Can you finish the fire-rated board too?

Yes — code-met and clean-finished: the Inglewood rated assembly comes out paint-ready.

Do you stand behind your fire-rated work in Inglewood?

Yes. We install to code and walk the Inglewood job with you, and if something is not right we come back and make it right.

Will it pass inspection in Inglewood?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Inglewood separation passes inspection.

Do you install fire-rated drywall in Inglewood?

Yes — fire-rated drywall in Inglewood is part of our regular work, and we are usually booked within the week. We also cover Boyle Street, Central McDougall, Dovercourt and Central.

Where is fire-rated drywall required?

In Inglewood, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Inglewood project needs.

Where is fire-rated drywall required?

Garage separations, legal suites and party walls are where Inglewood homes typically need rated Type X assemblies. We confirm what your Inglewood project needs.

Fire-Rated Drywall Inglewood | Fire-Rated Drywall

Fire-rated drywall in Inglewood, installed to code

No shortcuts on Inglewood fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Inglewood we install fire-rated drywall to code and finish it clean. Inglewood is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so fire-rated work here is common on garages and suites. We cover Inglewood, Boyle Street, Central McDougall, Dovercourt and Central, 7 days a week.

Garage-to-house firewall separations
Type X fire-rated board to code in Inglewood
Finished clean and inspection-ready
Inglewood coverage — we come to you
Rated assemblies installed and sealed correctly
Party walls between units
Basement legal-suite fire separations

What affects the cost of fire-rated drywall in Inglewood?

Area and assembly

The cost in Inglewood depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. Expect Type X to price above regular board; the Inglewood assembly build follows the rating. We price off the spec and a site look.

Passing inspection in Inglewood

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Inglewood project passes the first time.

Inglewood drywall in context

About Inglewood

The name Inglewood was used on a 1905 plan of subdivision and is now applied to the neighbourhood.

What we see in Inglewood

In Inglewood the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Why Inglewood homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Inglewood we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Inglewood and Central, 7 days a week. The Inglewood quote is free and the price fixed — clean site, backed workmanship. Not right in Inglewood? We come back and correct it.

Why Inglewood homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Inglewood we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Inglewood and Central, 7 days a week. Fixed pricing on free Inglewood quotes, a clean site and a guarantee on the work. When an Inglewood job is not right, we make it right — on us.

Fire-rated garages, suites and party walls in Inglewood

Garage firewalls

The most common fire-rated job in Inglewood is the garage-to-house separation — Type X board on the common wall and ceiling. Installed and finished to code.

Suites and party walls

Inglewood sees steady legal-suite and party-wall work. We build the rated separations these require. See our legal suite drywall page.

Common fire-rated situations in Inglewood

Finished garages and new builds

Fire-rated work here is common when garages are finished and on new builds and additions where the separations are part of the spec.

Suite conversions

When an Inglewood basement is converted to a legal suite, the fire separation between the suite and the main floor is a code requirement we handle as part of the drywall.

Our Inglewood fire-rated drywall process, step by step

Right board, right build-up

In Inglewood we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. The Inglewood deliverable: a separation that passes inspection, meets code and looks complete.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Inglewood

Free quote

We come out to your Inglewood property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Inglewood starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Inglewood. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Inglewood home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Inglewood. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Inglewood trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Inglewood.

Read our reviews on Google

FAQ — Fire-Rated Drywall Inglewood

Fire-Rated Drywall Inglewood: your questions answered

Can you finish the fire-rated board too?: Yes — code-met and clean-finished: the Inglewood rated assembly comes out paint-ready.
Do you stand behind your fire-rated work in Inglewood?: Yes. We install to code and walk the Inglewood job with you, and if something is not right we come back and make it right.
Will it pass inspection in Inglewood?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Inglewood separation passes inspection.
Do you install fire-rated drywall in Inglewood?: Yes — fire-rated drywall in Inglewood is part of our regular work, and we are usually booked within the week. We also cover Boyle Street, Central McDougall, Dovercourt and Central.
Where is fire-rated drywall required?: In Inglewood, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Inglewood project needs.
Where is fire-rated drywall required?: Garage separations, legal suites and party walls are where Inglewood homes typically need rated Type X assemblies. We confirm what your Inglewood project needs.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Inglewood

Fire-rated drywall in Inglewood, installed to code