Where is fire-rated drywall required?

Garage separations, legal suites and party walls are where Westridge homes typically need rated Type X assemblies. We confirm what your Westridge project needs.

Can you finish the fire-rated board too?

Yes — your Westridge separation passes code and looks properly finished, ready for paint.

Where is fire-rated drywall required?

The standard Westridge fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Westridge project needs.

Can you finish the fire-rated board too?

Yes — the Westridge assembly meets code and leaves paint-ready — compliant and good-looking.

Can you finish the fire-rated board too?

Yes — code-met and clean-finished: the Westridge rated assembly comes out paint-ready.

Do you stand behind your fire-rated work in Westridge?

Yes. We install to code and walk the Westridge job with you, and if something is not right we come back and make it right.

Fire-Rated Drywall Westridge | Fire-Rated Drywall

Fire-rated drywall in Westridge, installed to code

Where code requires it in Westridge, fire-rated board is mandatory: garage-to-house separations, suites and party walls take Type X in a rated assembly — for inspection and for safety. In Westridge we install fire-rated drywall to code and finish it clean. Westridge is an West Edmonton community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Westridge, Aldergrove, Belmead, Callingwood North and West Edmonton, 7 days a week.

Type X fire-rated board to code in Westridge
Finished clean and inspection-ready
Westridge coverage — we come to you
Rated assemblies installed and sealed correctly
Party walls between units
Basement legal-suite fire separations
Garage-to-house firewall separations

Common fire-rated situations in Westridge

Finished garages and new builds

Fire-rated work here is common when garages are finished and on new builds and additions where the separations are part of the spec.

Suite conversions

When an Westridge basement is converted to a legal suite, the fire separation between the suite and the main floor is a code requirement we handle as part of the drywall.

Westridge drywall in context

About Westridge

Westridge is a long narrow neighbourhood extending into the North Saskatchewan River Valley.

What we see in Westridge

In Westridge the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Our Westridge fire-rated drywall process, step by step

Right board, right build-up

In Westridge we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. The Westridge deliverable: a separation that passes inspection, meets code and looks complete.

Fire-rated garages, suites and party walls in Westridge

Garage firewalls

The most common fire-rated job in Westridge is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Westridge homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

What affects the cost of fire-rated drywall in Westridge?

Area and assembly

The cost in Westridge depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. In Westridge, the required rating sets the assembly build-up — and Type X runs above standard board on cost. We price off the spec and a site look.

Passing inspection in Westridge

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Westridge project passes the first time.

Our Westridge fire-rated drywall process, step by step

Right board, right build-up

In Westridge we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Westridge separation the inspector approves and the eye approves too.

Why Westridge homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Westridge we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Westridge and West Edmonton, 7 days a week. You get the Westridge number before we start, a tidy site and work we stand behind. Any issue on an Westridge job earns a return trip and a proper fix.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Westridge

Free quote

We come out to your Westridge property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Westridge starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Westridge. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Westridge home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Westridge. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Westridge trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Westridge.

Read our reviews on Google

FAQ — Fire-Rated Drywall Westridge

Fire-Rated Drywall Westridge: your questions answered

Where is fire-rated drywall required?: Garage separations, legal suites and party walls are where Westridge homes typically need rated Type X assemblies. We confirm what your Westridge project needs.
Can you finish the fire-rated board too?: Yes — your Westridge separation passes code and looks properly finished, ready for paint.
Where is fire-rated drywall required?: The standard Westridge fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Westridge project needs.
Can you finish the fire-rated board too?: Yes — the Westridge assembly meets code and leaves paint-ready — compliant and good-looking.
Can you finish the fire-rated board too?: Yes — code-met and clean-finished: the Westridge rated assembly comes out paint-ready.
Do you stand behind your fire-rated work in Westridge?: Yes. We install to code and walk the Westridge job with you, and if something is not right we come back and make it right.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Westridge

Fire-rated drywall in Westridge, installed to code