Where is fire-rated drywall required?

The standard Fulton Place fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Fulton Place project needs.

Can you finish the fire-rated board too?

Yes — the Fulton Place assembly meets code and leaves paint-ready — compliant and good-looking.

Can you finish the fire-rated board too?

Yes — code-met and clean-finished: the Fulton Place rated assembly comes out paint-ready.

Do you stand behind your fire-rated work in Fulton Place?

Yes. We install to code and walk the Fulton Place job with you, and if something is not right we come back and make it right.

Will it pass inspection in Fulton Place?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Fulton Place separation passes inspection.

Do you install fire-rated drywall in Fulton Place?

Yes — fire-rated drywall in Fulton Place is part of our regular work, and we are usually booked within the week. We also cover Avonmore, Bonnie Doon, Capilano and Southeast.

Fire-Rated Drywall Fulton Place | Fire-Rated Drywall

Fire-rated drywall in Fulton Place, installed to code

Where code requires it in Fulton Place, fire-rated board is mandatory: garage-to-house separations, suites and party walls take Type X in a rated assembly — for inspection and for safety. In Fulton Place we install fire-rated drywall to code and finish it clean. Fulton Place is an Southeast community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Fulton Place, Avonmore, Bonnie Doon, Capilano and Southeast, 7 days a week.

Basement legal-suite fire separations
Garage-to-house firewall separations
Type X fire-rated board to code in Fulton Place
Finished clean and inspection-ready
Fulton Place coverage — we come to you
Rated assemblies installed and sealed correctly
Party walls between units

What affects the cost of fire-rated drywall in Fulton Place?

Area and assembly

The cost in Fulton Place depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Fulton Place rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Fulton Place

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Fulton Place project passes the first time.

Fulton Place drywall in context

About Fulton Place

Named for the creek which runs through the ravine on its west boundary, Fulton Place lies east of the downtown core and developed in the 1950s.

What we see in Fulton Place

In Fulton Place the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Fire-rated garages, suites and party walls in Fulton Place

Garage firewalls

The most common fire-rated job in Fulton Place is the garage-to-house separation — Type X board on the common wall and ceiling. To-code install and finish.

Party walls and legal suites

Both are regular calls across Fulton Place. We build the rated separations these require. See our legal suite drywall page.

Why Fulton Place homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Fulton Place we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Fulton Place and Southeast, 7 days a week. You get the Fulton Place number before we start, a tidy site and work we stand behind. Any issue on a Fulton Place job earns a return trip and a proper fix.

Our Fulton Place fire-rated drywall process, step by step

Right board, right build-up

In Fulton Place we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. Code-compliant, inspection-ready and visually finished — the Fulton Place outcome.

Common fire-rated situations in Fulton Place

Finished garages and new builds

Fire-rated work here is common when garages are finished and on new builds and additions where the separations are part of the spec.

Suite conversions

When a Fulton Place basement is converted to a legal suite, the fire separation between the suite and the main floor is a code requirement we handle as part of the drywall.

What affects the cost of fire-rated drywall in Fulton Place?

Area and assembly

The cost in Fulton Place depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. Expect Type X to price above regular board; the Fulton Place assembly build follows the rating. We price off the spec and a site look.

Passing inspection in Fulton Place

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Fulton Place

Free quote

We come out to your Fulton Place property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Fulton Place starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Fulton Place. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Fulton Place home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Fulton Place. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Fulton Place trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Fulton Place.

Read our reviews on Google

FAQ — Fire-Rated Drywall Fulton Place

Fire-Rated Drywall Fulton Place: your questions answered

Where is fire-rated drywall required?: The standard Fulton Place fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Fulton Place project needs.
Can you finish the fire-rated board too?: Yes — the Fulton Place assembly meets code and leaves paint-ready — compliant and good-looking.
Can you finish the fire-rated board too?: Yes — code-met and clean-finished: the Fulton Place rated assembly comes out paint-ready.
Do you stand behind your fire-rated work in Fulton Place?: Yes. We install to code and walk the Fulton Place job with you, and if something is not right we come back and make it right.
Will it pass inspection in Fulton Place?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Fulton Place separation passes inspection.
Do you install fire-rated drywall in Fulton Place?: Yes — fire-rated drywall in Fulton Place is part of our regular work, and we are usually booked within the week. We also cover Avonmore, Bonnie Doon, Capilano and Southeast.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Fulton Place

Fire-rated drywall in Fulton Place, installed to code