Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Fire-rated drywall in Pollard Meadows, installed to code

In Pollard Meadows the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Pollard Meadows we install fire-rated drywall to code and finish it clean. Pollard Meadows is an Mill Woods and Meadows community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Pollard Meadows, Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows, 7 days a week.

Fire-Rated Drywall Pollard Meadows

Watch fire-rated drywall jobs in Pollard Meadows on our YouTube channel

What affects the cost of fire-rated drywall in Pollard Meadows?

Area and assembly

The cost in Pollard Meadows depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. In Pollard Meadows, the required rating sets the assembly build-up — and Type X runs above standard board on cost. We price off the spec and a site look.

Passing inspection in Pollard Meadows

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Pollard Meadows project passes the first time.

Pollard Meadows drywall in context

About Pollard Meadows

Pollard Meadows is one of the 27 neighbourhoods of Mill Woods.

What we see in Pollard Meadows

In Pollard Meadows the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Our Pollard Meadows fire-rated drywall process, step by step

Right board, right build-up

In Pollard Meadows we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Pollard Meadows separation the inspector approves and the eye approves too.

Why Pollard Meadows homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Pollard Meadows we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Pollard Meadows and Mill Woods and Meadows, 7 days a week. You get the Pollard Meadows number before we start, a tidy site and work we stand behind. Any issue on an Pollard Meadows job earns a return trip and a proper fix.

What affects the cost of fire-rated drywall in Pollard Meadows?

Area and assembly

The cost in Pollard Meadows depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Pollard Meadows rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Pollard Meadows

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Pollard Meadows project passes the first time.

Fire-rated garages, suites and party walls in Pollard Meadows

Garage firewalls

The most common fire-rated job in Pollard Meadows is the garage-to-house separation — Type X board on the common wall and ceiling. To-code install and finish.

Party walls and legal suites

Both are regular calls across Pollard Meadows. We build the rated separations these require. See our legal suite drywall page.

Why Pollard Meadows homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Pollard Meadows we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Pollard Meadows and Mill Woods and Meadows, 7 days a week. You get the Pollard Meadows number before we start, a tidy site and work we stand behind. Any issue on a Pollard Meadows job earns a return trip and a proper fix.

Simple, clean, on schedule — Fire-Rated Drywall in Pollard Meadows

1

Free quote

We come out to your Pollard Meadows property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Pollard Meadows starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Pollard Meadows. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Pollard Meadows home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Pollard Meadows. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

Emplastrum Drywall is the fire-rated drywall contractor Pollard Meadows trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Pollard Meadows.

Read our reviews on Google

Fire-Rated Drywall Pollard Meadows: your questions answered

Can you finish the fire-rated board too?
Yes — the Pollard Meadows assembly meets code and leaves paint-ready — compliant and good-looking.
Can you finish the fire-rated board too?
Yes — code-met and clean-finished: the Pollard Meadows rated assembly comes out paint-ready.
Do you stand behind your fire-rated work in Pollard Meadows?
Yes. We install to code and walk the Pollard Meadows job with you, and if something is not right we come back and make it right.
Will it pass inspection in Pollard Meadows?
Yes — we install the correct Type X assembly and seal penetrations to spec so your Pollard Meadows separation passes inspection.
Do you install fire-rated drywall in Pollard Meadows?
Yes — fire-rated drywall in Pollard Meadows is part of our regular work, and we are usually booked within the week. We also cover Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows.
Where is fire-rated drywall required?
In Pollard Meadows, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Pollard Meadows project needs.
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook