Do I need to wait for plumbing inspections before you repair the drywall in my Garneau home?

Yes. We do not close any cut-out in your Garneau home until the plumbing re-pipe is done and inspections have passed. Skip the inspection wait in Garneau and the closed wall gets cut back in — the Poly-B patch is billed twice. Our Garneau schedule follows your plumber and the inspection sign-off directly.

Can you coordinate with my plumber for the re-pipe in Garneau?

Yes. Give us a heads-up before the Garneau repipe and we sync directly with the plumber and the inspection timeline. This keeps the walls in your Garneau home closed as quickly as possible after the plumbing work is done.

How many wall and ceiling openings does a full poly-B re-pipe leave in a Garneau home?

How much patching a Garneau home needs depends on its layout and the re-pipe routing. A typical full re-pipe in a Edmonton-area home leaves 15 to 40 cut-outs. In Garneau we count all the cut-outs on site and quote one fixed price covering every one.

Do I need to wait for plumbing inspections before you repair the drywall in my Garneau home?

Yes. We do not close any cut-out in your Garneau home until the plumbing re-pipe is done and inspections have passed. Board over an Garneau opening before the inspection and the inspector re-cuts it — double the repair bill. In Garneau we sync with your plumber and slot in right after the inspections.

Can you match the wall and ceiling texture after the patches in Garneau?

Yes. Texture matching is part of every poly-B re-pipe drywall job we do in Garneau. Knockdown, smooth or any Garneau pattern — we match the surrounding surface so the Poly-B patches vanish under paint. This is not an add-on in Garneau — it is standard on every Poly-B patch.

How many wall and ceiling openings does a full poly-B re-pipe leave in an Garneau home?

How much patching an Garneau home needs depends on its layout and the re-pipe routing. A typical full re-pipe in a Edmonton-area home leaves 15 to 40 cut-outs. In Garneau we count all the cut-outs on site and quote one fixed price covering every one.

Poly-B Drywall Repair Garneau | Poly-B Patching

Poly-B re-pipe drywall repair in Garneau

Poly-B plumbing was installed in Edmonton-area homes from the late 1970s through the mid-1990s. When a plumber does a full re-pipe or repairs a failed fitting in an Garneau home, the job leaves cut-outs in walls and ceilings. Garneau is a premium Scona community built with PEX or copper plumbing. Plumbing repair patches here are small scope and the finish expectation is high. We follow the Garneau plumber and the inspections, then close, Level-4 tape and texture-match every opening until the re-pipe is invisible. We cover Garneau, Allendale, Argyll, Belgravia and surrounding communities, 7 days a week.

Texture matched to existing wall and ceiling in Garneau homes
Garneau patches finished to Level 4 — bedded tape, built-up coats, a flat sand
Single fitting failure patches — targeted, paint-ready
Tape to Level 4 and texture match on every patch
Level 4 joints across the Garneau repair: bedded, multi-coat, flat-sanded
Dust contained room by room across the Garneau home, cleaned before we leave
Re-pipe drywall — all cut-outs closed, one scope, one invoice

Our poly-B re-pipe drywall repair process in Garneau

Inspections first — we do not close cut-outs early in Garneau homes

We do not close a single wall or ceiling cut-out in your Garneau home until the plumbing re-pipe is done and inspections have passed. If Garneau openings are boarded before the repipe inspection, the inspector reopens them and the homeowner is billed twice. We coordinate with the plumber and schedule to follow the inspection, every time.

Every opening taped to Level 4 and texture matched in Garneau

After inspections, we fit new board into each cut-out and tape the joints to Level 4 — properly bedded tape, multiple coats, sanded flat. Get the Garneau joints wrong and they show through the paint later. We texture match every repaired area to the surrounding wall or ceiling in your Garneau home — knockdown, smooth or any existing pattern — and leave paint-ready. In Garneau, the plumber’s cut lines should vanish completely.

Our poly-B re-pipe drywall repair process in Garneau

Inspections first — we do not close cut-outs early in Garneau homes

We do not close a single wall or ceiling cut-out in your Garneau home until the plumbing re-pipe is done and inspections have passed. Closing Garneau drywall before the Poly-B inspection forces the inspector to cut back in — and the homeowner pays for the repair twice. We coordinate with the plumber and schedule to follow the inspection, every time.

Every opening taped to Level 4 and texture matched in Garneau

After inspections, we fit new board into each cut-out and tape the joints to Level 4 — properly bedded tape, multiple coats, sanded flat. Joints in an Garneau patch have to be right or they telegraph under paint. We texture match every repaired area to the surrounding wall or ceiling in your Garneau home — knockdown, smooth or any existing pattern — and leave paint-ready. You should not be able to tell where the plumber cut into your Garneau walls.

Types of poly-B drywall work we do in Garneau homes

Full re-pipe drywall repair in Garneau

A full poly-B re-pipe in an Garneau home leaves access cut-outs in walls and ceilings throughout — in bathrooms, utility rooms, hallways, closets and wherever the plumber needed to access the supply lines. All Garneau openings closed, taped to Level 4, texture-matched end to end. The scope varies by home size and layout; we count every opening on-site and price the full job before we start.

Single fitting failure patches in Garneau

Not every poly-B repair in Garneau is a full re-pipe. A one-off Poly-B fitting failure in Garneau (bathroom shutoff, tank connection, in-wall branch) produces a single cut-out for drywall patch-back. Garneau is a premium Scona community built with PEX or copper plumbing. Plumbing repair patches here are small scope and the finish expectation is high. Whatever the Garneau patch count, we close the access opening, tape to Level 4 and blend the surrounding texture.

What affects the cost of poly-B re-pipe drywall repair in Garneau?

How many cut-outs and which textures in Garneau homes

The cost of poly-B re-pipe drywall repair in a Garneau home is driven by how many cut-outs the plumber left, whether they are in walls or ceilings (ceilings require more setup), and how many different textures need to be matched throughout the home. One on-site Garneau assessment, one fixed price covering every Poly-B cut-out. In Garneau homes with higher poly-B density, a full re-pipe can leave 15 to 40 cut-outs across multiple rooms, closets and utility spaces.

Coordinating the drywall work with your plumber in Garneau

Re-pipe jobs in Garneau go smoothest when the drywall work follows the plumbing directly. We coordinate with the plumber and schedule to follow inspections — your Garneau home is not sitting with open walls any longer than necessary. Booking a Garneau re-pipe? Reach out before the plumbing work and we sync the drywall schedule early.

Poly-B drywall repair work we do across Edmonton

Full re-pipe drywall work in Scona’s established communities

Allendale, Argyll, Belgravia — these are the Edmonton communities where we do consistent full re-pipe drywall work. A typical job in one of these homes involves 15 to 40 wall and ceiling cut-outs across multiple rooms, closets, utility spaces and occasionally crawl spaces. In Garneau we seal each opening, take joints to Level 4 and match texture everywhere. We work room by room so the home stays livable, and we clean up each room completely before we move on.

Single fitting failure patches and newer-community repair work

Not every poly-B call is a full re-pipe. A single fitting failure at a bathroom shutoff or hot water tank connection in a home that has not yet been re-piped leaves a targeted cut-out. We patch it, tape to Level 4 and texture match — same standard as a full re-pipe job, just a single opening. In newer Edmonton communities — Allendale, Argyll, Belgravia — the calls are small-scope plumbing repair patches where the primary requirement is a clean Level 4 finish and a precise texture match.

Our Poly-B Drywall Repair process in Garneau

Assess before we start — always in Garneau

Every job in Garneau starts with an on-site assessment. We do not guess at scope, board type or texture match. We confirm what is needed, give you a fixed price and only then start the work.

Left clean and paint-ready in Garneau

When we leave your Garneau home, the work is done properly — Level 4 tape on every joint, texture matched, surface sanded flat and ready for the painter. No rework from the painter. No callbacks.

How it works

Simple, clean, on schedule — Poly-B Repair in Garneau

Free quote

We come out to your Garneau property, take a real look at the poly-b repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every poly-b repair quote in Garneau starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the poly-b repair in Garneau. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Garneau home while we finish the poly-b repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished poly-b repair with us and you're happy with the result in Garneau. If anything needs a second look, we handle it before we call the job done.

FAQ — Poly-B Drywall Repair Garneau

Poly-B Drywall Repair Garneau: your questions answered

Do I need to wait for plumbing inspections before you repair the drywall in my Garneau home?: Yes. We do not close any cut-out in your Garneau home until the plumbing re-pipe is done and inspections have passed. Skip the inspection wait in Garneau and the closed wall gets cut back in — the Poly-B patch is billed twice. Our Garneau schedule follows your plumber and the inspection sign-off directly.
Can you coordinate with my plumber for the re-pipe in Garneau?: Yes. Give us a heads-up before the Garneau repipe and we sync directly with the plumber and the inspection timeline. This keeps the walls in your Garneau home closed as quickly as possible after the plumbing work is done.
How many wall and ceiling openings does a full poly-B re-pipe leave in a Garneau home?: How much patching a Garneau home needs depends on its layout and the re-pipe routing. A typical full re-pipe in a Edmonton-area home leaves 15 to 40 cut-outs. In Garneau we count all the cut-outs on site and quote one fixed price covering every one.
Do I need to wait for plumbing inspections before you repair the drywall in my Garneau home?: Yes. We do not close any cut-out in your Garneau home until the plumbing re-pipe is done and inspections have passed. Board over an Garneau opening before the inspection and the inspector re-cuts it — double the repair bill. In Garneau we sync with your plumber and slot in right after the inspections.
Can you match the wall and ceiling texture after the patches in Garneau?: Yes. Texture matching is part of every poly-B re-pipe drywall job we do in Garneau. Knockdown, smooth or any Garneau pattern — we match the surrounding surface so the Poly-B patches vanish under paint. This is not an add-on in Garneau — it is standard on every Poly-B patch.
How many wall and ceiling openings does a full poly-B re-pipe leave in an Garneau home?: How much patching an Garneau home needs depends on its layout and the re-pipe routing. A typical full re-pipe in a Edmonton-area home leaves 15 to 40 cut-outs. In Garneau we count all the cut-outs on site and quote one fixed price covering every one.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Poly-B Drywall Repair Garneau

Poly-B re-pipe drywall repair in Garneau