How long does drywall installation take in an Kirkness home?

A standard basement in an Kirkness home typically takes one to two days to board. A full Kirkness new-build or a larger renovation takes longer. We give Kirkness homeowners a realistic timeline at the on-site quote. The Kirkness taping crew can usually start the day after boarding is complete.

Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Kirkness. The Kirkness ceiling board is carried in part by the wall board butting under it. In Kirkness, reversing the boarding order leaves ceiling joints unsupported and prone to cracking. No Kirkness wall board goes up before the ceiling is complete.

Do you board for legal suites in Edmonton?

Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.

For Kirkness exterior basement walls, what board do you use?

In Kirkness, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Kirkness home.

How long does drywall installation take in an Kirkness home?

Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Kirkness are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.

Can the taping crew start right after you board an Kirkness home?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Kirkness.

Drywall Installation Kirkness | New Board

Drywall installation in Kirkness, hung straight and screwed off right

Good drywall installation is what makes a good Kirkness finish possible. We hang Kirkness board level, use the correct screw pattern, land all seams on framing and cut around mechanical and corners cleanly. Kirkness homes from the late 1980s and 1990s are at the age where renovation room additions and water damage reboarding are the most common boarding calls. We cover Kirkness, Balwin, Bannerman, Belmont and the surrounding area, 7 days a week.

Kirkness legal-suite separations get fire-rated and soundproof board
Correct screw pattern throughout Kirkness — all seams on framing
Tape-ready Kirkness boarding, nothing for the taping crew to fix
Drywall boarding and hanging in Kirkness — new builds and renovations
Basement boarding — ceiling first, walls second
Drywall boarding in Kirkness — new builds and renovations
Basement development boarding in Kirkness — ceiling first, then walls

What affects the cost of drywall installation in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Kirkness wet rooms — bath and laundry — get moisture board throughout. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. Standard 1/2” suits Kirkness interior walls clear of moisture. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

Kirkness drywall in context

About Kirkness

Located in the Clareview district, this area is named for James Kirkness, a Hudson's Bay Company employee who came here from Scotland in 1866.

What we see in Kirkness

In Kirkness the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Why Kirkness homeowners trust Emplastrum for drywall installation

Boarding done right means the finish can be done right in Kirkness

The quality of a Level 4 wall finish starts with the boarding behind it. Un-level Kirkness board, mid-field seams or wide screw spacing all make trouble for the finishers. We board every Kirkness job the way a taping specialist would want it boarded — because we are the taping specialist. When we finish the boarding, we can finish the taping to Level 4 without fighting the installation underneath.

Fixed price, same-day reply, all four Edmonton quadrants, Edmonton, Balwin, Bannerman, Belmont and Edmonton

We cover all four Edmonton quadrants, Edmonton, Balwin, Bannerman, Belmont and Edmonton, 7 days a week — Kirkness, East Hills, Applewood, Edmonton, Balwin, Bannerman, Belmont and Penbrooke and every community in between. Your Kirkness quote is free and the price fixed — it holds when we arrive.

Drywall board types for Kirkness homes

Standard board for most walls

Standard 1/2-inch drywall is correct for most interior walls and ceilings in Kirkness away from moisture exposure.

Moisture-resistant, fire-rated and soundproof where the spec matters

Exterior basement walls and wet areas need moisture-resistant board; legal suite ceilings need fire-rated board; party walls need soundproof board. We specify the right product for every Kirkness surface before we pull the first sheet.

Drywall Installation work we do in Kirkness

Renovation boarding in 1960s and 1970s Kirkness homes

The most common drywall installation call from Kirkness is renovation work. Walls come down for a kitchen open-up, a bathroom move or a structural change, and new board goes up on the exposed framing. Kirkness homes from this era often have original plaster or early drywall that does not match modern board thickness — we assess the framing and select the right board thickness so the surface is consistent.

Bathroom and wet-area boarding in Kirkness — moisture-resistant board

Bathroom renovations in Kirkness homes require moisture-resistant board behind tile and around any plumbing chase. We hang moisture-resistant board properly so the tile substrate is solid and the installation holds for the long term.

Why Kirkness homeowners trust Emplastrum for drywall installation

Boarding done right means the finish can be done right in Kirkness

Fixed price, same-day reply, all four Edmonton quadrants, Edmonton, Balwin, Bannerman, Belmont and Edmonton

We cover all four Edmonton quadrants, Edmonton, Balwin, Bannerman, Belmont and Edmonton, 7 days a week — Kirkness, Balwin, Bannerman, Belmont and every community in between. Your Kirkness quote is free and the price fixed — it holds when we arrive.

Our drywall installation process in Kirkness, step by step

Ceiling board first — always — in Kirkness homes

Every boarding job in Kirkness starts with the ceiling. Ceiling board goes up before the walls in Kirkness because the wall board butts up under the ceiling board and helps support it. Skipping that sequence means the Kirkness ceiling joints carry their own weight unsupported and are more likely to crack. We do not start Kirkness walls until the ceiling is done. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Kirkness

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. All Kirkness seams land on framing, not between studs. Inside and outside Kirkness corners are clean and square. Kirkness board does not run past window and door frames. When the boarding is done in an Kirkness home, every surface is at the right plane and the taping crew can go straight to work.

How it works

Simple, clean, on schedule — Drywall Installation in Kirkness

Free quote

We come out to your Kirkness property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Kirkness starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Kirkness. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Kirkness home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Kirkness. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Kirkness trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Kirkness.

Read our reviews on Google

FAQ — Drywall Installation Kirkness

Drywall Installation Kirkness: your questions answered

How long does drywall installation take in an Kirkness home?: A standard basement in an Kirkness home typically takes one to two days to board. A full Kirkness new-build or a larger renovation takes longer. We give Kirkness homeowners a realistic timeline at the on-site quote. The Kirkness taping crew can usually start the day after boarding is complete.
Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Kirkness. The Kirkness ceiling board is carried in part by the wall board butting under it. In Kirkness, reversing the boarding order leaves ceiling joints unsupported and prone to cracking. No Kirkness wall board goes up before the ceiling is complete.
Do you board for legal suites in Edmonton?: Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.
For Kirkness exterior basement walls, what board do you use?: In Kirkness, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Kirkness home.
How long does drywall installation take in an Kirkness home?: Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Kirkness are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.
Can the taping crew start right after you board an Kirkness home?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Kirkness.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Kirkness

Drywall installation in Kirkness, hung straight and screwed off right