How long does drywall installation take in an Ermineskin home?

A standard basement in an Ermineskin home typically takes one to two days to board. In Ermineskin, a full new build or major renovation stretches the timeline. Honest scheduling in Ermineskin: the quoted timeline is the real one. Taping typically starts next-day on Ermineskin jobs.

What board do you use on exterior basement walls in Edmonton?

Moisture-resistant board covers the Ermineskin foundation walls and the plumbing and laundry zones. Standard 1/2” board on dry Ermineskin interior walls. The Ermineskin suite build: fire-rated 5/8” Type X ceiling, soundproofed party walls. We lock the Ermineskin board spec per surface at quote time.

Do you board legal suites to spec?

Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.

Do you serve Ermineskin on weekends?

Yes — we cover Ermineskin and surrounding communities seven days a week. Call or text ' . emp_phone() . ' for a same-day reply.

Do you stand behind your installation work in Ermineskin?

Yes. We walk the finished Ermineskin boarding with you before we leave, and if something is not right we come back and make it right.

Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Ermineskin. Wall board under ceiling board helps hold the Ermineskin ceiling. Flip the Ermineskin sequence and the ceiling joints go unsupported — cracks follow. The Ermineskin ceiling finishes before any wall boarding starts.

Drywall Installation Ermineskin | New Board

Drywall installation in Ermineskin — right board, right spec, ready to tape

Good drywall installation is what makes a good Ermineskin finish possible — seams on framing, the right screw pattern, board plumb before a single coat of mud goes on. In Ermineskin we board new builds, basements and renovations the way a finishing specialist wants it boarded. Ermineskin is an older Whitemud community where settling cracks, aging texture and the occasional plaster repair come up, so the installation work here is usually settling cracks, aging stipple and the odd plaster repair. We cover Ermineskin, Aspen Gardens, Bearspaw, Blue Quill and Whitemud, 7 days a week.

Ermineskin basement development boarded ceiling-first, then walls
Moisture-resistant board on Ermineskin exterior walls and wet areas
Suite separations in Ermineskin boarded fire-rated and soundproof
Correct screw pattern throughout — all seams on framing
Ermineskin coverage — we come to you
Room additions, garage conversions and flex room boarding
Bulkheads, soffits, archways and ceiling work

What affects the cost of drywall installation in Ermineskin?

Square footage, board type and ceiling complexity in Ermineskin

The cost of drywall installation in Ermineskin comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaulted areas, bulkheads and soffits take longer), plus whether it is new build or reno around Ermineskin fixtures and trades. We measure on site and give you a fixed price before we start.

Board spec for Ermineskin homes — right product on every surface

Not every surface in an Ermineskin home needs the same board. Exterior foundation walls need moisture-resistant. Moisture-resistant board on all Ermineskin bathroom and laundry walls. In Ermineskin, suite ceilings take 5/8” Type X fire-rated. An Ermineskin suite party wall gains from STC soundproof board. In Ermineskin, moisture-free interior walls use standard 1/2” board. Each Ermineskin surface gets its product at the quote, before any inspector flags it.

Our Edmonton drywall installation process, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. No Ermineskin wall board goes up before the ceiling is complete.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Clean, square corners — inside and out — on Ermineskin jobs. We hold Ermineskin board to the window and door frames, no overrun. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

Drywall board types for Edmonton homes

Standard 1/2” drywall — the right choice for most Edmonton walls

Standard 1/2” drywall is correct for interior walls and ceilings in Edmonton homes away from moisture exposure. It is the most common board we install and finishes the same as the rest of the house. Most interior walls and ceilings in Edmonton homes use standard board.

Moisture-resistant, fire-rated and soundproof — where the spec matters

Exterior basement walls need moisture-resistant board even with a vapour barrier. Bathroom and laundry walls need moisture-resistant. Legal suite ceilings require 5/8” Type X fire-rated. The Ermineskin suite party wall is built with STC soundproof board. We specify the right product for each surface before we pull the first sheet.

Our drywall installation process in Ermineskin, step by step

Ceiling board first — always — in Ermineskin homes

Every boarding job in Ermineskin starts with the ceiling. The Ermineskin ceiling boards first so the wall board can butt under and support it. In Ermineskin, skipping the sequence leaves joints carrying their own weight — cracks follow. No Ermineskin wall board goes up before the ceiling is complete. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Ermineskin

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. Seams on framing, not between studs — the Ermineskin standard. Clean, square corners — inside and out — on Ermineskin jobs. We hold Ermineskin board to the window and door frames, no overrun. When the boarding is done in a Ermineskin home, every surface is at the right plane and the taping crew can go straight to work.

Why Ermineskin homeowners trust Emplastrum for drywall installation

Board it right for the finish

Behind every Ermineskin taping problem we have fixed was a boarding problem first. We board every Ermineskin job the way we would want it boarded before we tape it.

Fixed price, same-day reply

We install drywall across Ermineskin and Whitemud, 7 days a week. For Ermineskin homeowners: free quote, fixed number, backed workmanship. Any issue on an Ermineskin boarding job earns a return trip and a proper fix.

What affects the cost of drywall installation in Ermineskin?

Square footage, board type and ceiling complexity in Ermineskin

The cost of drywall installation in Ermineskin comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaults, bulkheads and soffits add time), and new development vs renovation around the existing Ermineskin trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec for Ermineskin homes — right product on every surface

Not every surface in an Ermineskin home needs the same board. Exterior foundation walls need moisture-resistant. In Ermineskin, every bathroom and laundry wall takes moisture-resistant board. An Ermineskin suite ceiling requires 5/8” Type X fire-rated board. In Ermineskin, suite-to-living party walls do better with STC soundproof board. For dry Ermineskin interior walls, standard 1/2” board is right. In Ermineskin, the correct board per surface is set at the quote, not after inspection.

How it works

Simple, clean, on schedule — Drywall Installation in Ermineskin

Free quote

We come out to your Ermineskin property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Ermineskin starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Ermineskin. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Ermineskin home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Ermineskin. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Ermineskin trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Ermineskin.

Read our reviews on Google

FAQ — Drywall Installation Ermineskin

Drywall Installation Ermineskin: your questions answered

How long does drywall installation take in an Ermineskin home?: A standard basement in an Ermineskin home typically takes one to two days to board. In Ermineskin, a full new build or major renovation stretches the timeline. Honest scheduling in Ermineskin: the quoted timeline is the real one. Taping typically starts next-day on Ermineskin jobs.
What board do you use on exterior basement walls in Edmonton?: Moisture-resistant board covers the Ermineskin foundation walls and the plumbing and laundry zones. Standard 1/2” board on dry Ermineskin interior walls. The Ermineskin suite build: fire-rated 5/8” Type X ceiling, soundproofed party walls. We lock the Ermineskin board spec per surface at quote time.
Do you board legal suites to spec?: Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.
Do you serve Ermineskin on weekends?: Yes — we cover Ermineskin and surrounding communities seven days a week. Call or text ' . emp_phone() . ' for a same-day reply.
Do you stand behind your installation work in Ermineskin?: Yes. We walk the finished Ermineskin boarding with you before we leave, and if something is not right we come back and make it right.
Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Ermineskin. Wall board under ceiling board helps hold the Ermineskin ceiling. Flip the Ermineskin sequence and the ceiling joints go unsupported — cracks follow. The Ermineskin ceiling finishes before any wall boarding starts.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Ermineskin

Drywall installation in Ermineskin — right board, right spec, ready to tape