Do you stand behind your fire-rated work in Lee Ridge?

Yes. We install to code and walk the Lee Ridge job with you, and if something is not right we come back and make it right.

Will it pass inspection in Lee Ridge?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Lee Ridge separation passes inspection.

Do you install fire-rated drywall in Lee Ridge?

Yes — fire-rated drywall in Lee Ridge is part of our regular work, and we are usually booked within the week. We also cover Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows.

Where is fire-rated drywall required?

In Lee Ridge, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Lee Ridge project needs.

Where is fire-rated drywall required?

Garage separations, legal suites and party walls are where Lee Ridge homes typically need rated Type X assemblies. We confirm what your Lee Ridge project needs.

Can you finish the fire-rated board too?

Yes — your Lee Ridge separation passes code and looks properly finished, ready for paint.

Fire-Rated Drywall Lee Ridge | Fire-Rated Drywall

Fire-rated drywall in Lee Ridge, installed to code

In Lee Ridge the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Lee Ridge we install fire-rated drywall to code and finish it clean. Lee Ridge is an Mill Woods and Meadows community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Lee Ridge, Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows, 7 days a week.

Finished clean and inspection-ready
Lee Ridge coverage — we come to you
Rated assemblies installed and sealed correctly
Party walls between units
Basement legal-suite fire separations
Garage-to-house firewall separations
Type X fire-rated board to code in Lee Ridge

Our Lee Ridge fire-rated drywall process, step by step

Right board, right build-up

In Lee Ridge we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Lee Ridge separation the inspector approves and the eye approves too.

Lee Ridge drywall in context

About Lee Ridge

Lee Ridge, named for Robert Lee (Mayor of Edmonton, 1909 - 1910), is one of the 27 neighbourhoods of Mill Woods.

What we see in Lee Ridge

In Lee Ridge the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Why Lee Ridge homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Lee Ridge we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Lee Ridge and Mill Woods and Meadows, 7 days a week. You get the Lee Ridge number before we start, a tidy site and work we stand behind. Any issue on an Lee Ridge job earns a return trip and a proper fix.

What affects the cost of fire-rated drywall in Lee Ridge?

Area and assembly

The cost in Lee Ridge depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Lee Ridge rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Lee Ridge

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Lee Ridge project passes the first time.

Fire-rated garages, suites and party walls in Lee Ridge

Garage firewalls

The most common fire-rated job in Lee Ridge is the garage-to-house separation — Type X board on the common wall and ceiling. To-code install and finish.

Party walls and legal suites

Both are regular calls across Lee Ridge. We build the rated separations these require. See our legal suite drywall page.

Why Lee Ridge homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Lee Ridge we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Lee Ridge and Mill Woods and Meadows, 7 days a week. You get the Lee Ridge number before we start, a tidy site and work we stand behind. Any issue on a Lee Ridge job earns a return trip and a proper fix.

Our Lee Ridge fire-rated drywall process, step by step

Right board, right build-up

In Lee Ridge we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. Code-compliant, inspection-ready and visually finished — the Lee Ridge outcome.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Lee Ridge

Free quote

We come out to your Lee Ridge property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Lee Ridge starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Lee Ridge. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Lee Ridge home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Lee Ridge. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Lee Ridge trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Lee Ridge.

Read our reviews on Google

FAQ — Fire-Rated Drywall Lee Ridge

Fire-Rated Drywall Lee Ridge: your questions answered

Do you stand behind your fire-rated work in Lee Ridge?: Yes. We install to code and walk the Lee Ridge job with you, and if something is not right we come back and make it right.
Will it pass inspection in Lee Ridge?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Lee Ridge separation passes inspection.
Do you install fire-rated drywall in Lee Ridge?: Yes — fire-rated drywall in Lee Ridge is part of our regular work, and we are usually booked within the week. We also cover Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows.
Where is fire-rated drywall required?: In Lee Ridge, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Lee Ridge project needs.
Where is fire-rated drywall required?: Garage separations, legal suites and party walls are where Lee Ridge homes typically need rated Type X assemblies. We confirm what your Lee Ridge project needs.
Can you finish the fire-rated board too?: Yes — your Lee Ridge separation passes code and looks properly finished, ready for paint.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Lee Ridge

Fire-rated drywall in Lee Ridge, installed to code