Where is fire-rated drywall required?

In Falconer Heights, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Falconer Heights project needs.

Where is fire-rated drywall required?

Garage separations, legal suites and party walls are where Falconer Heights homes typically need rated Type X assemblies. We confirm what your Falconer Heights project needs.

Can you finish the fire-rated board too?

Yes — your Falconer Heights separation passes code and looks properly finished, ready for paint.

Where is fire-rated drywall required?

The standard Falconer Heights fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Falconer Heights project needs.

Can you finish the fire-rated board too?

Yes — the Falconer Heights assembly meets code and leaves paint-ready — compliant and good-looking.

Can you finish the fire-rated board too?

Yes — code-met and clean-finished: the Falconer Heights rated assembly comes out paint-ready.

Fire-Rated Drywall Falconer Heights

Fire-rated drywall in Falconer Heights, installed to code

In Falconer Heights the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Falconer Heights we install fire-rated drywall to code and finish it clean. Falconer Heights is an Whitemud community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Falconer Heights, Aspen Gardens, Bearspaw, Blue Quill and Whitemud, 7 days a week.

Garage-to-house firewall separations
Type X fire-rated board to code in Falconer Heights
Finished clean and inspection-ready
Falconer Heights coverage — we come to you
Rated assemblies installed and sealed correctly
Party walls between units
Basement legal-suite fire separations

Common fire-rated situations in Falconer Heights

Finished garages and new builds

Fire-rated work here is common when garages are finished and on new builds and additions where the separations are part of the spec.

Suite conversions

When an Falconer Heights basement is converted to a legal suite, the fire separation between the suite and the main floor is a code requirement we handle as part of the drywall.

Falconer Heights drywall in context

About Falconer Heights

Falconer, who was involved in the formation of Edmonton's Names Advisory Committee in the mid 1950s and served on the committee until 1979.

What we see in Falconer Heights

In Falconer Heights the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Our Falconer Heights fire-rated drywall process, step by step

Right board, right build-up

In Falconer Heights we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. The Falconer Heights deliverable: a separation that passes inspection, meets code and looks complete.

Fire-rated garages, suites and party walls in Falconer Heights

Garage firewalls

The most common fire-rated job in Falconer Heights is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Falconer Heights homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

What affects the cost of fire-rated drywall in Falconer Heights?

Area and assembly

The cost in Falconer Heights depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. In Falconer Heights, the required rating sets the assembly build-up — and Type X runs above standard board on cost. We price off the spec and a site look.

Passing inspection in Falconer Heights

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Falconer Heights project passes the first time.

Our Falconer Heights fire-rated drywall process, step by step

Right board, right build-up

In Falconer Heights we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Falconer Heights separation the inspector approves and the eye approves too.

Why Falconer Heights homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Falconer Heights we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Falconer Heights and Whitemud, 7 days a week. You get the Falconer Heights number before we start, a tidy site and work we stand behind. Any issue on an Falconer Heights job earns a return trip and a proper fix.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Falconer Heights

Free quote

We come out to your Falconer Heights property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Falconer Heights starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Falconer Heights. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Falconer Heights home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Falconer Heights. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Falconer Heights trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Falconer Heights.

Read our reviews on Google

FAQ — Fire-Rated Drywall Falconer Heights