Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Fire-rated drywall in Athlone, installed to code

No shortcuts on Athlone fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Athlone we install fire-rated drywall to code and finish it clean. Athlone is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so fire-rated work here is common on garages and suites. We cover Athlone, Albany, Baranow, Baturyn and Northwest, 7 days a week.

Fire-Rated Drywall Athlone

Watch fire-rated drywall jobs in Athlone on our YouTube channel

What affects the cost of fire-rated drywall in Athlone?

Area and assembly

The cost in Athlone depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. Expect Type X to price above regular board; the Athlone assembly build follows the rating. We price off the spec and a site look.

Passing inspection in Athlone

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Athlone project passes the first time.

Athlone drywall in context

About Athlone

Named in honour of the Earl of Athlone, Canada's Governor-General from 1940-46, Athlone is located north of the Canadian National Rail line.

What we see in Athlone

In Athlone the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Why Athlone homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Athlone we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Athlone and Northwest, 7 days a week. The Athlone quote is free and the price fixed — clean site, backed workmanship. Not right in Athlone? We come back and correct it.

Why Athlone homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Athlone we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Athlone and Northwest, 7 days a week. Fixed pricing on free Athlone quotes, a clean site and a guarantee on the work. When an Athlone job is not right, we make it right — on us.

Fire-rated garages, suites and party walls in Athlone

Garage firewalls

The most common fire-rated job in Athlone is the garage-to-house separation — Type X board on the common wall and ceiling. Installed and finished to code.

Suites and party walls

Athlone sees steady legal-suite and party-wall work. We build the rated separations these require. See our legal suite drywall page.

Common fire-rated situations in Athlone

Finished garages and new builds

Fire-rated work here is common when garages are finished and on new builds and additions where the separations are part of the spec.

Suite conversions

When an Athlone basement is converted to a legal suite, the fire separation between the suite and the main floor is a code requirement we handle as part of the drywall.

Our Athlone fire-rated drywall process, step by step

Right board, right build-up

In Athlone we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. The Athlone deliverable: a separation that passes inspection, meets code and looks complete.

Simple, clean, on schedule — Fire-Rated Drywall in Athlone

1

Free quote

We come out to your Athlone property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Athlone starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Athlone. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Athlone home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Athlone. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

Emplastrum Drywall is the fire-rated drywall contractor Athlone trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Athlone.

Read our reviews on Google

Fire-Rated Drywall Athlone: your questions answered

Do you install fire-rated drywall in Athlone?
Yes — fire-rated drywall in Athlone is part of our regular work, and we are usually booked within the week. We also cover Albany, Baranow, Baturyn and Northwest.
Where is fire-rated drywall required?
In Athlone, the usual Type X candidates are garage separations, legal suites and unit-dividing party walls. We confirm what your Athlone project needs.
Where is fire-rated drywall required?
Garage separations, legal suites and party walls are where Athlone homes typically need rated Type X assemblies. We confirm what your Athlone project needs.
Can you finish the fire-rated board too?
Yes — your Athlone separation passes code and looks properly finished, ready for paint.
Where is fire-rated drywall required?
The standard Athlone fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Athlone project needs.
Can you finish the fire-rated board too?
Yes — the Athlone assembly meets code and leaves paint-ready — compliant and good-looking.
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook