Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Walker. Wall board under ceiling board helps hold the Walker ceiling. Flip the Walker sequence and the ceiling joints go unsupported — cracks follow. The Walker ceiling finishes before any wall boarding starts.

Do you cover all of Edmonton for drywall installation?

Yes — we cover all four Edmonton quadrants, Edmonton, Charlesworth, Decoteau, Ellerslie, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.

How long does drywall installation take in a Walker home?

A standard basement in a Walker home typically takes one to two days to board. New construction or a big reno in Walker runs a longer schedule. The Walker timeline you get at the quote is realistic, not optimistic. In Walker, finishing usually begins the day after boarding wraps.

Do you stand behind your installation work in Walker?

Yes. Before leaving Walker, we walk the boarding together and fix anything not right.

Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Walker. In Walker, the wall board tucks under the ceiling board to support it. Out of order, Walker ceiling joints carry their own weight and crack sooner. In Walker, walls wait until the ceiling is boarded.

What board do you use for exterior basement walls in Walker?

Moisture-resistant board on all Walker exterior foundation walls and around plumbing and laundry. Standard 1/2” board for Walker interior walls away from moisture. For Walker legal suites: 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify the right product for each Walker surface at the on-site quote.

Drywall Installation Walker | New Board

Drywall installation in Walker — hung straight, screwed off right

Good drywall installation is what makes a good Walker finish possible — seams on framing, the right screw pattern, board plumb before a single coat of mud goes on. In Walker we board new builds, basements and renovations the way a finishing specialist wants it boarded. Walker is an older Ellerslie community where settling cracks, aging texture and the occasional plaster repair come up, so the installation work here is usually settling cracks, aging stipple and the odd plaster repair. We cover Walker, Charlesworth, Decoteau, Ellerslie and Ellerslie, 7 days a week.

Basement development boarding in Walker — ceiling first, then walls
Exterior and wet-area Walker walls boarded moisture-resistant
Drywall boarding and hanging — new builds and renovations
Walker screw spacing to spec, seams landed on framing
Renovation reboarding — removing old board, installing new to current spec
Walker board hung on the correct screw pattern, seams on framing
Ready for taping when we leave an Walker job — no rework

Our Walker drywall installation process, step by step

Ceiling board first, always

Every boarding job in Walker starts with the ceiling, because the wall board butts up under it and helps carry it. In Walker, reversing the order under-supports the joints.

Wall board and seams

Walls go up with correct screws and framed seams. In Walker, completed boarding hands straight to taping with nothing to fix.

Types of Drywall Installation work in Walker

New installs, renovation work and repair in Walker

We handle the full range of drywall installation work in Walker — from brand-new basement boarding and taping to single-room renovation patches and targeted repair work. Every job gets the same Level 4 standard and fixed price commitment.

Legal suites and multi-use spaces in Walker

Legal suite work in Walker requires specific board specs: fire-rated on the suite ceiling, soundproof on party walls, moisture-resistant in wet areas. We confirm the spec before we start and board to it.

Drywall installation work we do in Walker

New development boarding in Walker — basement and flex rooms

Walker homeowners finishing new development basements call us to do the boarding before the taping crew. We hang ceiling board first, wall board second, with moisture-resistant on exterior foundation walls and any wall adjacent to plumbing rough-in. We cut bulkheads cleanly, use the correct screw pattern throughout and leave the space ready for taping. No re-work — the taper can start the day after we finish.

Legal suite boarding to spec in Walker

With strong rental demand in the Walker area, secondary suite boarding calls are among the most consistent installation jobs we do. We board to the Edmonton spec — 5/8” Type X fire-rated on the suite ceiling, STC soundproof on party walls, moisture-resistant in wet areas — and leave an inspection-ready installation. Fixed price, specified at the on-site quote.

What affects the cost of drywall installation in Walker?

Square footage, board type and ceiling complexity in Walker

The cost of drywall installation in Walker comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaulted ceilings, bulkheads and soffits add time), and whether the job is a new development or a renovation around existing Walker trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec for Walker homes — right product on every surface

Not every surface in an Walker home needs the same board. Exterior foundation walls need moisture-resistant. Walker bathrooms and laundry need moisture-resistant board on all walls. Walker legal-suite ceilings need 5/8” Type X fire-rated. Walker party walls between a suite and living space benefit from STC soundproof board. Standard 1/2” board is correct for Walker interior walls away from moisture. We specify the right product for each Walker surface at the on-site quote — not after the inspector flags it.

Our drywall installation process in Walker, step by step

Ceiling board first — always — in Walker homes

Every boarding job in Walker starts with the ceiling. Ceilings before walls in Walker: the walls butt under the ceiling board and hold it. Miss the Walker sequence and unsupported ceiling joints crack over time. The Walker ceiling finishes before any wall boarding starts. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Walker

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. No Walker seam falls between studs; all land on framing. Walker corners, inside and outside, come out square and clean. Board never runs past the openings on Walker jobs. When the boarding is done in an Walker home, every surface is at the right plane and the taping crew can go straight to work.

Drywall board types used in Walker homes

Standard 1/2” drywall — the right choice for most Walker walls

Standard 1/2” drywall is correct for interior walls and ceilings in Walker homes away from moisture exposure. It is the most common board we install, finishes the same as the rest of the house and is what most Walker walls and ceilings should be. Most interior walls and ceilings in Walker homes use standard 1/2” board.

Moisture-resistant, fire-rated and soundproof — where spec matters in Walker

Exterior basement walls in Walker homes need moisture-resistant board. Moisture-resistant board on all Walker bathroom and laundry walls. Code puts 5/8” Type X fire-rated board on Walker suite ceilings. STC soundproof board goes on Walker suite party walls. Every Walker surface has its product confirmed at the quote, no inspection surprises.

How it works

Simple, clean, on schedule — Drywall Installation in Walker

Free quote

We come out to your Walker property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Walker starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Walker. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Walker home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Walker. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Walker trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Walker.

Read our reviews on Google

FAQ — Drywall Installation Walker

Drywall Installation Walker: your questions answered

Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Walker. Wall board under ceiling board helps hold the Walker ceiling. Flip the Walker sequence and the ceiling joints go unsupported — cracks follow. The Walker ceiling finishes before any wall boarding starts.
Do you cover all of Edmonton for drywall installation?: Yes — we cover all four Edmonton quadrants, Edmonton, Charlesworth, Decoteau, Ellerslie, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.
How long does drywall installation take in a Walker home?: A standard basement in a Walker home typically takes one to two days to board. New construction or a big reno in Walker runs a longer schedule. The Walker timeline you get at the quote is realistic, not optimistic. In Walker, finishing usually begins the day after boarding wraps.
Do you stand behind your installation work in Walker?: Yes. Before leaving Walker, we walk the boarding together and fix anything not right.
Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Walker. In Walker, the wall board tucks under the ceiling board to support it. Out of order, Walker ceiling joints carry their own weight and crack sooner. In Walker, walls wait until the ceiling is boarded.
What board do you use for exterior basement walls in Walker?: Moisture-resistant board on all Walker exterior foundation walls and around plumbing and laundry. Standard 1/2” board for Walker interior walls away from moisture. For Walker legal suites: 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify the right product for each Walker surface at the on-site quote.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Walker

Drywall installation in Walker — hung straight, screwed off right