Can you finish the fire-rated board too?

Yes — the Evansdale assembly meets code and leaves paint-ready — compliant and good-looking.

Can you finish the fire-rated board too?

Yes — code-met and clean-finished: the Evansdale rated assembly comes out paint-ready.

Do you stand behind your fire-rated work in Evansdale?

Yes. We install to code and walk the Evansdale job with you, and if something is not right we come back and make it right.

Will it pass inspection in Evansdale?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Evansdale separation passes inspection.

Do you install fire-rated drywall in Evansdale?

Yes — fire-rated drywall in Evansdale is part of our regular work, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.

Where is fire-rated drywall required?

In Evansdale, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Evansdale project needs.

Fire-Rated Drywall Evansdale | Fire-Rated Drywall

Fire-rated drywall in Evansdale, installed to code

In Evansdale the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Evansdale we install fire-rated drywall to code and finish it clean. Evansdale is an Northwest community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Evansdale, Albany, Athlone, Baranow and Northwest, 7 days a week.

Finished clean and inspection-ready
Evansdale coverage — we come to you
Rated assemblies installed and sealed correctly
Party walls between units
Basement legal-suite fire separations
Garage-to-house firewall separations
Type X fire-rated board to code in Evansdale

Why Evansdale homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Evansdale we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Evansdale and Northwest, 7 days a week. The Evansdale quote is free and the price fixed — clean site, backed workmanship. Not right in Evansdale? We come back and correct it.

Evansdale drywall in context

What we see in Evansdale

In Evansdale the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Why Evansdale homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Evansdale we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Evansdale and Northwest, 7 days a week. Fixed pricing on free Evansdale quotes, a clean site and a guarantee on the work. When an Evansdale job is not right, we make it right — on us.

Fire-rated garages, suites and party walls in Evansdale

Garage firewalls

The most common fire-rated job in Evansdale is the garage-to-house separation — Type X board on the common wall and ceiling. Installed and finished to code.

Suites and party walls

Evansdale sees steady legal-suite and party-wall work. We build the rated separations these require. See our legal suite drywall page.

Common fire-rated situations in Evansdale

Finished garages and new builds

Fire-rated work here is common when garages are finished and on new builds and additions where the separations are part of the spec.

Suite conversions

When an Evansdale basement is converted to a legal suite, the fire separation between the suite and the main floor is a code requirement we handle as part of the drywall.

Our Evansdale fire-rated drywall process, step by step

Right board, right build-up

In Evansdale we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. The Evansdale deliverable: a separation that passes inspection, meets code and looks complete.

Fire-rated garages, suites and party walls in Evansdale

Garage firewalls

The most common fire-rated job in Evansdale is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Evansdale homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Evansdale

Free quote

We come out to your Evansdale property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Evansdale starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Evansdale. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Evansdale home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Evansdale. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Evansdale trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Evansdale.

Read our reviews on Google

FAQ — Fire-Rated Drywall Evansdale

Fire-Rated Drywall Evansdale: your questions answered

Can you finish the fire-rated board too?: Yes — the Evansdale assembly meets code and leaves paint-ready — compliant and good-looking.
Can you finish the fire-rated board too?: Yes — code-met and clean-finished: the Evansdale rated assembly comes out paint-ready.
Do you stand behind your fire-rated work in Evansdale?: Yes. We install to code and walk the Evansdale job with you, and if something is not right we come back and make it right.
Will it pass inspection in Evansdale?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Evansdale separation passes inspection.
Do you install fire-rated drywall in Evansdale?: Yes — fire-rated drywall in Evansdale is part of our regular work, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.
Where is fire-rated drywall required?: In Evansdale, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Evansdale project needs.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Evansdale

Fire-rated drywall in Evansdale, installed to code