Attic Insulation Leduc

Attic top-ups in Leduc that hold their depth

Attics in Leduc lose depth over time — insulation settles, someone crawls through it for a wiring job, and the corners near the eaves are usually thin to begin with. A top-up is only worth doing if the baffles are clear and the ceiling below is sealed, so that is what we check before quoting.

• Air sealing at pot lights, top plates and the attic hatch
• Blown-in loose-fill to the depth your permit specifies
• Depth markers left in place so the result is verifiable
• Existing insulation levelled before the top-up
• Attic hatch insulated and weatherstripped
• Baffles kept clear so the soffit vents still breathe

Attic Insulation Leduc

Insulating a Leduc attic with knob-and-tube or old wiring

Leduc drywall in context

The attic hatch nobody insulates

Storage in the attic

The attic hatch, which everybody forgets

Topping up against removing and replacing

Attics over additions and vaulted areas

Simple, clean, on schedule — Attic Insulation in Leduc

Attic Insulation Leduc: your questions answered

I store things in my attic. Can I keep doing that?

Yes, but the plywood squashes the insulation beneath it to joist depth. Either the storage area gets raised on a platform above the finished depth, or it stays as a deliberately weaker zone kept small. We will not top up around it and pretend it is not there.

Can you just blow on top of what is already there?

Usually yes, if the existing insulation is dry, undisturbed and not contaminated. If it is wet or shows rodent activity it comes out first, because topping over that seals the problem in rather than fixing it.

Do you insulate over an addition or a vaulted ceiling?

Those need looking at specifically rather than quoting an average depth. Shallow attics, cathedral sections and knee walls are usually the coldest rooms in an Leduc house and the parts a general top-up misses.

Cellulose or fibreglass?

Both work when installed to depth with the ceiling sealed underneath. Cellulose is denser and resists air movement better; fibreglass is lighter and settles less. We pick based on what is already up there and tell you why.

Can you blow insulation over my pot lights?

Only if they are rated for contact with insulation. Older fixtures need clearance and have to be boxed or replaced. Either way they are significant air leaks, so they get sealed first.

Do you insulate the attic hatch too?

Yes. It is a direct opening between the house and a space at outdoor temperature, and it is usually the first place we look when someone says a hallway or landing is cold.