How long does drywall installation take in an Kensington home?

A standard basement in an Kensington home typically takes one to two days to board. New construction or a big reno in Kensington runs a longer schedule. The Kensington timeline you get at the quote is realistic, not optimistic. In Kensington, finishing usually begins the day after boarding wraps.

Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Kensington. The Kensington wall board butts under the ceiling board and helps carry it. Reversing the sequence leaves Kensington ceiling joints carrying their own weight unsupported — more likely to crack over time. We do not start Kensington walls until the ceiling is done.

What board do you use for exterior basement walls in Kensington?

In Kensington, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Kensington interior walls get standard 1/2” board. Legal suites in Kensington take 5/8” Type X on the ceiling and soundproof party walls. Each Kensington surface gets its board product confirmed at the quote.

How long does drywall installation take in a Edmonton home?

A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Kensington: the quoted timeline is the real one. The taping crew can usually start the next day.

Do you do drywall installation in Kensington?

Yes — Kensington is part of our regular service area, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.

How do you handle texture matching after drywall installation work in Kensington?

Texture matching is part of every repair and patch job we do in Kensington. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.

Drywall Installation Kensington | New Board

Drywall installation in Kensington — right board, right spec, ready to tape

A good Kensington finish starts with good boarding. In Kensington the board goes up level, correctly screwed, seams on framing, clean cuts at mechanical and corners. Kensington is one of Northwest’s newest communities — most homes have framed, unfinished basements ready for boarding. We cover Kensington, Ambleton, Albany, Athlone, Baranow and the surrounding area, 7 days a week.

Right screw pattern, all seams landed on framing in Kensington
Moisture-resistant board for Kensington exterior and wet-area walls
Fire-rated 5/8” Type X on suite ceilings where required
Kensington exterior walls and wet areas get moisture-resistant board
Fire-rated and soundproof board for Kensington legal-suite separations
In Kensington, correct screw spacing and seams on framing throughout
Bulkheads, soffits, archways and vaulted ceiling work

Drywall installation work we do in Kensington

Renovation boarding in 1950s, 1960s and 1970s Kensington homes

The most common drywall installation call from Kensington is renovation work on a home built in the 1950s, 1960s and 1970s. Walls come down for a kitchen open-up, a bathroom move or a structural change, and new board goes up on the exposed framing. Kensington homes from this era often have original plaster or early drywall that does not match modern board thickness — we assess the framing, select the right board thickness and hang it so the surface is consistent with the adjacent walls.

Bathroom and wet-area boarding in Kensington — moisture-resistant board

Bathroom renovations in Kensington homes require moisture-resistant board behind tile, on all walls adjacent to showers and tubs, and around any plumbing chase. We hang moisture-resistant board properly — staggered joints, correct screw pattern, no seams in high-exposure corners — so the tile substrate is solid and the installation holds for the long term. Older Kensington homes often have green board or even drywall behind original tile; when that comes down, we re-board to current standards.

Kensington drywall in context

About Kensington

Kensington was annexed to the City in 1913 during a real estate boom but most development didn't occur until the 1950s.

What we see in Kensington

In Kensington the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

About Drywall Installation in Kensington

Drywall Installation in Kensington — what to expect

We provide drywall installation services in Kensington and surrounding communities, 7 days a week. Kensington is one of Northwest’s oldest communities, with homes from the 1960s and 1970s. Renovation drywall, stipple and popcorn ceiling removal and crack repair are among the most common drywall calls from this established Northwest area.

Fixed price — assessed on site in Kensington

We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin unless the scope changes and we agree on it first.

Our drywall installation process in Kensington, step by step

Ceiling board first — always — in Kensington homes

Every boarding job in Kensington starts with the ceiling. In Kensington we board ceilings first — the wall board tucks under and helps carry the ceiling. Skip the Kensington order and the ceiling joints go unsupported and crack. In Kensington, walls wait until the ceiling is boarded. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Kensington

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. In Kensington, every seam lands on framing, never mid-bay. In Kensington, every inside and outside corner is square and clean. In Kensington, board stops clean at window and door frames. When the boarding is done in an Kensington home, every surface is at the right plane and the taping crew can go straight to work.

Why Kensington homeowners trust Emplastrum for drywall installation

We board the way a finishing specialist wants it boarded

Every taping problem we have fixed in Kensington started with a boarding problem underneath it. We board every Kensington job the way we would want it boarded before we tape it.

Fixed price, same-day reply

We install drywall across Kensington and Northwest, 7 days a week. Free on-site Kensington quotes and fixed prices, and we stand behind the work. If anything is off on an Kensington install, we return and put it right.

Why Kensington homeowners trust Emplastrum for drywall installation

Boarding done right means the finish can be done right in Kensington

The quality of a Level 4 wall finish starts with the boarding behind it. Board in Kensington that is not level, has seams mid-field or screws too far apart creates problems the taping crew has to fight. We board every Kensington job the way a taping specialist would want it boarded — because we are the taping specialist. When we finish the boarding, we can finish the taping to Level 4 without fighting the installation underneath.

Fixed price, same-day reply, all four Edmonton quadrants, Edmonton, Albany, Athlone, Baranow and Edmonton

We cover all four Edmonton quadrants, Edmonton, Albany, Athlone, Baranow and Edmonton, 7 days a week — Kensington, Albany, Athlone, Baranow and every community in between. Free on-site Kensington quotes, fixed prices — the number you get before we start does not change on site.

What affects the cost of drywall installation in Kensington?

Square footage, board type and ceiling complexity in Kensington

The cost of drywall installation in Kensington comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaulted areas, bulkheads and soffits take longer), plus whether it is new build or reno around Kensington fixtures and trades. We measure on site and give you a fixed price before we start.

Board spec for Kensington homes — right product on every surface

Not every surface in an Kensington home needs the same board. Exterior foundation walls need moisture-resistant. Moisture-resistant board on all Kensington bathroom and laundry walls. In Kensington, suite ceilings take 5/8” Type X fire-rated. An Kensington suite party wall gains from STC soundproof board. In Kensington, moisture-free interior walls use standard 1/2” board. Each Kensington surface gets its product at the quote, before any inspector flags it.

How it works

Simple, clean, on schedule — Drywall Installation in Kensington

Free quote

We come out to your Kensington property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Kensington starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Kensington. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Kensington home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Kensington. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Kensington trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Kensington.

Read our reviews on Google

FAQ — Drywall Installation Kensington

Drywall Installation Kensington: your questions answered

How long does drywall installation take in an Kensington home?: A standard basement in an Kensington home typically takes one to two days to board. New construction or a big reno in Kensington runs a longer schedule. The Kensington timeline you get at the quote is realistic, not optimistic. In Kensington, finishing usually begins the day after boarding wraps.
Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Kensington. The Kensington wall board butts under the ceiling board and helps carry it. Reversing the sequence leaves Kensington ceiling joints carrying their own weight unsupported — more likely to crack over time. We do not start Kensington walls until the ceiling is done.
What board do you use for exterior basement walls in Kensington?: In Kensington, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Kensington interior walls get standard 1/2” board. Legal suites in Kensington take 5/8” Type X on the ceiling and soundproof party walls. Each Kensington surface gets its board product confirmed at the quote.
How long does drywall installation take in a Edmonton home?: A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Kensington: the quoted timeline is the real one. The taping crew can usually start the next day.
Do you do drywall installation in Kensington?: Yes — Kensington is part of our regular service area, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.
How do you handle texture matching after drywall installation work in Kensington?: Texture matching is part of every repair and patch job we do in Kensington. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Kensington

Drywall installation in Kensington &mdash; right board, right spec, ready to tape