Can you finish the fire-rated board too?

Yes — code-met and clean-finished: the Highlands rated assembly comes out paint-ready.

Do you stand behind your fire-rated work in Highlands?

Yes. We install to code and walk the Highlands job with you, and if something is not right we come back and make it right.

Will it pass inspection in Highlands?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Highlands separation passes inspection.

Do you install fire-rated drywall in Highlands?

Yes — fire-rated drywall in Highlands is part of our regular work, and we are usually booked within the week. We also cover Abbottsfield, Alberta Avenue, Beacon Heights and North Central.

Where is fire-rated drywall required?

In Highlands, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Highlands project needs.

Where is fire-rated drywall required?

Garage separations, legal suites and party walls are where Highlands homes typically need rated Type X assemblies. We confirm what your Highlands project needs.

Fire-Rated Drywall Highlands | Fire-Rated Drywall

Fire-rated drywall in Highlands, installed to code

In Highlands the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Highlands we install fire-rated drywall to code and finish it clean. Highlands is an North Central community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Highlands, Abbottsfield, Alberta Avenue, Beacon Heights and North Central, 7 days a week.

Basement legal-suite fire separations
Garage-to-house firewall separations
Type X fire-rated board to code in Highlands
Finished clean and inspection-ready
Highlands coverage — we come to you
Rated assemblies installed and sealed correctly
Party walls between units

Why Highlands homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Highlands we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Highlands and North Central, 7 days a week. Fixed pricing on free Highlands quotes, a clean site and a guarantee on the work. When an Highlands job is not right, we make it right — on us.

Highlands drywall in context

About Highlands

Highlands, annexed to the city in 1912, was named in a contest offering a 50-dollar prize.

What we see in Highlands

In Highlands the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Fire-rated garages, suites and party walls in Highlands

Garage firewalls

The most common fire-rated job in Highlands is the garage-to-house separation — Type X board on the common wall and ceiling. Installed and finished to code.

Suites and party walls

Highlands sees steady legal-suite and party-wall work. We build the rated separations these require. See our legal suite drywall page.

Common fire-rated situations in Highlands

Finished garages and new builds

Fire-rated work here is common when garages are finished and on new builds and additions where the separations are part of the spec.

Suite conversions

When an Highlands basement is converted to a legal suite, the fire separation between the suite and the main floor is a code requirement we handle as part of the drywall.

Our Highlands fire-rated drywall process, step by step

Right board, right build-up

In Highlands we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. The Highlands deliverable: a separation that passes inspection, meets code and looks complete.

Fire-rated garages, suites and party walls in Highlands

Garage firewalls

The most common fire-rated job in Highlands is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Highlands homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

What affects the cost of fire-rated drywall in Highlands?

Area and assembly

The cost in Highlands depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. In Highlands, the required rating sets the assembly build-up — and Type X runs above standard board on cost. We price off the spec and a site look.

Passing inspection in Highlands

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Highlands project passes the first time.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Highlands

Free quote

We come out to your Highlands property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Highlands starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Highlands. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Highlands home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Highlands. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Highlands trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Highlands.

Read our reviews on Google

FAQ — Fire-Rated Drywall Highlands

Fire-Rated Drywall Highlands: your questions answered

Can you finish the fire-rated board too?: Yes — code-met and clean-finished: the Highlands rated assembly comes out paint-ready.
Do you stand behind your fire-rated work in Highlands?: Yes. We install to code and walk the Highlands job with you, and if something is not right we come back and make it right.
Will it pass inspection in Highlands?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Highlands separation passes inspection.
Do you install fire-rated drywall in Highlands?: Yes — fire-rated drywall in Highlands is part of our regular work, and we are usually booked within the week. We also cover Abbottsfield, Alberta Avenue, Beacon Heights and North Central.
Where is fire-rated drywall required?: In Highlands, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Highlands project needs.
Where is fire-rated drywall required?: Garage separations, legal suites and party walls are where Highlands homes typically need rated Type X assemblies. We confirm what your Highlands project needs.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Highlands

Fire-rated drywall in Highlands, installed to code