Can you finish the fire-rated board too?

Yes — your Hazeldean separation passes code and looks properly finished, ready for paint.

Where is fire-rated drywall required?

The standard Hazeldean fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Hazeldean project needs.

Can you finish the fire-rated board too?

Yes — the Hazeldean assembly meets code and leaves paint-ready — compliant and good-looking.

Can you finish the fire-rated board too?

Yes — code-met and clean-finished: the Hazeldean rated assembly comes out paint-ready.

Do you stand behind your fire-rated work in Hazeldean?

Yes. We install to code and walk the Hazeldean job with you, and if something is not right we come back and make it right.

Will it pass inspection in Hazeldean?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Hazeldean separation passes inspection.

Fire-Rated Drywall Hazeldean | Fire-Rated Drywall

Fire-rated drywall in Hazeldean, installed to code

No shortcuts on Hazeldean fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Hazeldean we install fire-rated drywall to code and finish it clean. Hazeldean is one of Scona's newer communities, where fresh installation and first-year settling work are common, so fire-rated work here is common on garages and suites. We cover Hazeldean, Allendale, Argyll, Belgravia and Scona, 7 days a week.

Hazeldean coverage — we come to you
Rated assemblies installed and sealed correctly
Party walls between units
Basement legal-suite fire separations
Garage-to-house firewall separations
Type X fire-rated board to code in Hazeldean
Finished clean and inspection-ready

Fire-rated garages, suites and party walls in Hazeldean

Garage firewalls

The most common fire-rated job in Hazeldean is the garage-to-house separation — Type X board on the common wall and ceiling. Installed and finished to code.

Suites and party walls

Hazeldean sees steady legal-suite and party-wall work. We build the rated separations these require. See our legal suite drywall page.

Hazeldean drywall in context

About Hazeldean

Hazeldean is located on an area identified as the land holding of I.

What we see in Hazeldean

In Hazeldean the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Common fire-rated situations in Hazeldean

Finished garages and new builds

Fire-rated work here is common when garages are finished and on new builds and additions where the separations are part of the spec.

Suite conversions

When an Hazeldean basement is converted to a legal suite, the fire separation between the suite and the main floor is a code requirement we handle as part of the drywall.

Our Hazeldean fire-rated drywall process, step by step

Right board, right build-up

In Hazeldean we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. The Hazeldean deliverable: a separation that passes inspection, meets code and looks complete.

Fire-rated garages, suites and party walls in Hazeldean

Garage firewalls

The most common fire-rated job in Hazeldean is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Hazeldean homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

What affects the cost of fire-rated drywall in Hazeldean?

Area and assembly

The cost in Hazeldean depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. In Hazeldean, the required rating sets the assembly build-up — and Type X runs above standard board on cost. We price off the spec and a site look.

Passing inspection in Hazeldean

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Hazeldean project passes the first time.

Our Hazeldean fire-rated drywall process, step by step

Right board, right build-up

In Hazeldean we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Hazeldean separation the inspector approves and the eye approves too.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Hazeldean

Free quote

We come out to your Hazeldean property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Hazeldean starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Hazeldean. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Hazeldean home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Hazeldean. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Hazeldean trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Hazeldean.

Read our reviews on Google

FAQ — Fire-Rated Drywall Hazeldean

Fire-Rated Drywall Hazeldean: your questions answered

Can you finish the fire-rated board too?: Yes — your Hazeldean separation passes code and looks properly finished, ready for paint.
Where is fire-rated drywall required?: The standard Hazeldean fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Hazeldean project needs.
Can you finish the fire-rated board too?: Yes — the Hazeldean assembly meets code and leaves paint-ready — compliant and good-looking.
Can you finish the fire-rated board too?: Yes — code-met and clean-finished: the Hazeldean rated assembly comes out paint-ready.
Do you stand behind your fire-rated work in Hazeldean?: Yes. We install to code and walk the Hazeldean job with you, and if something is not right we come back and make it right.
Will it pass inspection in Hazeldean?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Hazeldean separation passes inspection.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Hazeldean

Fire-rated drywall in Hazeldean, installed to code