Can you finish the fire-rated board too?

Yes — the Walker assembly meets code and leaves paint-ready — compliant and good-looking.

Can you finish the fire-rated board too?

Yes — code-met and clean-finished: the Walker rated assembly comes out paint-ready.

Do you stand behind your fire-rated work in Walker?

Yes. We install to code and walk the Walker job with you, and if something is not right we come back and make it right.

Will it pass inspection in Walker?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Walker separation passes inspection.

Do you install fire-rated drywall in Walker?

Yes — fire-rated drywall in Walker is part of our regular work, and we are usually booked within the week. We also cover Charlesworth, Decoteau, Ellerslie and Ellerslie.

Where is fire-rated drywall required?

In Walker, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Walker project needs.

Fire-Rated Drywall Walker | Fire-Rated Drywall

Fire-rated drywall in Walker, installed to code

In Walker the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Walker we install fire-rated drywall to code and finish it clean. Walker is an Ellerslie community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Walker, Charlesworth, Decoteau, Ellerslie and Ellerslie, 7 days a week.

Basement legal-suite fire separations
Garage-to-house firewall separations
Type X fire-rated board to code in Walker
Finished clean and inspection-ready
Walker coverage — we come to you
Rated assemblies installed and sealed correctly
Party walls between units

Why Walker homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Walker we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Walker and Ellerslie, 7 days a week. You get the Walker number before we start, a tidy site and work we stand behind. Any issue on an Walker job earns a return trip and a proper fix.

Walker drywall in context

What we see in Walker

In Walker the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

What affects the cost of fire-rated drywall in Walker?

Area and assembly

The cost in Walker depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Walker rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Walker

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Walker project passes the first time.

Fire-rated garages, suites and party walls in Walker

Garage firewalls

The most common fire-rated job in Walker is the garage-to-house separation — Type X board on the common wall and ceiling. To-code install and finish.

Party walls and legal suites

Both are regular calls across Walker. We build the rated separations these require. See our legal suite drywall page.

Why Walker homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Walker we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Walker and Ellerslie, 7 days a week. You get the Walker number before we start, a tidy site and work we stand behind. Any issue on a Walker job earns a return trip and a proper fix.

Our Walker fire-rated drywall process, step by step

Right board, right build-up

In Walker we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. Code-compliant, inspection-ready and visually finished — the Walker outcome.

Common fire-rated situations in Walker

Finished garages and new builds

Fire-rated work here is common when garages are finished and on new builds and additions where the separations are part of the spec.

Suite conversions

When a Walker basement is converted to a legal suite, the fire separation between the suite and the main floor is a code requirement we handle as part of the drywall.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Walker

Free quote

We come out to your Walker property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Walker starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Walker. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Walker home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Walker. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Walker trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Walker.

Read our reviews on Google

FAQ — Fire-Rated Drywall Walker

Fire-Rated Drywall Walker: your questions answered

Can you finish the fire-rated board too?: Yes — the Walker assembly meets code and leaves paint-ready — compliant and good-looking.
Can you finish the fire-rated board too?: Yes — code-met and clean-finished: the Walker rated assembly comes out paint-ready.
Do you stand behind your fire-rated work in Walker?: Yes. We install to code and walk the Walker job with you, and if something is not right we come back and make it right.
Will it pass inspection in Walker?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Walker separation passes inspection.
Do you install fire-rated drywall in Walker?: Yes — fire-rated drywall in Walker is part of our regular work, and we are usually booked within the week. We also cover Charlesworth, Decoteau, Ellerslie and Ellerslie.
Where is fire-rated drywall required?: In Walker, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Walker project needs.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Walker

Fire-rated drywall in Walker, installed to code