What board do you use for exterior basement walls in Queen Alexandra?

Moisture-resistant board on all Queen Alexandra exterior foundation walls and around plumbing and laundry. Standard 1/2” board for Queen Alexandra interior walls away from moisture. For Queen Alexandra legal suites: 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify the right product for each Queen Alexandra surface at the on-site quote.

Do you board for legal suites in Queen Alexandra?

Yes, and we know the spec. A legal secondary suite in Queen Alexandra requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. The Queen Alexandra suite is boarded to that spec, and inspection follows.

Do you hang the ceiling board before the walls?

Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.

How long does drywall installation take in a Queen Alexandra home?

A standard basement in a Queen Alexandra home typically takes one to two days to board. In Queen Alexandra, a full new build or major renovation stretches the timeline. Honest scheduling in Queen Alexandra: the quoted timeline is the real one. Taping typically starts next-day on Queen Alexandra jobs.

Is drywall installation in Queen Alexandra a fixed price?

Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.

Do you board for legal suites in Queen Alexandra?

Yes, and we know the spec. A legal secondary suite in Queen Alexandra requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Queen Alexandra suites board and pass inspection.

Drywall Installation Queen Alexandra | New Board

Drywall installation in Queen Alexandra — right board, right spec, ready to tape

A good Queen Alexandra finish starts with good boarding. In Queen Alexandra the board goes up level, correctly screwed, seams on framing, clean cuts at mechanical and corners. Queen Alexandra is one of Scona’s newest communities — most homes have framed, unfinished basements ready for boarding. We cover Queen Alexandra, Allendale, Argyll, Belgravia and the surrounding area, 7 days a week.

STC soundproof board on party walls for legal suites
Queen Alexandra legal-suite separations get fire-rated and soundproof board
Correct screw pattern throughout Queen Alexandra — all seams on framing
Tape-ready Queen Alexandra boarding, nothing for the taping crew to fix
Drywall boarding and hanging in Queen Alexandra — new builds and renovations
Basement boarding — ceiling first, walls second
Drywall boarding in Queen Alexandra — new builds and renovations

What affects the cost of drywall installation in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Queen Alexandra wet rooms — bath and laundry — get moisture board throughout. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. Standard 1/2” suits Queen Alexandra interior walls clear of moisture. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

Why Queen Alexandra homeowners trust Emplastrum for drywall installation

Boarding done right means the finish can be done right in Queen Alexandra

The quality of a Level 4 wall finish starts with the boarding behind it. Un-level Queen Alexandra board, mid-field seams or wide screw spacing all make trouble for the finishers. We board every Queen Alexandra job the way a taping specialist would want it boarded — because we are the taping specialist. When we finish the boarding, we can finish the taping to Level 4 without fighting the installation underneath.

Fixed price, same-day reply, all four Edmonton quadrants, Edmonton, Allendale, Argyll, Belgravia and Edmonton

We cover all four Edmonton quadrants, Edmonton, Allendale, Argyll, Belgravia and Edmonton, 7 days a week — Queen Alexandra, East Hills, Applewood, Edmonton, Allendale, Argyll, Belgravia and Penbrooke and every community in between. Your Queen Alexandra quote is free and the price fixed — it holds when we arrive.

Drywall board types for Queen Alexandra homes

Standard board for most walls

Standard 1/2-inch drywall is correct for most interior walls and ceilings in Queen Alexandra away from moisture exposure.

Moisture-resistant, fire-rated and soundproof where the spec matters

Exterior basement walls and wet areas need moisture-resistant board; legal suite ceilings need fire-rated board; party walls need soundproof board. We specify the right product for every Queen Alexandra surface before we pull the first sheet.

Drywall Installation work we do in Queen Alexandra

Renovation boarding in 1960s and 1970s Queen Alexandra homes

The most common drywall installation call from Queen Alexandra is renovation work. Walls come down for a kitchen open-up, a bathroom move or a structural change, and new board goes up on the exposed framing. Queen Alexandra homes from this era often have original plaster or early drywall that does not match modern board thickness — we assess the framing and select the right board thickness so the surface is consistent.

Bathroom and wet-area boarding in Queen Alexandra — moisture-resistant board

Bathroom renovations in Queen Alexandra homes require moisture-resistant board behind tile and around any plumbing chase. We hang moisture-resistant board properly so the tile substrate is solid and the installation holds for the long term.

Why Queen Alexandra homeowners trust Emplastrum for drywall installation

Boarding done right means the finish can be done right in Queen Alexandra

Fixed price, same-day reply, all four Edmonton quadrants, Edmonton, Allendale, Argyll, Belgravia and Edmonton

We cover all four Edmonton quadrants, Edmonton, Allendale, Argyll, Belgravia and Edmonton, 7 days a week — Queen Alexandra, Allendale, Argyll, Belgravia and every community in between. Your Queen Alexandra quote is free and the price fixed — it holds when we arrive.

Our drywall installation process in Queen Alexandra, step by step

Ceiling board first — always — in Queen Alexandra homes

Every boarding job in Queen Alexandra starts with the ceiling. Ceiling board goes up before the walls in Queen Alexandra because the wall board butts up under the ceiling board and helps support it. Skipping that sequence means the Queen Alexandra ceiling joints carry their own weight unsupported and are more likely to crack. We do not start Queen Alexandra walls until the ceiling is done. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Queen Alexandra

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. All Queen Alexandra seams land on framing, not between studs. Inside and outside Queen Alexandra corners are clean and square. Queen Alexandra board does not run past window and door frames. When the boarding is done in an Queen Alexandra home, every surface is at the right plane and the taping crew can go straight to work.

How it works

Simple, clean, on schedule — Drywall Installation in Queen Alexandra

Free quote

We come out to your Queen Alexandra property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Queen Alexandra starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Queen Alexandra. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Queen Alexandra home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Queen Alexandra. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Queen Alexandra trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Queen Alexandra.

Read our reviews on Google

FAQ — Drywall Installation Queen Alexandra

Drywall Installation Queen Alexandra: your questions answered

What board do you use for exterior basement walls in Queen Alexandra?: Moisture-resistant board on all Queen Alexandra exterior foundation walls and around plumbing and laundry. Standard 1/2” board for Queen Alexandra interior walls away from moisture. For Queen Alexandra legal suites: 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify the right product for each Queen Alexandra surface at the on-site quote.
Do you board for legal suites in Queen Alexandra?: Yes, and we know the spec. A legal secondary suite in Queen Alexandra requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. The Queen Alexandra suite is boarded to that spec, and inspection follows.
Do you hang the ceiling board before the walls?: Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.
How long does drywall installation take in a Queen Alexandra home?: A standard basement in a Queen Alexandra home typically takes one to two days to board. In Queen Alexandra, a full new build or major renovation stretches the timeline. Honest scheduling in Queen Alexandra: the quoted timeline is the real one. Taping typically starts next-day on Queen Alexandra jobs.
Is drywall installation in Queen Alexandra a fixed price?: Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.
Do you board for legal suites in Queen Alexandra?: Yes, and we know the spec. A legal secondary suite in Queen Alexandra requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Queen Alexandra suites board and pass inspection.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Queen Alexandra

Drywall installation in Queen Alexandra — right board, right spec, ready to tape