Can you finish the fire-rated board too?

Yes — your Leger separation passes code and looks properly finished, ready for paint.

Where is fire-rated drywall required?

The standard Leger fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Leger project needs.

Can you finish the fire-rated board too?

Yes — the Leger assembly meets code and leaves paint-ready — compliant and good-looking.

Can you finish the fire-rated board too?

Yes — code-met and clean-finished: the Leger rated assembly comes out paint-ready.

Do you stand behind your fire-rated work in Leger?

Yes. We install to code and walk the Leger job with you, and if something is not right we come back and make it right.

Will it pass inspection in Leger?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Leger separation passes inspection.

Fire-Rated Drywall Leger | Fire-Rated Drywall

Fire-rated drywall in Leger, installed to code

In Leger the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Leger we install fire-rated drywall to code and finish it clean. Leger is an Whitemud community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Leger, Aspen Gardens, Bearspaw, Blue Quill and Whitemud, 7 days a week.

Rated assemblies installed and sealed correctly
Party walls between units
Basement legal-suite fire separations
Garage-to-house firewall separations
Type X fire-rated board to code in Leger
Finished clean and inspection-ready
Leger coverage — we come to you

What affects the cost of fire-rated drywall in Leger?

Area and assembly

The cost in Leger depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Leger rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Leger

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Leger project passes the first time.

Leger drywall in context

About Leger

The Leger neighbourhood was named after a long serving Edmonton politician, Edmund Hugh Leger, who was first elected to City Council in 1959 and went on to serve as an alderman for 25 years.

What we see in Leger

In Leger the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

Fire-rated garages, suites and party walls in Leger

Garage firewalls

The most common fire-rated job in Leger is the garage-to-house separation — Type X board on the common wall and ceiling. To-code install and finish.

Party walls and legal suites

Both are regular calls across Leger. We build the rated separations these require. See our legal suite drywall page.

Why Leger homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Leger we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Leger and Whitemud, 7 days a week. You get the Leger number before we start, a tidy site and work we stand behind. Any issue on a Leger job earns a return trip and a proper fix.

Our Leger fire-rated drywall process, step by step

Right board, right build-up

In Leger we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. Code-compliant, inspection-ready and visually finished — the Leger outcome.

Common fire-rated situations in Leger

Finished garages and new builds

Fire-rated work here is common when garages are finished and on new builds and additions where the separations are part of the spec.

Suite conversions

When a Leger basement is converted to a legal suite, the fire separation between the suite and the main floor is a code requirement we handle as part of the drywall.

What affects the cost of fire-rated drywall in Leger?

Area and assembly

The cost in Leger depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. Expect Type X to price above regular board; the Leger assembly build follows the rating. We price off the spec and a site look.

Passing inspection in Leger

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Leger

Free quote

We come out to your Leger property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Leger starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Leger. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Leger home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Leger. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Leger trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Leger.

Read our reviews on Google

FAQ — Fire-Rated Drywall Leger

Fire-Rated Drywall Leger: your questions answered

Can you finish the fire-rated board too?: Yes — your Leger separation passes code and looks properly finished, ready for paint.
Where is fire-rated drywall required?: The standard Leger fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Leger project needs.
Can you finish the fire-rated board too?: Yes — the Leger assembly meets code and leaves paint-ready — compliant and good-looking.
Can you finish the fire-rated board too?: Yes — code-met and clean-finished: the Leger rated assembly comes out paint-ready.
Do you stand behind your fire-rated work in Leger?: Yes. We install to code and walk the Leger job with you, and if something is not right we come back and make it right.
Will it pass inspection in Leger?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Leger separation passes inspection.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Leger

Fire-rated drywall in Leger, installed to code