Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Fire-rated drywall in Delton, installed to code

In Delton the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Delton we install fire-rated drywall to code and finish it clean. Delton is this established North Central community where reno, repair and ceiling drywall are common, so fire-rated work here is common on garages and suites. We cover Delton, Abbottsfield, Alberta Avenue, Beacon Heights and North Central, 7 days a week.

Fire-Rated Drywall Delton

Watch fire-rated drywall jobs in Delton on our YouTube channel

Our Delton fire-rated drywall process, step by step

Right board, right build-up

In Delton we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Delton separation the inspector approves and the eye approves too.

Delton drywall in context

About Delton

Delton has been part of Edmonton since 1910, a time when land speculators fuelled a tremendous expansion in the supply of vacant subdivisions.

What we see in Delton

In Delton the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Why Delton homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Delton we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Delton and North Central, 7 days a week. You get the Delton number before we start, a tidy site and work we stand behind. Any issue on an Delton job earns a return trip and a proper fix.

What affects the cost of fire-rated drywall in Delton?

Area and assembly

The cost in Delton depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Delton rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Delton

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Delton project passes the first time.

Fire-rated garages, suites and party walls in Delton

Garage firewalls

The most common fire-rated job in Delton is the garage-to-house separation — Type X board on the common wall and ceiling. To-code install and finish.

Party walls and legal suites

Both are regular calls across Delton. We build the rated separations these require. See our legal suite drywall page.

Why Delton homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Delton we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Delton and North Central, 7 days a week. You get the Delton number before we start, a tidy site and work we stand behind. Any issue on a Delton job earns a return trip and a proper fix.

Our Delton fire-rated drywall process, step by step

Right board, right build-up

In Delton we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. Code-compliant, inspection-ready and visually finished — the Delton outcome.

Simple, clean, on schedule — Fire-Rated Drywall in Delton

1

Free quote

We come out to your Delton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Delton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Delton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Delton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Delton. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

Emplastrum Drywall is the fire-rated drywall contractor Delton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Delton.

Read our reviews on Google

Fire-Rated Drywall Delton: your questions answered

Can you finish the fire-rated board too?
Yes — your Delton separation passes code and looks properly finished, ready for paint.
Where is fire-rated drywall required?
The standard Delton fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Delton project needs.
Can you finish the fire-rated board too?
Yes — the Delton assembly meets code and leaves paint-ready — compliant and good-looking.
Can you finish the fire-rated board too?
Yes — code-met and clean-finished: the Delton rated assembly comes out paint-ready.
Do you stand behind your fire-rated work in Delton?
Yes. We install to code and walk the Delton job with you, and if something is not right we come back and make it right.
Will it pass inspection in Delton?
Yes — we install the correct Type X assembly and seal penetrations to spec so your Delton separation passes inspection.
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook