Where is fire-rated drywall required?

Garage separations, legal suites and party walls are where McQueen homes typically need rated Type X assemblies. We confirm what your McQueen project needs.

Can you finish the fire-rated board too?

Yes — your McQueen separation passes code and looks properly finished, ready for paint.

Where is fire-rated drywall required?

The standard McQueen fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your McQueen project needs.

Can you finish the fire-rated board too?

Yes — the McQueen assembly meets code and leaves paint-ready — compliant and good-looking.

Can you finish the fire-rated board too?

Yes — code-met and clean-finished: the McQueen rated assembly comes out paint-ready.

Do you stand behind your fire-rated work in McQueen?

Yes. We install to code and walk the McQueen job with you, and if something is not right we come back and make it right.

Fire-Rated Drywall McQueen | Fire-Rated Drywall

Fire-rated drywall in McQueen, installed to code

No shortcuts on McQueen fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In McQueen we install fire-rated drywall to code and finish it clean. McQueen is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so fire-rated work here is common on garages and suites. We cover McQueen, Britannia Youngstown, Canora, Crestwood and Jasper Place, 7 days a week.

Basement legal-suite fire separations
Garage-to-house firewall separations
Type X fire-rated board to code in McQueen
Finished clean and inspection-ready
McQueen coverage — we come to you
Rated assemblies installed and sealed correctly
Party walls between units

Fire-rated garages, suites and party walls in McQueen

Garage firewalls

The most common fire-rated job in McQueen is the garage-to-house separation — Type X board on the common wall and ceiling. Installed and finished to code.

Suites and party walls

McQueen sees steady legal-suite and party-wall work. We build the rated separations these require. See our legal suite drywall page.

McQueen drywall in context

What we see in McQueen

In McQueen the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Common fire-rated situations in McQueen

Finished garages and new builds

Fire-rated work here is common when garages are finished and on new builds and additions where the separations are part of the spec.

Suite conversions

When an McQueen basement is converted to a legal suite, the fire separation between the suite and the main floor is a code requirement we handle as part of the drywall.

Our McQueen fire-rated drywall process, step by step

Right board, right build-up

In McQueen we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. The McQueen deliverable: a separation that passes inspection, meets code and looks complete.

Fire-rated garages, suites and party walls in McQueen

Garage firewalls

The most common fire-rated job in McQueen is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in McQueen homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

What affects the cost of fire-rated drywall in McQueen?

Area and assembly

The cost in McQueen depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. In McQueen, the required rating sets the assembly build-up — and Type X runs above standard board on cost. We price off the spec and a site look.

Passing inspection in McQueen

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your McQueen project passes the first time.

Our McQueen fire-rated drywall process, step by step

Right board, right build-up

In McQueen we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An McQueen separation the inspector approves and the eye approves too.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Mcqueen

Free quote

We come out to your Mcqueen property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Mcqueen starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Mcqueen. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Mcqueen home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Mcqueen. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Mcqueen trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Mcqueen.

Read our reviews on Google

FAQ — Fire-Rated Drywall McQueen

Fire-Rated Drywall McQueen: your questions answered

Where is fire-rated drywall required?: Garage separations, legal suites and party walls are where McQueen homes typically need rated Type X assemblies. We confirm what your McQueen project needs.
Can you finish the fire-rated board too?: Yes — your McQueen separation passes code and looks properly finished, ready for paint.
Where is fire-rated drywall required?: The standard McQueen fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your McQueen project needs.
Can you finish the fire-rated board too?: Yes — the McQueen assembly meets code and leaves paint-ready — compliant and good-looking.
Can you finish the fire-rated board too?: Yes — code-met and clean-finished: the McQueen rated assembly comes out paint-ready.
Do you stand behind your fire-rated work in McQueen?: Yes. We install to code and walk the McQueen job with you, and if something is not right we come back and make it right.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall McQueen

Fire-rated drywall in McQueen, installed to code