Attic Insulation Belmont Edmonton

Attic insulation in Belmont: air seal first, then blow

Attics in Belmont lose depth over time — insulation settles, someone crawls through it for a wiring job, and the corners near the eaves are usually thin to begin with. A top-up is only worth doing if the baffles are clear and the ceiling below is sealed, so that is what we check before quoting.

• Air sealing at pot lights, top plates and the attic hatch
• Blown-in loose-fill to the depth your permit specifies
• Depth markers left in place so the result is verifiable
• Attic hatch insulated and weatherstripped
• Existing insulation levelled before the top-up
• Baffles kept clear so the soffit vents still breathe

Attic Insulation Belmont Edmonton

Storage in the attic

Belmont drywall in context

Topping up against removing and replacing

Depth, and how to check we delivered it

Depth is the whole number

The attic hatch nobody insulates

Attics over additions and vaulted areas

Simple, clean, on schedule — Attic Insulation in Belmont Edmonton

Attic Insulation Belmont Edmonton: your questions answered

Do you insulate over an addition or a vaulted ceiling?

Those need looking at specifically rather than quoting an average depth. Shallow attics, cathedral sections and knee walls are usually the coldest rooms in an Belmont house and the parts a general top-up misses.

Cellulose or fibreglass?

Both work when installed to depth with the ceiling sealed underneath. Cellulose is denser and resists air movement better; fibreglass is lighter and settles less. We pick based on what is already up there and tell you why.

Why does my Belmont attic frost up in winter?

Almost always warm moist air leaking up from the house through pot lights, top plates or the hatch, then condensing on cold sheathing. More insulation on its own does not fix it — the leaks have to be sealed first.

Do I need to seal before adding insulation?

Yes, and it is the part most often skipped. Warm moist air leaking from the house frosts the roof deck and wets the insulation. Blowing over unsealed pot lights and top plates buries the problem instead of fixing it.

Will insulating my attic stop the ice at my eaves?

Often it helps a great deal, because ice damming is usually escaping heat melting snow that then refreezes over the cold overhang. Air sealing plus even coverage to the eaves lowers the deck temperature, which is the actual cause.

Should I block the vents to stop drafts?

No. The attic is meant to run close to outdoor temperature so the roof deck stays cold. Blocking soffit vents causes exactly the ice damming people add insulation to prevent.