Where is fire-rated drywall required?

The standard Boyle Street fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Boyle Street project needs.

Can you finish the fire-rated board too?

Yes — the Boyle Street assembly meets code and leaves paint-ready — compliant and good-looking.

Can you finish the fire-rated board too?

Yes — code-met and clean-finished: the Boyle Street rated assembly comes out paint-ready.

Do you stand behind your fire-rated work in Boyle Street?

Yes. We install to code and walk the Boyle Street job with you, and if something is not right we come back and make it right.

Will it pass inspection in Boyle Street?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Boyle Street separation passes inspection.

Do you install fire-rated drywall in Boyle Street?

Yes — fire-rated drywall in Boyle Street is part of our regular work, and we are usually booked within the week. We also cover Central McDougall, Dovercourt, Downtown and Central.

Fire-Rated Drywall Boyle Street | Fire-Rated Drywall

Fire-rated drywall in Boyle Street, installed to code

In Boyle Street the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Boyle Street we install fire-rated drywall to code and finish it clean. Boyle Street is this established Central community where reno, repair and ceiling drywall are common, so fire-rated work here is common on garages and suites. We cover Boyle Street, Central McDougall, Dovercourt, Downtown and Central, 7 days a week.

Garage-to-house firewall separations
Type X fire-rated board to code in Boyle Street
Finished clean and inspection-ready
Boyle Street coverage — we come to you
Rated assemblies installed and sealed correctly
Party walls between units
Basement legal-suite fire separations

Our Boyle Street fire-rated drywall process, step by step

Right board, right build-up

In Boyle Street we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. The Boyle Street deliverable: a separation that passes inspection, meets code and looks complete.

Boyle Street drywall in context

About Boyle Street

The hub of Edmonton's early commercial district, Boyle Street was recorded on a map of the newly created town of Edmonton in 1892.

What we see in Boyle Street

In Boyle Street the drywall work is verify dominant band before writing notes. We confirm what your home actually needs on site, in writing, before anything starts.

Fire-rated garages, suites and party walls in Boyle Street

Garage firewalls

The most common fire-rated job in Boyle Street is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Boyle Street homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

What affects the cost of fire-rated drywall in Boyle Street?

Area and assembly

The cost in Boyle Street depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. In Boyle Street, the required rating sets the assembly build-up — and Type X runs above standard board on cost. We price off the spec and a site look.

Passing inspection in Boyle Street

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Boyle Street project passes the first time.

Our Boyle Street fire-rated drywall process, step by step

Right board, right build-up

In Boyle Street we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Boyle Street separation the inspector approves and the eye approves too.

Why Boyle Street homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Boyle Street we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Boyle Street and Central, 7 days a week. You get the Boyle Street number before we start, a tidy site and work we stand behind. Any issue on an Boyle Street job earns a return trip and a proper fix.

What affects the cost of fire-rated drywall in Boyle Street?

Area and assembly

The cost in Boyle Street depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Boyle Street rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Boyle Street

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Boyle Street

Free quote

We come out to your Boyle Street property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Boyle Street starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Boyle Street. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Boyle Street home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Boyle Street. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Boyle Street trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Boyle Street.

Read our reviews on Google

FAQ — Fire-Rated Drywall Boyle Street

Fire-Rated Drywall Boyle Street: your questions answered

Where is fire-rated drywall required?: The standard Boyle Street fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Boyle Street project needs.
Can you finish the fire-rated board too?: Yes — the Boyle Street assembly meets code and leaves paint-ready — compliant and good-looking.
Can you finish the fire-rated board too?: Yes — code-met and clean-finished: the Boyle Street rated assembly comes out paint-ready.
Do you stand behind your fire-rated work in Boyle Street?: Yes. We install to code and walk the Boyle Street job with you, and if something is not right we come back and make it right.
Will it pass inspection in Boyle Street?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Boyle Street separation passes inspection.
Do you install fire-rated drywall in Boyle Street?: Yes — fire-rated drywall in Boyle Street is part of our regular work, and we are usually booked within the week. We also cover Central McDougall, Dovercourt, Downtown and Central.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Boyle Street

Fire-rated drywall in Boyle Street, installed to code