Do you cover all of Edmonton for drywall installation?

Yes — we cover all four Edmonton quadrants, Edmonton, Avonmore, Bonnie Doon, Capilano, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.

How long does drywall installation take in a King Edward Park home?

A standard basement in a King Edward Park home typically takes one to two days to board. New construction or a big reno in King Edward Park runs a longer schedule. The King Edward Park timeline you get at the quote is realistic, not optimistic. In King Edward Park, finishing usually begins the day after boarding wraps.

Do you stand behind your installation work in King Edward Park?

Yes. Before leaving King Edward Park, we walk the boarding together and fix anything not right.

Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in King Edward Park. In King Edward Park, the wall board tucks under the ceiling board to support it. Out of order, King Edward Park ceiling joints carry their own weight and crack sooner. In King Edward Park, walls wait until the ceiling is boarded.

What board do you use for exterior basement walls in King Edward Park?

Moisture-resistant board on all King Edward Park exterior foundation walls and around plumbing and laundry. Standard 1/2” board for King Edward Park interior walls away from moisture. For King Edward Park legal suites: 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify the right product for each King Edward Park surface at the on-site quote.

Do you board for legal suites in King Edward Park?

Yes, and we know the spec. A legal secondary suite in King Edward Park requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. The King Edward Park suite is boarded to that spec, and inspection follows.

Drywall Installation King Edward Park | New Board

Drywall installation in King Edward Park, hung straight and screwed off right

A good King Edward Park finish starts with good boarding. In King Edward Park the board goes up level, correctly screwed, seams on framing, clean cuts at mechanical and corners. King Edward Park is one of Southeast’s newest communities — most homes have framed, unfinished basements ready for boarding. We cover King Edward Park, Avonmore, Bonnie Doon, Capilano and the surrounding area, 7 days a week.

Basement boarding — ceiling first, walls second
Drywall boarding in King Edward Park — new builds and renovations
Basement development boarding in King Edward Park — ceiling first, then walls
Exterior and wet-area King Edward Park walls boarded moisture-resistant
Drywall boarding and hanging — new builds and renovations
King Edward Park screw spacing to spec, seams landed on framing
Renovation reboarding — removing old board, installing new to current spec

Why King Edward Park homeowners trust Emplastrum for drywall installation

Boarding done right means the finish can be done right in King Edward Park

The quality of a Level 4 wall finish starts with the boarding behind it. Poorly hung King Edward Park board — not level, seams mid-bay, screws too far — fights the finish. We board every King Edward Park job the way a taping specialist would want it boarded — because we are the taping specialist. When we finish the boarding, we can finish the taping to Level 4 without fighting the installation underneath.

Fixed price, same-day reply, all four Edmonton quadrants, Edmonton, Avonmore, Bonnie Doon, Capilano and Edmonton

We cover all four Edmonton quadrants, Edmonton, Avonmore, Bonnie Doon, Capilano and Edmonton, 7 days a week — King Edward Park, Avonmore, Bonnie Doon, Capilano and every community in between. Fixed King Edward Park pricing means the pre-start figure survives arrival.

King Edward Park drywall in context

About King Edward Park

King Edward Park was farmed as early as the 1870s and annexed in 1912 but most development didn't occur until the 1950s.

What we see in King Edward Park

In King Edward Park the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

What affects the cost of drywall installation in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all King Edward Park bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In King Edward Park, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

Our Edmonton drywall installation process, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. The King Edward Park ceiling finishes before any wall boarding starts.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. King Edward Park corners, inside and outside, come out square and clean. Board never runs past the openings on King Edward Park jobs. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

What affects the cost of drywall installation in King Edward Park?

Square footage, board type and ceiling complexity in King Edward Park

The cost of drywall installation in King Edward Park comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaulted areas, bulkheads and soffits take longer), plus whether it is new build or reno around King Edward Park fixtures and trades. We measure on site and give you a fixed price before we start.

Board spec for King Edward Park homes — right product on every surface

Not every surface in a King Edward Park home needs the same board. Exterior foundation walls need moisture-resistant. Moisture-resistant board on all King Edward Park bathroom and laundry walls. In King Edward Park, suite ceilings take 5/8” Type X fire-rated. A King Edward Park suite party wall gains from STC soundproof board. In King Edward Park, moisture-free interior walls use standard 1/2” board. Each King Edward Park surface gets its product at the quote, before any inspector flags it.

Drywall installation work we do in King Edward Park

Basement development and new builds

Basement development boarding is a common call — ceiling first, then walls, with moisture-resistant board on every exterior foundation wall.

Renovation boarding and additions

We also board after walls come down for kitchen open-ups, additions and bathroom relocations in King Edward Park, matching thickness and plane to the adjacent surfaces so there is no visible seam once finished.

Why King Edward Park homeowners call Emplastrum

Fixed price, Level 4 standard, 7 days a week in King Edward Park

We give King Edward Park homeowners a fixed price at the on-site quote. The number does not change. We tape every joint to Level 4, match every texture precisely and leave the surface paint-ready when we leave.

We cover King Edward Park, Avonmore, Bonnie Doon, Capilano and surrounding communities

Free on-site quotes, same-day reply, 7 days a week. Call or text ' . emp_phone() . '.

How it works

Simple, clean, on schedule — Drywall Installation in King Edward Park

Free quote

We come out to your King Edward Park property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in King Edward Park starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in King Edward Park. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your King Edward Park home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in King Edward Park. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor King Edward Park trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in King Edward Park.

Read our reviews on Google

FAQ — Drywall Installation King Edward Park

Drywall Installation King Edward Park: your questions answered

Do you cover all of Edmonton for drywall installation?: Yes — we cover all four Edmonton quadrants, Edmonton, Avonmore, Bonnie Doon, Capilano, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.
How long does drywall installation take in a King Edward Park home?: A standard basement in a King Edward Park home typically takes one to two days to board. New construction or a big reno in King Edward Park runs a longer schedule. The King Edward Park timeline you get at the quote is realistic, not optimistic. In King Edward Park, finishing usually begins the day after boarding wraps.
Do you stand behind your installation work in King Edward Park?: Yes. Before leaving King Edward Park, we walk the boarding together and fix anything not right.
Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in King Edward Park. In King Edward Park, the wall board tucks under the ceiling board to support it. Out of order, King Edward Park ceiling joints carry their own weight and crack sooner. In King Edward Park, walls wait until the ceiling is boarded.
What board do you use for exterior basement walls in King Edward Park?: Moisture-resistant board on all King Edward Park exterior foundation walls and around plumbing and laundry. Standard 1/2” board for King Edward Park interior walls away from moisture. For King Edward Park legal suites: 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify the right product for each King Edward Park surface at the on-site quote.
Do you board for legal suites in King Edward Park?: Yes, and we know the spec. A legal secondary suite in King Edward Park requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. The King Edward Park suite is boarded to that spec, and inspection follows.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation King Edward Park

Drywall installation in King Edward Park, hung straight and screwed off right