How long does drywall installation take in an Hillview home?

A standard basement in an Hillview home typically takes one to two days to board. In Hillview, a full new build or major renovation stretches the timeline. Honest scheduling in Hillview: the quoted timeline is the real one. Taping typically starts next-day on Hillview jobs.

What board do you use on exterior basement walls in Edmonton?

Moisture-resistant board covers the Hillview foundation walls and the plumbing and laundry zones. Standard 1/2” board on dry Hillview interior walls. The Hillview suite build: fire-rated 5/8” Type X ceiling, soundproofed party walls. We lock the Hillview board spec per surface at quote time.

Do you board legal suites to spec?

Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.

Do you serve Hillview on weekends?

Yes — we cover Hillview and surrounding communities seven days a week. Call or text ' . emp_phone() . ' for a same-day reply.

Do you stand behind your installation work in Hillview?

Yes. We walk the finished Hillview boarding with you before we leave, and if something is not right we come back and make it right.

Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Hillview. Wall board under ceiling board helps hold the Hillview ceiling. Flip the Hillview sequence and the ceiling joints go unsupported — cracks follow. The Hillview ceiling finishes before any wall boarding starts.

Drywall Installation Hillview | New Board

Drywall installation in Hillview, hung straight and screwed off right

The Hillview finish is only as good as the boarding under it. We board Hillview level with proper screws, framed seams and tidy cuts around corners and mechanical. Hillview is a higher-end Mill Woods and Meadows community where boarding quality is expected to be consistent with the quality of the rest of the home. We cover Hillview, Bisset, Crawford Plains, Daly Grove and the surrounding area, 7 days a week.

Fire-rated and soundproof board for Hillview legal-suite separations
In Hillview, correct screw spacing and seams on framing throughout
Bulkheads, soffits, archways and vaulted ceiling work
No rework in Hillview: tape-ready boarding when we go
Left ready for taper — no rework needed
Hillview boarding left tape-ready, no rework for the finishers
Hillview basements boarded in order: ceiling, then walls

About Drywall Installation in Hillview

Drywall Installation in Hillview — what to expect

We provide drywall installation services in Hillview and surrounding communities, 7 days a week. Hillview is one of Mill Woods and Meadows’s oldest communities, with homes from the 1960s and 1970s. Renovation drywall, stipple and popcorn ceiling removal and crack repair are among the most common drywall calls from this established Mill Woods and Meadows area.

Fixed price — assessed on site in Hillview

We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin unless the scope changes and we agree on it first.

Hillview drywall in context

About Hillview

Hillview is located immediately to the north of the Grey Nuns Community Hospital.

What we see in Hillview

In Hillview the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Our drywall installation process in Hillview, step by step

Ceiling board first — always — in Hillview homes

Every boarding job in Hillview starts with the ceiling. In Hillview we board ceilings first — the wall board tucks under and helps carry the ceiling. Skip the Hillview order and the ceiling joints go unsupported and crack. In Hillview, walls wait until the ceiling is boarded. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Hillview

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. In Hillview, every seam lands on framing, never mid-bay. In Hillview, every inside and outside corner is square and clean. In Hillview, board stops clean at window and door frames. When the boarding is done in an Hillview home, every surface is at the right plane and the taping crew can go straight to work.

Why Hillview homeowners trust Emplastrum for drywall installation

We board the way a finishing specialist wants it boarded

Every taping problem we have fixed in Hillview started with a boarding problem underneath it. We board every Hillview job the way we would want it boarded before we tape it.

Fixed price, same-day reply

We install drywall across Hillview and Mill Woods and Meadows, 7 days a week. Free on-site Hillview quotes and fixed prices, and we stand behind the work. If anything is off on an Hillview install, we return and put it right.

Why Hillview homeowners trust Emplastrum for drywall installation

Boarding done right means the finish can be done right in Hillview

The quality of a Level 4 wall finish starts with the boarding behind it. Board in Hillview that is not level, has seams mid-field or screws too far apart creates problems the taping crew has to fight. We board every Hillview job the way a taping specialist would want it boarded — because we are the taping specialist. When we finish the boarding, we can finish the taping to Level 4 without fighting the installation underneath.

Fixed price, same-day reply, all four Edmonton quadrants, Edmonton, Bisset, Crawford Plains, Daly Grove and Edmonton

We cover all four Edmonton quadrants, Edmonton, Bisset, Crawford Plains, Daly Grove and Edmonton, 7 days a week — Hillview, Bisset, Crawford Plains, Daly Grove and every community in between. Free on-site Hillview quotes, fixed prices — the number you get before we start does not change on site.

What affects the cost of drywall installation in Hillview?

Square footage, board type and ceiling complexity in Hillview

The cost of drywall installation in Hillview comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaulted areas, bulkheads and soffits take longer), plus whether it is new build or reno around Hillview fixtures and trades. We measure on site and give you a fixed price before we start.

Board spec for Hillview homes — right product on every surface

Not every surface in an Hillview home needs the same board. Exterior foundation walls need moisture-resistant. Moisture-resistant board on all Hillview bathroom and laundry walls. In Hillview, suite ceilings take 5/8” Type X fire-rated. An Hillview suite party wall gains from STC soundproof board. In Hillview, moisture-free interior walls use standard 1/2” board. Each Hillview surface gets its product at the quote, before any inspector flags it.

Our Edmonton drywall installation process, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. No Hillview wall board goes up before the ceiling is complete.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Clean, square corners — inside and out — on Hillview jobs. We hold Hillview board to the window and door frames, no overrun. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

How it works

Simple, clean, on schedule — Drywall Installation in Hillview

Free quote

We come out to your Hillview property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Hillview starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Hillview. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Hillview home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Hillview. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Hillview trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Hillview.

Read our reviews on Google

FAQ — Drywall Installation Hillview

Drywall Installation Hillview: your questions answered

How long does drywall installation take in an Hillview home?: A standard basement in an Hillview home typically takes one to two days to board. In Hillview, a full new build or major renovation stretches the timeline. Honest scheduling in Hillview: the quoted timeline is the real one. Taping typically starts next-day on Hillview jobs.
What board do you use on exterior basement walls in Edmonton?: Moisture-resistant board covers the Hillview foundation walls and the plumbing and laundry zones. Standard 1/2” board on dry Hillview interior walls. The Hillview suite build: fire-rated 5/8” Type X ceiling, soundproofed party walls. We lock the Hillview board spec per surface at quote time.
Do you board legal suites to spec?: Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.
Do you serve Hillview on weekends?: Yes — we cover Hillview and surrounding communities seven days a week. Call or text ' . emp_phone() . ' for a same-day reply.
Do you stand behind your installation work in Hillview?: Yes. We walk the finished Hillview boarding with you before we leave, and if something is not right we come back and make it right.
Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Hillview. Wall board under ceiling board helps hold the Hillview ceiling. Flip the Hillview sequence and the ceiling joints go unsupported — cracks follow. The Hillview ceiling finishes before any wall boarding starts.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Hillview

Drywall installation in Hillview, hung straight and screwed off right