Does the Fraser board spec follow code requirements?

Yes — Fraser separations get fire-rated board; wet areas get moisture-resistant. We board your Fraser project to spec so it passes inspection.

Do you coordinate with my other trades in Fraser?

Yes — we slot into the build schedule and coordinate with framers, electricians and plumbers so the drywall stage keeps your Fraser project moving.

Will the correct board go where Fraser code demands it?

Yes — Type X where Fraser garages and suites meet the house, moisture-resistant board in wet zones. We board your Fraser project to spec so it passes inspection.

Can you finish a Fraser new build to Level 5?

Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Fraser build.

Is Level 5 available on Fraser new construction?

Yes — we finish new construction to a flat Level 4 or, where the paint spec calls for it, a full Level 5 skim on feature areas in your Fraser build.

Do you stand behind your new construction drywall in Fraser?

Yes. We walk the finished Fraser job with you before we hand it off for paint, and if something is not right we come back and make it right.

New Construction Drywall Fraser

New construction drywall in Fraser, boarded and finished right

On a Fraser new build the drywall sets everything: square boarding, tight taping and a flat finish let paint and trim land right. In Fraser we board, tape, mud and finish new construction to a smooth Level 4 or 5, with fire-rated, moisture-resistant and soundproof board wherever the plan calls for it. Fraser is an Northeast community with a mix of older homes and newer builds, so new-construction work here is steady. We cover Fraser, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Coordinated with your other trades and timeline
Fraser coverage — we come to you
Level 4 or Level 5 finishing
Fire-rated, moisture-resistant and soundproof board to spec
Basement and secondary-suite drywall
Additions, infills and second-storey builds
Full new-build boarding and finishing in Fraser

Boarding new builds, additions and suites in Fraser

New homes and additions

In Fraser we board and finish complete new homes, additions and infills, coordinating with framers, electricians and plumbers so the drywall stage keeps the build on schedule.

Basements and secondary suites

Basement development and secondary suites are common — we board these with fire-rated and soundproof assemblies to the suite spec. Related Fraser services: Legal Suite Drywall Edmonton and Basement Drywall Edmonton.

Fraser drywall in context

About Fraser

Named for John Fraser, an original homesteader in the area and one of the first trustees of the Belmont School, Fraser is located in the City's far northwest.

What we see in Fraser

In Fraser the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Boarding new builds, additions and suites in Fraser

New homes and additions

In Fraser we board and finish complete new homes, additions and infills, coordinating with framers, electricians and plumbers so the drywall stage keeps the build on schedule.

Basements and secondary suites

Basement development and secondary suites are common — we board these with fire-rated and soundproof assemblies to the suite spec. Fraser projects can also draw on Legal Suite Drywall Edmonton and Basement Drywall Edmonton.

Our Fraser new construction process, step by step

Board square and to spec

A clean finish in Fraser starts with boarding — we hang square and tight, stagger joints and put the right board type on every surface the plan specifies.

Tape, coat and finish

We tape, apply mud coats with full drying time between each, then sand to a flat Level 4 or 5. Rushed coats are the top reason new-build drywall cracks or shows seams later; on Fraser jobs we give each coat its time and check under light before paint hand-off.

Our Fraser new construction process, step by step

Board square and to spec

A clean finish in Fraser starts with boarding — we hang square and tight, stagger joints and put the right board type on every surface the plan specifies.

Tape, coat and finish

We tape, apply mud coats with full drying time between each, then sand to a flat Level 4 or 5. Most later cracking and seam-shadowing on new builds comes from hurried coats — in Fraser we let every coat cure and light-check before handing off for paint.

Our Fraser new construction process, step by step

Board square and to spec

A clean finish in Fraser starts with boarding — we hang square and tight, stagger joints and put the right board type on every surface the plan specifies.

Tape, coat and finish

We tape, apply mud coats with full drying time between each, then sand to a flat Level 4 or 5. New-build drywall that cracks or telegraphs seams usually had its coats rushed; the Fraser schedule allows full drying, plus a light check before paint.

Why Fraser homeowners and builders trust Emplastrum

Showhome-standard finishing

We are a mudding and taping specialist, so the finish on your Fraser new build is the same standard we put on showhomes across Edmonton — flat, clean and ready for paint.

Fixed price, on schedule

We do new construction drywall across Fraser and Northeast, 7 days a week. You get the Fraser number before we start, a tidy site, coordinated trades and backed work. Any issue on a Fraser job earns a return trip and a proper fix.

How it works

Simple, clean, on schedule — New Construction Drywall in Fraser

Free quote

We come out to your Fraser property, take a real look at the new construction drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every new construction drywall quote in Fraser starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the new construction drywall in Fraser. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Fraser home while we finish the new construction drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished new construction drywall with us and you're happy with the result in Fraser. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the new construction drywall contractor Fraser trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your new construction drywall project in Fraser.

Read our reviews on Google

FAQ — New Construction Drywall Fraser