How long does drywall installation take in an Fraser home?

A standard basement in an Fraser home typically takes one to two days to board. An Fraser new build or sizeable reno takes correspondingly longer. At the Fraser quote you get the true install timeline. The finishers can usually begin the following day in Fraser.

What board do you use on exterior basement walls in Edmonton?

In Fraser, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Fraser interior walls get standard 1/2” board. Legal suites in Fraser take 5/8” Type X on the ceiling and soundproof party walls. Each Fraser surface gets its board product confirmed at the quote.

Do you do drywall installation in Fraser?

Yes — Fraser is part of our regular service area. We cover Fraser, East Hills, Applewood and Edmonton and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.

Do you do drywall installation in Fraser?

Yes — Fraser is part of our regular service area. We cover Fraser, Balwin, Bannerman, Belmont and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.

How long does drywall installation take in an Fraser home?

A standard basement in an Fraser home typically takes one to two days to board. New construction or a big reno in Fraser runs a longer schedule. The Fraser timeline you get at the quote is realistic, not optimistic. In Fraser, finishing usually begins the day after boarding wraps.

Drywall Installation Fraser | New Board

Drywall installation in Fraser, hung straight and screwed off right

In Fraser, the finish rides on the install — seams on framing, right screw pattern, board plumb pre-mud. In Fraser we board new builds, basements and renovations the way a finishing specialist wants it boarded. Fraser is this established Northeast community where reno, repair and ceiling drywall are common, so the installation work here is usually settling cracks, nail pops and tired texture. We cover Fraser, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Fraser board hung on the correct screw pattern, seams on framing
Ready for taping when we leave an Fraser job — no rework
Ceiling-first, then-walls basement boarding in Fraser
Ceiling-then-walls basement boarding across Fraser
Moisture-resistant board on exterior foundation walls and wet areas
Fraser basement development boarded ceiling-first, then walls
Moisture-resistant board on Fraser exterior walls and wet areas

What affects the cost of drywall installation in Fraser?

Square footage, board type and ceiling complexity in Fraser

The cost of drywall installation in Fraser comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaults, bulkheads and soffits add time), and new development vs renovation around the existing Fraser trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec for Fraser homes — right product on every surface

Not every surface in an Fraser home needs the same board. Exterior foundation walls need moisture-resistant. In Fraser, every bathroom and laundry wall takes moisture-resistant board. An Fraser suite ceiling requires 5/8” Type X fire-rated board. In Fraser, suite-to-living party walls do better with STC soundproof board. For dry Fraser interior walls, standard 1/2” board is right. In Fraser, the correct board per surface is set at the quote, not after inspection.

Fraser drywall in context

About Fraser

Named for John Fraser, an original homesteader in the area and one of the first trustees of the Belmont School, Fraser is located in the City's far northwest.

What we see in Fraser

In Fraser the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Our Fraser drywall installation process, step by step

Ceiling board first, always

Every boarding job in Fraser starts with the ceiling, because the wall board butts up under it and helps carry it. Reversing the sequence leaves Fraser ceiling joints unsupported and more likely to crack later.

Wall boarding, screw pattern and seams

Wall board goes up with the correct screw pattern and every seam lands on framing. When the Fraser boarding is done, the taping crew can start immediately with no rework.

Drywall installation work we do in Fraser

Room addition and partition boarding in Fraser homes

Fraser homes from the late 1980s and 1990s are at the age where homeowners are adding partitions, converting rooms and opening up floor plans. New walls go up and existing rooms get reboarded when layouts change. We hang standard 1/2” board on all new partition walls, confirm the framing is square before we start and leave the new walls ready for the taping crew. Board seams land on studs, corners are clean and nothing is proud of the adjacent surface.

Water damage reboarding in Fraser

Water damage in Fraser homes from the late 1980s and 1990s is one of the most common boarding calls we get. A bathroom leak, a roof problem or a burst pipe means the affected board comes out and new board goes up on the exposed framing. We assess what needs to come down, remove only what is damaged, re-board to match the existing surface height and leave the wall ready for taping.

Why Fraser homeowners trust Emplastrum for drywall installation

Boarding done right means the finish can be done right in Fraser

The quality of a Level 4 wall finish starts with the boarding behind it. Poorly hung Fraser board — not level, seams mid-bay, screws too far — fights the finish. We board every Fraser job the way a taping specialist would want it boarded — because we are the taping specialist. When we finish the boarding, we can finish the taping to Level 4 without fighting the installation underneath.

Fixed price, same-day reply, all four Edmonton quadrants, Edmonton, Balwin, Bannerman, Belmont and Edmonton

We cover all four Edmonton quadrants, Edmonton, Balwin, Bannerman, Belmont and Edmonton, 7 days a week — Fraser, Balwin, Bannerman, Belmont and every community in between. Fixed Fraser pricing means the pre-start figure survives arrival.

What affects the cost of drywall installation in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Fraser bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Fraser, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

Our Edmonton drywall installation process, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. The Fraser ceiling finishes before any wall boarding starts.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Fraser corners, inside and outside, come out square and clean. Board never runs past the openings on Fraser jobs. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

How it works

Simple, clean, on schedule — Drywall Installation in Fraser

Free quote

We come out to your Fraser property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Fraser starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Fraser. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Fraser home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Fraser. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Fraser trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Fraser.

Read our reviews on Google

FAQ — Drywall Installation Fraser

Drywall Installation Fraser: your questions answered

How long does drywall installation take in an Fraser home?: A standard basement in an Fraser home typically takes one to two days to board. An Fraser new build or sizeable reno takes correspondingly longer. At the Fraser quote you get the true install timeline. The finishers can usually begin the following day in Fraser.
What board do you use on exterior basement walls in Edmonton?: In Fraser, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Fraser interior walls get standard 1/2” board. Legal suites in Fraser take 5/8” Type X on the ceiling and soundproof party walls. Each Fraser surface gets its board product confirmed at the quote.
Do you do drywall installation in Fraser?: Yes — Fraser is part of our regular service area. We cover Fraser, East Hills, Applewood and Edmonton and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.
Do you do drywall installation in Fraser?: Yes — Fraser is part of our regular service area. We cover Fraser, Balwin, Bannerman, Belmont and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.
How long does drywall installation take in an Fraser home?: A standard basement in an Fraser home typically takes one to two days to board. New construction or a big reno in Fraser runs a longer schedule. The Fraser timeline you get at the quote is realistic, not optimistic. In Fraser, finishing usually begins the day after boarding wraps.
Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Fraser. The Fraser wall board butts under the ceiling board and helps carry it. Reversing the sequence leaves Fraser ceiling joints carrying their own weight unsupported — more likely to crack over time. We do not start Fraser walls until the ceiling is done.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Fraser

Drywall installation in Fraser, hung straight and screwed off right