Do you stand behind your installation work in Elmwood?

Yes. Before leaving Elmwood, we walk the boarding together and fix anything not right.

Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Elmwood. In Elmwood, the wall board tucks under the ceiling board to support it. Out of order, Elmwood ceiling joints carry their own weight and crack sooner. In Elmwood, walls wait until the ceiling is boarded.

What board do you use for exterior basement walls in Elmwood?

Moisture-resistant board on all Elmwood exterior foundation walls and around plumbing and laundry. Standard 1/2” board for Elmwood interior walls away from moisture. For Elmwood legal suites: 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify the right product for each Elmwood surface at the on-site quote.

Do you board for legal suites in Elmwood?

Yes, and we know the spec. A legal secondary suite in Elmwood requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. The Elmwood suite is boarded to that spec, and inspection follows.

Do you hang the ceiling board before the walls?

Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.

How long does drywall installation take in a Elmwood home?

A standard basement in a Elmwood home typically takes one to two days to board. In Elmwood, a full new build or major renovation stretches the timeline. Honest scheduling in Elmwood: the quoted timeline is the real one. Taping typically starts next-day on Elmwood jobs.

Drywall Installation Elmwood | New Board

Drywall installation in Elmwood, hung straight and screwed off right

A good Elmwood finish starts with good boarding. In Elmwood the board goes up level, correctly screwed, seams on framing, clean cuts at mechanical and corners. Elmwood is one of Jasper Place’s newest communities — most homes have framed, unfinished basements ready for boarding. We cover Elmwood, Britannia Youngstown, Canora, Crestwood and the surrounding area, 7 days a week.

Fire-rated plus soundproof board on Elmwood suite separations
STC soundproof board on party walls for legal suites
Elmwood legal-suite separations get fire-rated and soundproof board
Correct screw pattern throughout Elmwood — all seams on framing
Tape-ready Elmwood boarding, nothing for the taping crew to fix
Drywall boarding and hanging in Elmwood — new builds and renovations
Basement boarding — ceiling first, walls second

Why Elmwood homeowners call Emplastrum

Fixed price, Level 4 standard, 7 days a week in Elmwood

We give Elmwood homeowners a fixed price at the on-site quote. The number does not change. We tape every joint to Level 4, match every texture precisely and leave the surface paint-ready when we leave.

We cover Elmwood, Britannia Youngstown, Canora, Crestwood and surrounding communities

Free on-site quotes, same-day reply, 7 days a week. Call or text ' . emp_phone() . '.

What affects the cost of drywall installation in Elmwood?

Square footage, board type and ceiling complexity

The cost of drywall installation in Elmwood comes down to the total square footage, the board type (standard, moisture-resistant, fire-rated and soundproof price differently), and whether the job is a new development or a renovation around existing trades. We measure on site and give a fixed price before we start.

Board spec in Elmwood

The work here usually calls for settling cracks, aging stipple and the odd plaster repair. We map every Elmwood surface at the quote and specify the right product so there are no surprises at inspection.

Drywall board types used in Elmwood homes

Standard 1/2” drywall — the right choice for most Elmwood walls

Standard 1/2” drywall is correct for interior walls and ceilings in Elmwood homes away from moisture exposure. It is the most common board we install, finishes the same as the rest of the house and is what most Elmwood walls and ceilings should be. Most interior walls and ceilings in Elmwood homes use standard 1/2” board.

Moisture-resistant, fire-rated and soundproof — where spec matters in Elmwood

Exterior basement walls in Elmwood homes need moisture-resistant board. Elmwood bathrooms and laundry need moisture-resistant board on all walls. Elmwood legal-suite ceilings require 5/8” Type X fire-rated board. Elmwood party walls between a suite and the main living space get STC soundproof board. We specify the right product for each Elmwood surface at the on-site quote so there are no surprises at inspection.

Drywall installation work we do in Elmwood

Full basement boarding in Elmwood homes

The most common boarding call in Elmwood is full basement installation. The builder framed the space; the homeowner is ready to finish it. We hang the ceiling board first — always — then the walls, with moisture-resistant board on all exterior foundation walls. We use the correct screw pattern, land all seams on framing, and cut around mechanical chases and bulkheads cleanly. When the boarding crew leaves an Elmwood basement, the taping crew can start without rework.

Boarding to a premium standard in Elmwood

Elmwood homeowners expect the boarding to match the quality of the rest of the home. We hang board level and flush, use the correct screw pattern throughout, land all seams on framing and cut corners and archways cleanly. The taping crew gets a surface they can work to Level 4 or Level 5 without fighting the boarding behind it.

Why Elmwood homeowners trust Emplastrum for drywall installation

Boarding done right means the finish can be done right in Elmwood

The quality of a Level 4 wall finish starts with the boarding behind it. In Elmwood, off-level board, floating seams or sparse screws hand the taping crew a fight. We board every Elmwood job the way a taping specialist would want it boarded — because we are the taping specialist. When we finish the boarding, we can finish the taping to Level 4 without fighting the installation underneath.

Fixed price, same-day reply, all four Edmonton quadrants, Edmonton, Britannia Youngstown, Canora, Crestwood and Edmonton

We cover all four Edmonton quadrants, Edmonton, Britannia Youngstown, Canora, Crestwood and Edmonton, 7 days a week — Elmwood, Britannia Youngstown, Canora, Crestwood and every community in between. The Elmwood number is set before we start and stays set on site.

What affects the cost of drywall installation in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Elmwood wet rooms — bath and laundry — get moisture board throughout. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. Standard 1/2” suits Elmwood interior walls clear of moisture. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

How it works

Simple, clean, on schedule — Drywall Installation in Elmwood

Free quote

We come out to your Elmwood property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Elmwood starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Elmwood. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Elmwood home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Elmwood. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Elmwood trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Elmwood.

Read our reviews on Google

FAQ — Drywall Installation Elmwood

Drywall Installation Elmwood: your questions answered

Do you stand behind your installation work in Elmwood?: Yes. Before leaving Elmwood, we walk the boarding together and fix anything not right.
Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Elmwood. In Elmwood, the wall board tucks under the ceiling board to support it. Out of order, Elmwood ceiling joints carry their own weight and crack sooner. In Elmwood, walls wait until the ceiling is boarded.
What board do you use for exterior basement walls in Elmwood?: Moisture-resistant board on all Elmwood exterior foundation walls and around plumbing and laundry. Standard 1/2” board for Elmwood interior walls away from moisture. For Elmwood legal suites: 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify the right product for each Elmwood surface at the on-site quote.
Do you board for legal suites in Elmwood?: Yes, and we know the spec. A legal secondary suite in Elmwood requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. The Elmwood suite is boarded to that spec, and inspection follows.
Do you hang the ceiling board before the walls?: Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.
How long does drywall installation take in a Elmwood home?: A standard basement in a Elmwood home typically takes one to two days to board. In Elmwood, a full new build or major renovation stretches the timeline. Honest scheduling in Elmwood: the quoted timeline is the real one. Taping typically starts next-day on Elmwood jobs.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Elmwood

Drywall installation in Elmwood, hung straight and screwed off right