Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Fire-rated drywall in Cameron Heights, installed to code

In Cameron Heights the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Cameron Heights we install fire-rated drywall to code and finish it clean. Cameron Heights is this established West Edmonton community where reno, repair and ceiling drywall are common, so fire-rated work here is common on garages and suites. We cover Cameron Heights, Aldergrove, Belmead, Callingwood North and West Edmonton, 7 days a week.

Fire-Rated Drywall Cameron Heights

Watch fire-rated drywall jobs in Cameron Heights on our YouTube channel

Fire-rated garages, suites and party walls in Cameron Heights

Garage firewalls

The most common fire-rated job in Cameron Heights is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Cameron Heights homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

Cameron Heights drywall in context

About Cameron Heights

Cameron Heights was named after John Cameron, a pioneer and businessman who lived at the north end of the road that now bears his name (Cameron Avenue).

What we see in Cameron Heights

In Cameron Heights the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

What affects the cost of fire-rated drywall in Cameron Heights?

Area and assembly

The cost in Cameron Heights depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. In Cameron Heights, the required rating sets the assembly build-up — and Type X runs above standard board on cost. We price off the spec and a site look.

Passing inspection in Cameron Heights

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Cameron Heights project passes the first time.

Our Cameron Heights fire-rated drywall process, step by step

Right board, right build-up

In Cameron Heights we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Cameron Heights separation the inspector approves and the eye approves too.

Why Cameron Heights homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Cameron Heights we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Cameron Heights and West Edmonton, 7 days a week. You get the Cameron Heights number before we start, a tidy site and work we stand behind. Any issue on an Cameron Heights job earns a return trip and a proper fix.

What affects the cost of fire-rated drywall in Cameron Heights?

Area and assembly

The cost in Cameron Heights depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Cameron Heights rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Cameron Heights

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Cameron Heights project passes the first time.

Fire-rated garages, suites and party walls in Cameron Heights

Garage firewalls

The most common fire-rated job in Cameron Heights is the garage-to-house separation — Type X board on the common wall and ceiling. To-code install and finish.

Party walls and legal suites

Both are regular calls across Cameron Heights. We build the rated separations these require. See our legal suite drywall page.

Simple, clean, on schedule — Fire-Rated Drywall in Cameron Heights

1

Free quote

We come out to your Cameron Heights property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Cameron Heights starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Cameron Heights. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Cameron Heights home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Cameron Heights. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

Emplastrum Drywall is the fire-rated drywall contractor Cameron Heights trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Cameron Heights.

Read our reviews on Google

Fire-Rated Drywall Cameron Heights: your questions answered

Do you install fire-rated drywall in Cameron Heights?
Yes — fire-rated drywall in Cameron Heights is part of our regular work, and we are usually booked within the week. We also cover Aldergrove, Belmead, Callingwood North and West Edmonton.
Where is fire-rated drywall required?
In Cameron Heights, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Cameron Heights project needs.
Where is fire-rated drywall required?
Garage separations, legal suites and party walls are where Cameron Heights homes typically need rated Type X assemblies. We confirm what your Cameron Heights project needs.
Can you finish the fire-rated board too?
Yes — your Cameron Heights separation passes code and looks properly finished, ready for paint.
Where is fire-rated drywall required?
The standard Cameron Heights fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Cameron Heights project needs.
Can you finish the fire-rated board too?
Yes — the Cameron Heights assembly meets code and leaves paint-ready — compliant and good-looking.
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook