Can you finish the fire-rated board too?

Yes — code-met and clean-finished: the Queen Mary Park rated assembly comes out paint-ready.

Do you stand behind your fire-rated work in Queen Mary Park?

Yes. We install to code and walk the Queen Mary Park job with you, and if something is not right we come back and make it right.

Will it pass inspection in Queen Mary Park?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Queen Mary Park separation passes inspection.

Do you install fire-rated drywall in Queen Mary Park?

Yes — fire-rated drywall in Queen Mary Park is part of our regular work, and we are usually booked within the week. We also cover Boyle Street, Central McDougall, Dovercourt and Central.

Where is fire-rated drywall required?

In Queen Mary Park, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Queen Mary Park project needs.

Where is fire-rated drywall required?

Garage separations, legal suites and party walls are where Queen Mary Park homes typically need rated Type X assemblies. We confirm what your Queen Mary Park project needs.

Fire-Rated Drywall Queen Mary Park | Fire-Rated Drywall

Fire-rated drywall in Queen Mary Park, installed to code

In Queen Mary Park the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Queen Mary Park we install fire-rated drywall to code and finish it clean. Queen Mary Park is this established Central community where reno, repair and ceiling drywall are common, so fire-rated work here is common on garages and suites. We cover Queen Mary Park, Boyle Street, Central McDougall, Dovercourt and Central, 7 days a week.

Type X fire-rated board to code in Queen Mary Park
Finished clean and inspection-ready
Queen Mary Park coverage — we come to you
Rated assemblies installed and sealed correctly
Party walls between units
Basement legal-suite fire separations
Garage-to-house firewall separations

Why Queen Mary Park homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Queen Mary Park we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Queen Mary Park and Central, 7 days a week. Fixed pricing on free Queen Mary Park quotes, a clean site and a guarantee on the work. When an Queen Mary Park job is not right, we make it right — on us.

Queen Mary Park drywall in context

About Queen Mary Park

Lying just north of the City's business district in what was once the old Hudson Bay Company Reserve, this inner-city neighbourhood was not fully developed until the 1950s.

What we see in Queen Mary Park

In Queen Mary Park the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Fire-rated garages, suites and party walls in Queen Mary Park

Garage firewalls

The most common fire-rated job in Queen Mary Park is the garage-to-house separation — Type X board on the common wall and ceiling. Installed and finished to code.

Suites and party walls

Queen Mary Park sees steady legal-suite and party-wall work. We build the rated separations these require. See our legal suite drywall page.

Common fire-rated situations in Queen Mary Park

Finished garages and new builds

Fire-rated work here is common when garages are finished and on new builds and additions where the separations are part of the spec.

Suite conversions

When an Queen Mary Park basement is converted to a legal suite, the fire separation between the suite and the main floor is a code requirement we handle as part of the drywall.

Our Queen Mary Park fire-rated drywall process, step by step

Right board, right build-up

In Queen Mary Park we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. The Queen Mary Park deliverable: a separation that passes inspection, meets code and looks complete.

Fire-rated garages, suites and party walls in Queen Mary Park

Garage firewalls

The most common fire-rated job in Queen Mary Park is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Queen Mary Park homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

What affects the cost of fire-rated drywall in Queen Mary Park?

Area and assembly

The cost in Queen Mary Park depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. In Queen Mary Park, the required rating sets the assembly build-up — and Type X runs above standard board on cost. We price off the spec and a site look.

Passing inspection in Queen Mary Park

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Queen Mary Park project passes the first time.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Queen Mary Park

Free quote

We come out to your Queen Mary Park property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Queen Mary Park starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Queen Mary Park. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Queen Mary Park home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Queen Mary Park. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Queen Mary Park trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Queen Mary Park.

Read our reviews on Google

FAQ — Fire-Rated Drywall Queen Mary Park

Fire-Rated Drywall Queen Mary Park: your questions answered

Can you finish the fire-rated board too?: Yes — code-met and clean-finished: the Queen Mary Park rated assembly comes out paint-ready.
Do you stand behind your fire-rated work in Queen Mary Park?: Yes. We install to code and walk the Queen Mary Park job with you, and if something is not right we come back and make it right.
Will it pass inspection in Queen Mary Park?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Queen Mary Park separation passes inspection.
Do you install fire-rated drywall in Queen Mary Park?: Yes — fire-rated drywall in Queen Mary Park is part of our regular work, and we are usually booked within the week. We also cover Boyle Street, Central McDougall, Dovercourt and Central.
Where is fire-rated drywall required?: In Queen Mary Park, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Queen Mary Park project needs.
Where is fire-rated drywall required?: Garage separations, legal suites and party walls are where Queen Mary Park homes typically need rated Type X assemblies. We confirm what your Queen Mary Park project needs.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Queen Mary Park

Fire-rated drywall in Queen Mary Park, installed to code