Where is fire-rated drywall required?

The standard Casselman fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Casselman project needs.

Can you finish the fire-rated board too?

Yes — the Casselman assembly meets code and leaves paint-ready — compliant and good-looking.

Can you finish the fire-rated board too?

Yes — code-met and clean-finished: the Casselman rated assembly comes out paint-ready.

Do you stand behind your fire-rated work in Casselman?

Yes. We install to code and walk the Casselman job with you, and if something is not right we come back and make it right.

Will it pass inspection in Casselman?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Casselman separation passes inspection.

Do you install fire-rated drywall in Casselman?

Yes — fire-rated drywall in Casselman is part of our regular work, and we are usually booked within the week. We also cover Balwin, Bannerman, Belmont and Northeast.

Fire-Rated Drywall Casselman | Fire-Rated Drywall

Fire-rated drywall in Casselman, installed to code

No shortcuts on Casselman fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Casselman we install fire-rated drywall to code and finish it clean. Casselman is one of Northeast's newer communities, where fresh installation and first-year settling work are common, so fire-rated work here is common on garages and suites. We cover Casselman, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Party walls between units
Basement legal-suite fire separations
Garage-to-house firewall separations
Type X fire-rated board to code in Casselman
Finished clean and inspection-ready
Casselman coverage — we come to you
Rated assemblies installed and sealed correctly

Fire-rated garages, suites and party walls in Casselman

Garage firewalls

The most common fire-rated job in Casselman is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Casselman homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

What affects the cost of fire-rated drywall in Casselman?

Area and assembly

The cost in Casselman depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. In Casselman, the required rating sets the assembly build-up — and Type X runs above standard board on cost. We price off the spec and a site look.

Passing inspection in Casselman

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Casselman project passes the first time.

Our Casselman fire-rated drywall process, step by step

Right board, right build-up

In Casselman we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Casselman separation the inspector approves and the eye approves too.

Why Casselman homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Casselman we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Casselman and Northeast, 7 days a week. You get the Casselman number before we start, a tidy site and work we stand behind. Any issue on an Casselman job earns a return trip and a proper fix.

What affects the cost of fire-rated drywall in Casselman?

Area and assembly

The cost in Casselman depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Casselman rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Casselman

Fire-rated garages, suites and party walls in Casselman

Garage firewalls

The most common fire-rated job in Casselman is the garage-to-house separation — Type X board on the common wall and ceiling. To-code install and finish.

Party walls and legal suites

Both are regular calls across Casselman. We build the rated separations these require. See our legal suite drywall page.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Casselman

Free quote

We come out to your Casselman property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Casselman starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Casselman. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Casselman home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Casselman. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Casselman trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Casselman.

Read our reviews on Google

FAQ — Fire-Rated Drywall Casselman

Fire-Rated Drywall Casselman: your questions answered

Where is fire-rated drywall required?: The standard Casselman fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Casselman project needs.
Can you finish the fire-rated board too?: Yes — the Casselman assembly meets code and leaves paint-ready — compliant and good-looking.
Can you finish the fire-rated board too?: Yes — code-met and clean-finished: the Casselman rated assembly comes out paint-ready.
Do you stand behind your fire-rated work in Casselman?: Yes. We install to code and walk the Casselman job with you, and if something is not right we come back and make it right.
Will it pass inspection in Casselman?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Casselman separation passes inspection.
Do you install fire-rated drywall in Casselman?: Yes — fire-rated drywall in Casselman is part of our regular work, and we are usually booked within the week. We also cover Balwin, Bannerman, Belmont and Northeast.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Casselman

Fire-rated drywall in Casselman, installed to code