Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Fire-rated drywall in Tawa, installed to code

Where code requires it in Tawa, fire-rated board is mandatory: garage-to-house separations, suites and party walls take Type X in a rated assembly — for inspection and for safety. In Tawa we install fire-rated drywall to code and finish it clean. Tawa is an Mill Woods and Meadows community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Tawa, Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows, 7 days a week.

Fire-Rated Drywall Tawa

Watch fire-rated drywall jobs in Tawa on our YouTube channel

What affects the cost of fire-rated drywall in Tawa?

Area and assembly

The cost in Tawa depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. Expect Type X to price above regular board; the Tawa assembly build follows the rating. We price off the spec and a site look.

Passing inspection in Tawa

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Tawa project passes the first time.

Tawa drywall in context

About Tawa

Tawa means "you are welcome" in the Cree language to honour Aboriginal leaders and history.

What we see in Tawa

In Tawa the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Why Tawa homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Tawa we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Tawa and Mill Woods and Meadows, 7 days a week. The Tawa quote is free and the price fixed — clean site, backed workmanship. Not right in Tawa? We come back and correct it.

Why Tawa homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Tawa we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Tawa and Mill Woods and Meadows, 7 days a week. Fixed pricing on free Tawa quotes, a clean site and a guarantee on the work. When an Tawa job is not right, we make it right — on us.

Fire-rated garages, suites and party walls in Tawa

Garage firewalls

The most common fire-rated job in Tawa is the garage-to-house separation — Type X board on the common wall and ceiling. Installed and finished to code.

Suites and party walls

Tawa sees steady legal-suite and party-wall work. We build the rated separations these require. See our legal suite drywall page.

Common fire-rated situations in Tawa

Finished garages and new builds

Fire-rated work here is common when garages are finished and on new builds and additions where the separations are part of the spec.

Suite conversions

When an Tawa basement is converted to a legal suite, the fire separation between the suite and the main floor is a code requirement we handle as part of the drywall.

Our Tawa fire-rated drywall process, step by step

Right board, right build-up

In Tawa we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. The Tawa deliverable: a separation that passes inspection, meets code and looks complete.

Simple, clean, on schedule — Fire-Rated Drywall in Tawa

1

Free quote

We come out to your Tawa property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Tawa starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Tawa. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Tawa home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Tawa. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

Emplastrum Drywall is the fire-rated drywall contractor Tawa trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Tawa.

Read our reviews on Google

Fire-Rated Drywall Tawa: your questions answered

Do you install fire-rated drywall in Tawa?
Yes — fire-rated drywall in Tawa is part of our regular work, and we are usually booked within the week. We also cover Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows.
Where is fire-rated drywall required?
In Tawa, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Tawa project needs.
Where is fire-rated drywall required?
Garage separations, legal suites and party walls are where Tawa homes typically need rated Type X assemblies. We confirm what your Tawa project needs.
Can you finish the fire-rated board too?
Yes — your Tawa separation passes code and looks properly finished, ready for paint.
Where is fire-rated drywall required?
The standard Tawa fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Tawa project needs.
Can you finish the fire-rated board too?
Yes — the Tawa assembly meets code and leaves paint-ready — compliant and good-looking.
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook