Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Strathcona. Wall board under ceiling board helps hold the Strathcona ceiling. Flip the Strathcona sequence and the ceiling joints go unsupported — cracks follow. The Strathcona ceiling finishes before any wall boarding starts.

Do you cover all of Edmonton for drywall installation?

Yes — we cover all four Edmonton quadrants, Edmonton, Allendale, Argyll, Belgravia, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.

How long does drywall installation take in a Strathcona home?

A standard basement in a Strathcona home typically takes one to two days to board. New construction or a big reno in Strathcona runs a longer schedule. The Strathcona timeline you get at the quote is realistic, not optimistic. In Strathcona, finishing usually begins the day after boarding wraps.

Do you stand behind your installation work in Strathcona?

Yes. Before leaving Strathcona, we walk the boarding together and fix anything not right.

Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Strathcona. In Strathcona, the wall board tucks under the ceiling board to support it. Out of order, Strathcona ceiling joints carry their own weight and crack sooner. In Strathcona, walls wait until the ceiling is boarded.

What board do you use for exterior basement walls in Strathcona?

Moisture-resistant board on all Strathcona exterior foundation walls and around plumbing and laundry. Standard 1/2” board for Strathcona interior walls away from moisture. For Strathcona legal suites: 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify the right product for each Strathcona surface at the on-site quote.

Drywall Installation Strathcona | New Board

Drywall installation in Strathcona — hung straight, screwed off right

A good Strathcona finish starts with good boarding. In Strathcona the board goes up level, correctly screwed, seams on framing, clean cuts at mechanical and corners. Strathcona is one of Scona’s newest communities — most homes have framed, unfinished basements ready for boarding. We cover Strathcona, Allendale, Argyll, Belgravia and the surrounding area, 7 days a week.

Tape-ready Strathcona boarding, nothing for the taping crew to fix
Drywall boarding and hanging in Strathcona — new builds and renovations
Basement boarding — ceiling first, walls second
Drywall boarding in Strathcona — new builds and renovations
Basement development boarding in Strathcona — ceiling first, then walls
Exterior and wet-area Strathcona walls boarded moisture-resistant
Drywall boarding and hanging — new builds and renovations

Why Strathcona homeowners trust Emplastrum for drywall installation

Board it right for the finish

Behind every Strathcona taping problem we have fixed was a boarding problem first. We board every Strathcona job the way we would want it boarded before we tape it.

Fixed price, same-day reply

We install drywall across Strathcona and Scona, 7 days a week. For Strathcona homeowners: free quote, fixed number, backed workmanship. Any issue on an Strathcona boarding job earns a return trip and a proper fix.

Strathcona drywall in context

About Strathcona

Strathcona was named for Lord Strathcona, Hudson Bay Company Governor (1889-1914) and the man chosen to drive the "last spike" of the CPR transcontinental railway.

What we see in Strathcona

In Strathcona the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

What affects the cost of drywall installation in Strathcona?

Square footage, board type and ceiling complexity in Strathcona

The cost of drywall installation in Strathcona comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaults, bulkheads and soffits add time), and new development vs renovation around the existing Strathcona trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec for Strathcona homes — right product on every surface

Not every surface in an Strathcona home needs the same board. Exterior foundation walls need moisture-resistant. In Strathcona, every bathroom and laundry wall takes moisture-resistant board. An Strathcona suite ceiling requires 5/8” Type X fire-rated board. In Strathcona, suite-to-living party walls do better with STC soundproof board. For dry Strathcona interior walls, standard 1/2” board is right. In Strathcona, the correct board per surface is set at the quote, not after inspection.

Our Strathcona drywall installation process, step by step

Ceiling board first, always

Every boarding job in Strathcona starts with the ceiling, because the wall board butts up under it and helps carry it. Reversing the sequence leaves Strathcona ceiling joints unsupported and more likely to crack later.

Wall boarding, screw pattern and seams

Wall board goes up with the correct screw pattern and every seam lands on framing. When the Strathcona boarding is done, the taping crew can start immediately with no rework.

Drywall installation work we do in Strathcona

Room addition and partition boarding in Strathcona homes

Strathcona homes from the late 1980s and 1990s are at the age where homeowners are adding partitions, converting rooms and opening up floor plans. New walls go up and existing rooms get reboarded when layouts change. We hang standard 1/2” board on all new partition walls, confirm the framing is square before we start and leave the new walls ready for the taping crew. Board seams land on studs, corners are clean and nothing is proud of the adjacent surface.

Water damage reboarding in Strathcona

Water damage in Strathcona homes from the late 1980s and 1990s is one of the most common boarding calls we get. A bathroom leak, a roof problem or a burst pipe means the affected board comes out and new board goes up on the exposed framing. We assess what needs to come down, remove only what is damaged, re-board to match the existing surface height and leave the wall ready for taping.

Why Strathcona homeowners trust Emplastrum for drywall installation

Boarding done right means the finish can be done right in Strathcona

The quality of a Level 4 wall finish starts with the boarding behind it. Poorly hung Strathcona board — not level, seams mid-bay, screws too far — fights the finish. We board every Strathcona job the way a taping specialist would want it boarded — because we are the taping specialist. When we finish the boarding, we can finish the taping to Level 4 without fighting the installation underneath.

Fixed price, same-day reply, all four Edmonton quadrants, Edmonton, Allendale, Argyll, Belgravia and Edmonton

We cover all four Edmonton quadrants, Edmonton, Allendale, Argyll, Belgravia and Edmonton, 7 days a week — Strathcona, Allendale, Argyll, Belgravia and every community in between. Fixed Strathcona pricing means the pre-start figure survives arrival.

What affects the cost of drywall installation in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Strathcona bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Strathcona, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

How it works

Simple, clean, on schedule — Drywall Installation in Strathcona

Free quote

We come out to your Strathcona property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Strathcona starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Strathcona. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Strathcona home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Strathcona. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Strathcona trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Strathcona.

Read our reviews on Google

FAQ — Drywall Installation Strathcona

Drywall Installation Strathcona: your questions answered

Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Strathcona. Wall board under ceiling board helps hold the Strathcona ceiling. Flip the Strathcona sequence and the ceiling joints go unsupported — cracks follow. The Strathcona ceiling finishes before any wall boarding starts.
Do you cover all of Edmonton for drywall installation?: Yes — we cover all four Edmonton quadrants, Edmonton, Allendale, Argyll, Belgravia, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.
How long does drywall installation take in a Strathcona home?: A standard basement in a Strathcona home typically takes one to two days to board. New construction or a big reno in Strathcona runs a longer schedule. The Strathcona timeline you get at the quote is realistic, not optimistic. In Strathcona, finishing usually begins the day after boarding wraps.
Do you stand behind your installation work in Strathcona?: Yes. Before leaving Strathcona, we walk the boarding together and fix anything not right.
Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Strathcona. In Strathcona, the wall board tucks under the ceiling board to support it. Out of order, Strathcona ceiling joints carry their own weight and crack sooner. In Strathcona, walls wait until the ceiling is boarded.
What board do you use for exterior basement walls in Strathcona?: Moisture-resistant board on all Strathcona exterior foundation walls and around plumbing and laundry. Standard 1/2” board for Strathcona interior walls away from moisture. For Strathcona legal suites: 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify the right product for each Strathcona surface at the on-site quote.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Strathcona

Drywall installation in Strathcona &mdash; hung straight, screwed off right