What board do you use for exterior basement walls in Tamarack?

Moisture-resistant board on all Tamarack exterior foundation walls and around plumbing and laundry. Standard 1/2” board for Tamarack interior walls away from moisture. For Tamarack legal suites: 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify the right product for each Tamarack surface at the on-site quote.

Do you board for legal suites in Tamarack?

Yes, and we know the spec. A legal secondary suite in Tamarack requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. The Tamarack suite is boarded to that spec, and inspection follows.

Do you hang the ceiling board before the walls?

Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.

How long does drywall installation take in a Tamarack home?

A standard basement in a Tamarack home typically takes one to two days to board. In Tamarack, a full new build or major renovation stretches the timeline. Honest scheduling in Tamarack: the quoted timeline is the real one. Taping typically starts next-day on Tamarack jobs.

Is drywall installation in Tamarack a fixed price?

Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.

Do you board for legal suites in Tamarack?

Yes, and we know the spec. A legal secondary suite in Tamarack requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Tamarack suites board and pass inspection.

Drywall Installation Tamarack | New Board

Drywall installation in Tamarack, hung straight and screwed off right

In Tamarack, the install sets up the finish. Level hanging, right screws, framed seams and clean mechanical/corner cuts — the Tamarack standard. Tamarack homes from the 2000s and 2010s were built with framed, unfinished basements. Full basement boarding is the most common installation call here. We cover Tamarack, Bisset, Crawford Plains, Daly Grove and the surrounding area, 7 days a week.

No rework in Tamarack: tape-ready boarding when we go
Left ready for taper — no rework needed
Tamarack boarding left tape-ready, no rework for the finishers
Tamarack basements boarded in order: ceiling, then walls
No rework in Tamarack — the board is ready for tape when we go
Fire-rated plus soundproof board on Tamarack suite separations
STC soundproof board on party walls for legal suites

Drywall board types used in Tamarack homes

Standard 1/2” drywall — the right choice for most Tamarack walls

Standard 1/2” drywall is correct for interior walls and ceilings in Tamarack homes away from moisture exposure. It is the most common board we install, finishes the same as the rest of the house and is what most Tamarack walls and ceilings should be. Most interior walls and ceilings in Tamarack homes use standard 1/2” board.

Moisture-resistant, fire-rated and soundproof — where spec matters in Tamarack

Exterior basement walls in Tamarack homes need moisture-resistant board. Moisture-resistant board on all Tamarack bathroom and laundry walls. Code puts 5/8” Type X fire-rated board on Tamarack suite ceilings. STC soundproof board goes on Tamarack suite party walls. Every Tamarack surface has its product confirmed at the quote, no inspection surprises.

Drywall installation work we do across Edmonton

Basement development boarding in Edmonton — new builds and existing homes

The most common boarding call across Edmonton is full basement development. In newer Edmonton communities — Bisset, Crawford Plains, Daly Grove — the builder framed the basement and the homeowner is ready to develop it. We board ceiling first, then the walls, with moisture-resistant on every exterior foundation wall. In older Edmonton communities — Bisset, Crawford Plains, Daly Grove — the call is often a legal suite conversion with fire-rated and soundproof board to spec.

Renovation boarding and room additions in established Edmonton communities

Established Edmonton homeowners renovating their main floors call us for boarding after walls come down. Kitchen open-ups, room additions, bathroom relocations — all require new board hung to match the adjacent surfaces. We assess the framing, select the right board thickness, hang level and leave the newly boarded walls ready for taping. No visible seam between old and new.

Our drywall installation process in Tamarack, step by step

Ceiling board first — always — in Tamarack homes

Every boarding job in Tamarack starts with the ceiling. In Tamarack we board ceilings first — the wall board tucks under and helps carry the ceiling. Skip the Tamarack order and the ceiling joints go unsupported and crack. In Tamarack, walls wait until the ceiling is boarded. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Tamarack

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. In Tamarack, every seam lands on framing, never mid-bay. In Tamarack, every inside and outside corner is square and clean. In Tamarack, board stops clean at window and door frames. When the boarding is done in a Tamarack home, every surface is at the right plane and the taping crew can go straight to work.

What affects the cost of drywall installation in Tamarack?

Square footage, board type and ceiling complexity

The cost of drywall installation in Tamarack comes down to the total square footage, the board type (standard, moisture-resistant, fire-rated and soundproof price differently), and whether the job is a new development or a renovation around existing trades. We measure on site and give a fixed price before we start.

Board spec in Tamarack

The work here usually calls for settling cracks, nail pops and tired texture. The Tamarack quote maps each surface to its correct board — no inspection surprises.

Our Drywall Installation process in Tamarack

Assess before we start — always in Tamarack

Every job in Tamarack starts with an on-site assessment. We do not guess at scope, board type or texture match. We confirm what is needed, give you a fixed price and only then start the work.

Left clean and paint-ready in Tamarack

When we leave your Tamarack home, the work is done properly — Level 4 tape on every joint, texture matched, surface sanded flat and ready for the painter. No rework from the painter. No callbacks.

Drywall board types used in Tamarack homes

Standard 1/2” drywall — the right choice for most Tamarack walls

Moisture-resistant, fire-rated and soundproof — where spec matters in Tamarack

Exterior basement walls in Tamarack homes need moisture-resistant board. In Tamarack, every bathroom and laundry wall takes moisture-resistant board. An Tamarack suite ceiling must carry 5/8” Type X fire-rated board. In Tamarack, the suite-to-main party wall takes STC soundproof board. The right board per Tamarack surface is set at the quote for a clean inspection.

How it works

Simple, clean, on schedule — Drywall Installation in Tamarack

Free quote

We come out to your Tamarack property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Tamarack starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Tamarack. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Tamarack home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Tamarack. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Tamarack trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Tamarack.

Read our reviews on Google

FAQ — Drywall Installation Tamarack

Drywall Installation Tamarack: your questions answered

What board do you use for exterior basement walls in Tamarack?: Moisture-resistant board on all Tamarack exterior foundation walls and around plumbing and laundry. Standard 1/2” board for Tamarack interior walls away from moisture. For Tamarack legal suites: 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify the right product for each Tamarack surface at the on-site quote.
Do you board for legal suites in Tamarack?: Yes, and we know the spec. A legal secondary suite in Tamarack requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. The Tamarack suite is boarded to that spec, and inspection follows.
Do you hang the ceiling board before the walls?: Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.
How long does drywall installation take in a Tamarack home?: A standard basement in a Tamarack home typically takes one to two days to board. In Tamarack, a full new build or major renovation stretches the timeline. Honest scheduling in Tamarack: the quoted timeline is the real one. Taping typically starts next-day on Tamarack jobs.
Is drywall installation in Tamarack a fixed price?: Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.
Do you board for legal suites in Tamarack?: Yes, and we know the spec. A legal secondary suite in Tamarack requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Tamarack suites board and pass inspection.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Tamarack

Drywall installation in Tamarack, hung straight and screwed off right