How long does drywall installation take in a Edmonton home?

A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. At the Ormsby Place quote you get the true install timeline. The taping crew can usually start the next day.

Does Ormsby Place taping follow straight after boarding?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Ormsby Place.

What board do you use for exterior basement walls in Ormsby Place?

Every Ormsby Place foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Ormsby Place interior walls away from moisture take standard 1/2” board. Ormsby Place suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Ormsby Place surface is set at the on-site quote.

Do you do drywall installation in Ormsby Place?

Yes — Ormsby Place is part of our regular service area. We cover Ormsby Place, Ambleton, Aldergrove, Belmead, Callingwood North and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.

How long does drywall installation take in an Ormsby Place home?

A standard basement in an Ormsby Place home typically takes one to two days to board. An Ormsby Place new build or sizeable reno takes correspondingly longer. At the Ormsby Place quote you get the true install timeline. The finishers can usually begin the following day in Ormsby Place.

What board do you use on exterior basement walls in Edmonton?

In Ormsby Place, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Ormsby Place interior walls get standard 1/2” board. Legal suites in Ormsby Place take 5/8” Type X on the ceiling and soundproof party walls. Each Ormsby Place surface gets its board product confirmed at the quote.

Drywall Installation Ormsby Place | New Board

Drywall installation in Ormsby Place — right board, right spec, ready to tape

A good Ormsby Place finish starts with good boarding. In Ormsby Place the board goes up level, correctly screwed, seams on framing, clean cuts at mechanical and corners. Ormsby Place is one of West Edmonton’s newest communities — most homes have framed, unfinished basements ready for boarding. We cover Ormsby Place, Aldergrove, Belmead, Callingwood North and the surrounding area, 7 days a week.

Fire-rated and soundproof board for Ormsby Place legal-suite separations
In Ormsby Place, correct screw spacing and seams on framing throughout
Bulkheads, soffits, archways and vaulted ceiling work
No rework in Ormsby Place: tape-ready boarding when we go
Left ready for taper — no rework needed
Ormsby Place boarding left tape-ready, no rework for the finishers
Ormsby Place basements boarded in order: ceiling, then walls

What affects the cost of drywall installation in Ormsby Place?

Square footage, board type and ceiling complexity in Ormsby Place

The cost of drywall installation in Ormsby Place comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaults, bulkheads and soffits add time), and new development vs renovation around the existing Ormsby Place trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec for Ormsby Place homes — right product on every surface

Not every surface in an Ormsby Place home needs the same board. Exterior foundation walls need moisture-resistant. In Ormsby Place, every bathroom and laundry wall takes moisture-resistant board. An Ormsby Place suite ceiling requires 5/8” Type X fire-rated board. In Ormsby Place, suite-to-living party walls do better with STC soundproof board. For dry Ormsby Place interior walls, standard 1/2” board is right. In Ormsby Place, the correct board per surface is set at the quote, not after inspection.

Ormsby Place drywall in context

About Ormsby Place

Named for the man responsible for developing Edmonton's grid system of numbering streets and avenues, Ormsby Place is located in the City's west end.

What we see in Ormsby Place

In Ormsby Place the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Our Ormsby Place drywall installation process, step by step

Ceiling board first, always

Every boarding job in Ormsby Place starts with the ceiling, because the wall board butts up under it and helps carry it. Reversing the sequence leaves Ormsby Place ceiling joints unsupported and more likely to crack later.

Wall boarding, screw pattern and seams

Wall board goes up with the correct screw pattern and every seam lands on framing. When the Ormsby Place boarding is done, the taping crew can start immediately with no rework.

Drywall installation work we do in Ormsby Place

Room addition and partition boarding in Ormsby Place homes

Ormsby Place homes from the late 1980s and 1990s are at the age where homeowners are adding partitions, converting rooms and opening up floor plans. New walls go up and existing rooms get reboarded when layouts change. We hang standard 1/2” board on all new partition walls, confirm the framing is square before we start and leave the new walls ready for the taping crew. Board seams land on studs, corners are clean and nothing is proud of the adjacent surface.

Water damage reboarding in Ormsby Place

Water damage in Ormsby Place homes from the late 1980s and 1990s is one of the most common boarding calls we get. A bathroom leak, a roof problem or a burst pipe means the affected board comes out and new board goes up on the exposed framing. We assess what needs to come down, remove only what is damaged, re-board to match the existing surface height and leave the wall ready for taping.

Why Ormsby Place homeowners trust Emplastrum for drywall installation

Boarding done right means the finish can be done right in Ormsby Place

The quality of a Level 4 wall finish starts with the boarding behind it. Poorly hung Ormsby Place board — not level, seams mid-bay, screws too far — fights the finish. We board every Ormsby Place job the way a taping specialist would want it boarded — because we are the taping specialist. When we finish the boarding, we can finish the taping to Level 4 without fighting the installation underneath.

Fixed price, same-day reply, all four Edmonton quadrants, Edmonton, Aldergrove, Belmead, Callingwood North and Edmonton

We cover all four Edmonton quadrants, Edmonton, Aldergrove, Belmead, Callingwood North and Edmonton, 7 days a week — Ormsby Place, Aldergrove, Belmead, Callingwood North and every community in between. Fixed Ormsby Place pricing means the pre-start figure survives arrival.

What affects the cost of drywall installation in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Ormsby Place bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Ormsby Place, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

Our Edmonton drywall installation process, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. The Ormsby Place ceiling finishes before any wall boarding starts.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Ormsby Place corners, inside and outside, come out square and clean. Board never runs past the openings on Ormsby Place jobs. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

How it works

Simple, clean, on schedule — Drywall Installation in Ormsby Place

Free quote

We come out to your Ormsby Place property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Ormsby Place starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Ormsby Place. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Ormsby Place home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Ormsby Place. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Ormsby Place trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Ormsby Place.

Read our reviews on Google

FAQ — Drywall Installation Ormsby Place

Drywall Installation Ormsby Place: your questions answered

How long does drywall installation take in a Edmonton home?: A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. At the Ormsby Place quote you get the true install timeline. The taping crew can usually start the next day.
Does Ormsby Place taping follow straight after boarding?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Ormsby Place.
What board do you use for exterior basement walls in Ormsby Place?: Every Ormsby Place foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Ormsby Place interior walls away from moisture take standard 1/2” board. Ormsby Place suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Ormsby Place surface is set at the on-site quote.
Do you do drywall installation in Ormsby Place?: Yes — Ormsby Place is part of our regular service area. We cover Ormsby Place, Ambleton, Aldergrove, Belmead, Callingwood North and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.
How long does drywall installation take in an Ormsby Place home?: A standard basement in an Ormsby Place home typically takes one to two days to board. An Ormsby Place new build or sizeable reno takes correspondingly longer. At the Ormsby Place quote you get the true install timeline. The finishers can usually begin the following day in Ormsby Place.
What board do you use on exterior basement walls in Edmonton?: In Ormsby Place, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Ormsby Place interior walls get standard 1/2” board. Legal suites in Ormsby Place take 5/8” Type X on the ceiling and soundproof party walls. Each Ormsby Place surface gets its board product confirmed at the quote.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Ormsby Place

Drywall installation in Ormsby Place &mdash; right board, right spec, ready to tape