drywall in Highlands in Edmonton

Basement Drywall in Highlands — what to expect

We provide basement drywall services in Highlands and surrounding communities, 7 days a week. Highlands is one of North Central’s oldest communities, with homes from the 1960s and 1970s. Renovation drywall, stipple and popcorn ceiling removal and crack repair are among the most common drywall calls from this established North Central area.

Fixed price — assessed on site in Highlands

We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin unless the scope changes and we agree on it first.

Our Highlands basement drywall process in Edmonton, step by step

Board to spec

In Abbottsfield, Alberta Avenue, Beacon Heights we board ceiling first, then walls, with moisture-resistant board on every exterior foundation wall and fire-rated or soundproof board where a suite is involved.

The finish stage

In Abbottsfield, Alberta Avenue, Beacon Heights we tape, build mud coats with real drying time, sand flat to Level 4 or 5 and verify under light before handing off for paint.

How it works

Simple, clean, on schedule — Basement Drywall in Highlands Edmonton

Free quote

We come out to your Highlands Edmonton property, take a real look at the basement drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every basement drywall quote in Highlands Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the basement drywall in Highlands Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Highlands Edmonton home while we finish the basement drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished basement drywall with us and you're happy with the result in Highlands Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the basement drywall contractor Highlands Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your basement drywall project in Highlands Edmonton.

Read our reviews on Google

FAQ — Basement Drywall Highlands Edmonton

Basement Drywall Highlands Edmonton: your questions answered

Do you do legal suite basement drywall in Edmonton in Edmonton?: Yes, and we know the spec. Edmonton legal suites require 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC-rated soundproof board on the party walls between the suite and the main living space. That spec is how we board Highlands suites — and how they pass inspection.
What type of drywall do you use for exterior basement walls in Edmonton?: Moisture-resistant (green board or purple board) on all walls against the exterior foundation and around plumbing and laundry. For Highlands interior partitions clear of moisture, standard 1/2” drywall is the right product. For legal suites, 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify before we start.
Do you take Highlands basement finishing to Level 5?: Where the paint spec calls for it, yes — most basements finish well at Level 4, and we tell you honestly which your Highlands project needs.
Do you do basement drywall in Highlands in Edmonton?: Yes — basement development in Abbottsfield, Alberta Avenue, Beacon Heights is part of our regular work, and we book to your project. We also cover Abbottsfield, Alberta Avenue, Beacon Heights and North Central.
What board do you use on exterior basement walls in Highlands?: In Highlands basements, foundation-adjacent walls and plumbing or laundry areas take moisture-resistant board (green or purple). Standard 1/2” sheets handle the dry interior partitions in Highlands basements. In Highlands legal suites we board the ceiling Type X fire-rated and the party walls soundproof. Each Highlands surface has its product chosen at quote time, before the job begins.
Can you board a basement that was partially started?: All the time. We assess what is already there — whether the board choice is correct for each surface, whether the framing is square enough to board, whether any board needs to come down — and give you a straight price to finish it properly. Boarding over issues is not how we work in Highlands.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Basement Drywall Highlands Edmonton

Basement drywall and finishing in Abbottsfield, Alberta Avenue, Beacon Heights, done to spec