Where is fire-rated drywall required?

The standard Kenilworth fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Kenilworth project needs.

Can you finish the fire-rated board too?

Yes — the Kenilworth assembly meets code and leaves paint-ready — compliant and good-looking.

Can you finish the fire-rated board too?

Yes — code-met and clean-finished: the Kenilworth rated assembly comes out paint-ready.

Do you stand behind your fire-rated work in Kenilworth?

Yes. We install to code and walk the Kenilworth job with you, and if something is not right we come back and make it right.

Will it pass inspection in Kenilworth?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Kenilworth separation passes inspection.

Do you install fire-rated drywall in Kenilworth?

Yes — fire-rated drywall in Kenilworth is part of our regular work, and we are usually booked within the week. We also cover Avonmore, Bonnie Doon, Capilano and Southeast.

Fire-Rated Drywall Kenilworth | Fire-Rated Drywall

Fire-rated drywall in Kenilworth, installed to code

In Kenilworth the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Kenilworth we install fire-rated drywall to code and finish it clean. Kenilworth is this established Southeast community where reno, repair and ceiling drywall are common, so fire-rated work here is common on garages and suites. We cover Kenilworth, Avonmore, Bonnie Doon, Capilano and Southeast, 7 days a week.

Party walls between units
Basement legal-suite fire separations
Garage-to-house firewall separations
Type X fire-rated board to code in Kenilworth
Finished clean and inspection-ready
Kenilworth coverage — we come to you
Rated assemblies installed and sealed correctly

Why Kenilworth homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Kenilworth we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Kenilworth and Southeast, 7 days a week. Fixed pricing on free Kenilworth quotes, a clean site and a guarantee on the work. When an Kenilworth job is not right, we make it right — on us.

Kenilworth drywall in context

About Kenilworth

Kenilworth lies in the City's southeast, immediately north of the vibrant Whyte Avenue.

What we see in Kenilworth

In Kenilworth the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Fire-rated garages, suites and party walls in Kenilworth

Garage firewalls

The most common fire-rated job in Kenilworth is the garage-to-house separation — Type X board on the common wall and ceiling. Installed and finished to code.

Suites and party walls

Kenilworth sees steady legal-suite and party-wall work. We build the rated separations these require. See our legal suite drywall page.

Common fire-rated situations in Kenilworth

Finished garages and new builds

Fire-rated work here is common when garages are finished and on new builds and additions where the separations are part of the spec.

Suite conversions

When an Kenilworth basement is converted to a legal suite, the fire separation between the suite and the main floor is a code requirement we handle as part of the drywall.

Our Kenilworth fire-rated drywall process, step by step

Right board, right build-up

In Kenilworth we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. The Kenilworth deliverable: a separation that passes inspection, meets code and looks complete.

Fire-rated garages, suites and party walls in Kenilworth

Garage firewalls

The most common fire-rated job in Kenilworth is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Kenilworth homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

What affects the cost of fire-rated drywall in Kenilworth?

Area and assembly

The cost in Kenilworth depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. In Kenilworth, the required rating sets the assembly build-up — and Type X runs above standard board on cost. We price off the spec and a site look.

Passing inspection in Kenilworth

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Kenilworth project passes the first time.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Kenilworth

Free quote

We come out to your Kenilworth property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Kenilworth starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Kenilworth. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Kenilworth home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Kenilworth. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Kenilworth trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Kenilworth.

Read our reviews on Google

FAQ — Fire-Rated Drywall Kenilworth

Fire-Rated Drywall Kenilworth: your questions answered

Where is fire-rated drywall required?: The standard Kenilworth fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Kenilworth project needs.
Can you finish the fire-rated board too?: Yes — the Kenilworth assembly meets code and leaves paint-ready — compliant and good-looking.
Can you finish the fire-rated board too?: Yes — code-met and clean-finished: the Kenilworth rated assembly comes out paint-ready.
Do you stand behind your fire-rated work in Kenilworth?: Yes. We install to code and walk the Kenilworth job with you, and if something is not right we come back and make it right.
Will it pass inspection in Kenilworth?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Kenilworth separation passes inspection.
Do you install fire-rated drywall in Kenilworth?: Yes — fire-rated drywall in Kenilworth is part of our regular work, and we are usually booked within the week. We also cover Avonmore, Bonnie Doon, Capilano and Southeast.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Kenilworth

Fire-rated drywall in Kenilworth, installed to code