Attic Insulation Ritchie Edmonton

Attic top-ups in Ritchie that hold their depth

Attics in Ritchie lose depth over time — insulation settles, someone crawls through it for a wiring job, and the corners near the eaves are usually thin to begin with. A top-up is only worth doing if the baffles are clear and the ceiling below is sealed, so that is what we check before quoting.

• Depth markers left in place so the result is verifiable
• Attic hatch insulated and weatherstripped
• Baffles kept clear so the soffit vents still breathe
• Existing insulation levelled before the top-up
• Air sealing at pot lights, top plates and the attic hatch
• Blown-in loose-fill to the depth your permit specifies

Attic Insulation Ritchie Edmonton

The attic hatch nobody insulates

Ritchie drywall in context

Sealing the ceiling below first

The eaves are where it goes thin

Pot lights, and which ones can be covered

The attic hatch, which everybody forgets

Ice damming and what the attic has to do with it

Simple, clean, on schedule — Attic Insulation in Ritchie Edmonton

Attic Insulation Ritchie Edmonton: your questions answered

How much insulation should my Ritchie attic have?

The depth comes from what the code asks for on your permit, not from us. What we can tell you is the depth you have now, whether it is even, and whether the eaves and hatch are dealt with — those three often matter more than the last few inches.

My bathroom fan seems to vent into the attic. Is that a problem?

Yes, and it needs correcting before insulating. It dumps warm wet air into the coldest part of the house, and burying it under fresh insulation hides a moisture source that will show up later as frost and staining.

Do I need to seal before adding insulation?

Yes, and it is the part most often skipped. Warm moist air leaking from the house frosts the roof deck and wets the insulation. Blowing over unsealed pot lights and top plates buries the problem instead of fixing it.

Can I add over the old insulation?

Usually yes, if it is dry, even and uncontaminated. If it is wet, compacted, rodent-affected or hiding unsealed penetrations, removing it first is worth the cost, and we tell you which one we found.

How much insulation should my attic have?

It is settled depth and even coverage that decide performance, not the product name. We set depth markers before blowing so the result is measurable, and check the corners rather than just the area near the hatch.

Will you block my soffit vents?

No. Baffles hold the insulation back at the eaves so air can still move from the soffits to the ridge. A blocked attic gets damp no matter how much insulation is in it.