How many wall and ceiling openings does a full poly-B re-pipe leave in an MacEwan home?

It depends on the MacEwan home layout and how the plumber ran the new Poly-B lines. A typical full re-pipe in a Edmonton-area home leaves 15 to 40 cut-outs. We count every MacEwan opening during the on-site assessment and price the full scope on one fixed number — every opening, one invoice.

Do I need to wait for plumbing inspections before you repair the drywall in my MacEwan home?

Yes. We do not close any cut-out in your MacEwan home until the plumbing re-pipe is done and inspections have passed. In MacEwan, sealing drywall ahead of the Poly-B inspection means it gets reopened and you pay twice. We work around your MacEwan plumber and book to follow the repipe inspections.

How many cut-outs does a full poly-B re-pipe typically leave in a Edmonton home?

How much patching a MacEwan home needs depends on its layout and the re-pipe routing. A one-storey Edmonton bungalow from the 1970s typically has 15 to 25 wall and ceiling cut-outs. A two-storey from the same era can have 25 to 40. We assess the full scope on-site and price it accordingly — one fixed price for every opening.

How long does poly-b drywall repair take in an MacEwan home?

Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in MacEwan are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.

Can you match the wall and ceiling texture after the patches in MacEwan?

Yes. Texture matching is part of every poly-B re-pipe drywall job we do in MacEwan. The MacEwan surface texture gets matched exactly — knockdown or smooth — and the patches hide under paint. It is baked into every MacEwan job, not billed on top.

Poly-B Drywall Repair MacEwan | Poly-B Patching

Poly-B drywall repair in MacEwan — close every cut-out, invisible under paint

Poly-B plumbing was installed in Edmonton-area homes from the late 1970s through the mid-1990s. When a plumber does a full re-pipe or repairs a failed fitting in a MacEwan home, the job leaves cut-outs in walls and ceilings. MacEwan is a premium Southwest community built with PEX or copper plumbing. Plumbing repair patches here are small scope and the finish expectation is high. We follow the MacEwan plumber and the inspections, then close, Level-4 tape and texture-match every opening until the re-pipe is invisible. We cover MacEwan, Allard, Ambleside, Blackburne and surrounding communities, 7 days a week.

Targeted fitting failure patch — one cut-out to a full room
Single fitting failure patches in MacEwan — targeted, paint-ready
Coordinated with your MacEwan plumber — we follow the Poly-B inspections
Room-by-room dust control in your MacEwan home, clean at the end
Drywall repair after poly-B re-pipe — all cut-outs closed
Re-pipe drywall in MacEwan — all cut-outs closed, one scope, one invoice
Tape to Level 4 on every MacEwan patch — bedded tape, multiple coats, sanded flat

What affects the cost of poly-B re-pipe drywall repair in MacEwan?

How many cut-outs and which textures in MacEwan homes

The cost of poly-B re-pipe drywall repair in a MacEwan home is driven by how many cut-outs the plumber left, whether they are in walls or ceilings (ceilings require more setup), and how many different textures need to be matched throughout the home. We walk the MacEwan home, scope every opening and set a fixed price for all of it. In MacEwan homes with higher poly-B density, a full re-pipe can leave 15 to 40 cut-outs across multiple rooms, closets and utility spaces.

Coordinating the drywall work with your plumber in MacEwan

Re-pipe jobs in MacEwan go smoothest when the drywall work follows the plumbing directly. We coordinate with the plumber and schedule to follow inspections — your MacEwan home is not sitting with open walls any longer than necessary. For an upcoming MacEwan Poly-B replacement, call ahead and we coordinate the drywall timing from the start.

Poly-B Drywall Repair work we do in MacEwan

Full re-pipe drywall repairs in 1960s and 1970s MacEwan homes

MacEwan homes from the 1960s and 1970s have among the highest poly-B plumbing density in Edmonton. A full re-pipe in an MacEwan home from this era leaves access holes in walls and ceilings throughout — typically 15 to 40 cut-outs. We come in after the re-pipe and inspections, close all the openings, tape the joints to Level 4 and texture match so the patches are invisible under paint.

Single poly-B fitting failure repairs in MacEwan

Not every poly-B call in MacEwan is a full re-pipe. A single fitting failure at a bathroom shutoff or inside the wall can require a targeted cut-out, plumbing repair and drywall patch. We patch the cut-out left by the plumber, tape to Level 4 and texture match — the repair does not read as a repair under paint.

Why MacEwan homeowners choose Emplastrum for poly-B re-pipe drywall repair

We coordinate with your plumber and follow inspections in MacEwan

The most common way a re-pipe drywall job creates extra cost is closing walls before inspections pass. In MacEwan we work with the plumber and hold off until inspections pass. Every cut-out in your MacEwan home gets the same Level 4 finish — because a patch that reads as a patch under paint is not a finished job.

Fixed price for the full scope, texture match included — MacEwan, Allard, Ambleside, Blackburne and beyond

We cover MacEwan, Allard, Ambleside, Blackburne and all surrounding communities, 7 days a week. We come on-site, count every opening, note every texture in your MacEwan home and give you a fixed price that covers the complete scope. Texture matching is part of the job. Free quotes, same-day reply.

Why MacEwan homeowners choose Emplastrum for poly-B re-pipe drywall repair

We coordinate with your plumber and follow inspections in MacEwan

The most common way a re-pipe drywall job creates extra cost is closing walls before inspections pass. We coordinate with the MacEwan plumber and wait for inspections before starting the drywall. Every cut-out in your MacEwan home gets the same Level 4 finish — because a patch that reads as a patch under paint is not a finished job.

Fixed price for the full scope, texture match included — MacEwan, Allard, Ambleside, Blackburne and beyond

Our poly-B re-pipe drywall repair process in MacEwan

Inspections first — we do not close cut-outs early in MacEwan homes

We do not close a single wall or ceiling cut-out in your MacEwan home until the plumbing re-pipe is done and inspections have passed. An MacEwan wall closed ahead of inspection gets re-cut by the inspector — the Poly-B patch ends up paid for twice. We coordinate with the plumber and schedule to follow the inspection, every time.

Every opening taped to Level 4 and texture matched in MacEwan

After inspections, we fit new board into each cut-out and tape the joints to Level 4 — properly bedded tape, multiple coats, sanded flat. An MacEwan Poly-B patch lives or dies on the joints — sloppy ones read under paint. We texture match every repaired area to the surrounding wall or ceiling in your MacEwan home — knockdown, smooth or any existing pattern — and leave paint-ready. Where the plumber opened the MacEwan walls should be impossible to spot afterward.

What affects the cost of poly-B re-pipe drywall repair in Edmonton?

Patch count, ceiling vs. wall, and texture matching

The main cost drivers for poly-B re-pipe drywall repair in Edmonton are how many cut-outs the plumber left, whether the openings are in walls or ceilings (ceilings take more setup), and how many different textures need to be matched throughout the home. A full re-pipe in a 1970s Edmonton bungalow — one storey, slab-on-grade or crawl space below — can leave 15 to 25 wall and ceiling patches. A two-storey from the same era can leave 25 to 40. We walk the MacEwan home, scope every opening and set a fixed price for all of it.

Coordinating around the plumber in Edmonton

Re-pipe jobs go smoothest when the drywall work follows the plumbing directly. We schedule to come in immediately after the plumber is done and inspections have passed — so your Edmonton home is not sitting with open walls for weeks. If you are planning a re-pipe, call us before the plumbing starts and we can coordinate the timing from the beginning.

How it works

Simple, clean, on schedule — Poly-B Repair in Macewan

Free quote

We come out to your Macewan property, take a real look at the poly-b repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every poly-b repair quote in Macewan starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the poly-b repair in Macewan. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Macewan home while we finish the poly-b repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished poly-b repair with us and you're happy with the result in Macewan. If anything needs a second look, we handle it before we call the job done.

FAQ — Poly-B Drywall Repair MacEwan

Poly-B Drywall Repair MacEwan: your questions answered

How many wall and ceiling openings does a full poly-B re-pipe leave in an MacEwan home?: It depends on the MacEwan home layout and how the plumber ran the new Poly-B lines. A typical full re-pipe in a Edmonton-area home leaves 15 to 40 cut-outs. We count every MacEwan opening during the on-site assessment and price the full scope on one fixed number — every opening, one invoice.
Do I need to wait for plumbing inspections before you repair the drywall in my MacEwan home?: Yes. We do not close any cut-out in your MacEwan home until the plumbing re-pipe is done and inspections have passed. In MacEwan, sealing drywall ahead of the Poly-B inspection means it gets reopened and you pay twice. We work around your MacEwan plumber and book to follow the repipe inspections.
How many cut-outs does a full poly-B re-pipe typically leave in a Edmonton home?: How much patching a MacEwan home needs depends on its layout and the re-pipe routing. A one-storey Edmonton bungalow from the 1970s typically has 15 to 25 wall and ceiling cut-outs. A two-storey from the same era can have 25 to 40. We assess the full scope on-site and price it accordingly — one fixed price for every opening.
How long does poly-b drywall repair take in an MacEwan home?: Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in MacEwan are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.
Do you do poly-B re-pipe drywall repair in MacEwan?: Yes — MacEwan is part of our regular service area. We cover MacEwan, Ambleton, Allard, Ambleside, Blackburne and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.
Can you match the wall and ceiling texture after the patches in MacEwan?: Yes. Texture matching is part of every poly-B re-pipe drywall job we do in MacEwan. The MacEwan surface texture gets matched exactly — knockdown or smooth — and the patches hide under paint. It is baked into every MacEwan job, not billed on top.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Poly-B Drywall Repair MacEwan

Poly-B drywall repair in MacEwan — close every cut-out, invisible under paint