Do you board for legal suites in Delwood?

Yes, and we know the spec. A legal secondary suite in Delwood requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Delwood suites board and pass inspection.

How long does drywall installation take in an Delwood home?

A standard basement in an Delwood home typically takes one to two days to board. A full Delwood new-build or a larger renovation takes longer. We give Delwood homeowners a realistic timeline at the on-site quote. The Delwood taping crew can usually start the day after boarding is complete.

Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Delwood. The Delwood ceiling board is carried in part by the wall board butting under it. In Delwood, reversing the boarding order leaves ceiling joints unsupported and prone to cracking. No Delwood wall board goes up before the ceiling is complete.

Do you board for legal suites in Edmonton?

Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.

For Delwood exterior basement walls, what board do you use?

In Delwood, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Delwood home.

How long does drywall installation take in an Delwood home?

Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Delwood are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.

Drywall Installation Delwood | New Board

Drywall installation hung straight and screwed off right

In Delwood, the install sets up the finish. Level hanging, right screws, framed seams and clean mechanical/corner cuts — the Delwood standard. Delwood is one of Edmonton’s oldest communities. Renovation boarding in homes from the 1950s, 1960s and 1970s is the most common installation work here. We cover Delwood, Balwin, Bannerman, Belmont and the surrounding area, 7 days a week.

Fire-rated and soundproof board for Delwood legal-suite separations
In Delwood, correct screw spacing and seams on framing throughout
Bulkheads, soffits, archways and vaulted ceiling work
No rework in Delwood: tape-ready boarding when we go
Left ready for taper — no rework needed
Delwood boarding left tape-ready, no rework for the finishers
Delwood basements boarded in order: ceiling, then walls

Why Delwood homeowners trust Emplastrum for drywall installation

Board it right for the finish

Behind every Delwood taping problem we have fixed was a boarding problem first. We board every Delwood job the way we would want it boarded before we tape it.

Fixed price, same-day reply

We install drywall across Delwood and Northeast, 7 days a week. For Delwood homeowners: free quote, fixed number, backed workmanship. Any issue on an Delwood boarding job earns a return trip and a proper fix.

What affects the cost of drywall installation in Delwood?

Square footage, board type and ceiling complexity in Delwood

The cost of drywall installation in Delwood comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaults, bulkheads and soffits add time), and new development vs renovation around the existing Delwood trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec for Delwood homes — right product on every surface

Not every surface in an Delwood home needs the same board. Exterior foundation walls need moisture-resistant. In Delwood, every bathroom and laundry wall takes moisture-resistant board. An Delwood suite ceiling requires 5/8” Type X fire-rated board. In Delwood, suite-to-living party walls do better with STC soundproof board. For dry Delwood interior walls, standard 1/2” board is right. In Delwood, the correct board per surface is set at the quote, not after inspection.

Our Delwood drywall installation process, step by step

Ceiling board first, always

Every boarding job in Delwood starts with the ceiling, because the wall board butts up under it and helps carry it. Reversing the sequence leaves Delwood ceiling joints unsupported and more likely to crack later.

Wall boarding, screw pattern and seams

Wall board goes up with the correct screw pattern and every seam lands on framing. When the Delwood boarding is done, the taping crew can start immediately with no rework.

Drywall installation work we do in Delwood

Room addition and partition boarding in Delwood homes

Delwood homes from the late 1980s and 1990s are at the age where homeowners are adding partitions, converting rooms and opening up floor plans. New walls go up and existing rooms get reboarded when layouts change. We hang standard 1/2” board on all new partition walls, confirm the framing is square before we start and leave the new walls ready for the taping crew. Board seams land on studs, corners are clean and nothing is proud of the adjacent surface.

Water damage reboarding in Delwood

Water damage in Delwood homes from the late 1980s and 1990s is one of the most common boarding calls we get. A bathroom leak, a roof problem or a burst pipe means the affected board comes out and new board goes up on the exposed framing. We assess what needs to come down, remove only what is damaged, re-board to match the existing surface height and leave the wall ready for taping.

Why Delwood homeowners trust Emplastrum for drywall installation

Boarding done right means the finish can be done right in Delwood

The quality of a Level 4 wall finish starts with the boarding behind it. Poorly hung Delwood board — not level, seams mid-bay, screws too far — fights the finish. We board every Delwood job the way a taping specialist would want it boarded — because we are the taping specialist. When we finish the boarding, we can finish the taping to Level 4 without fighting the installation underneath.

Fixed price, same-day reply, all four Edmonton quadrants, Edmonton, Balwin, Bannerman, Belmont and Edmonton

We cover all four Edmonton quadrants, Edmonton, Balwin, Bannerman, Belmont and Edmonton, 7 days a week — Delwood, Balwin, Bannerman, Belmont and every community in between. Fixed Delwood pricing means the pre-start figure survives arrival.

What affects the cost of drywall installation in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Delwood bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Delwood, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

How it works

Simple, clean, on schedule — Drywall Installation in Delwood

Free quote

We come out to your Delwood property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Delwood starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Delwood. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Delwood home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Delwood. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Delwood trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Delwood.

Read our reviews on Google

FAQ — Drywall Installation Delwood

Drywall Installation Delwood: your questions answered

Do you board for legal suites in Delwood?: Yes, and we know the spec. A legal secondary suite in Delwood requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Delwood suites board and pass inspection.
How long does drywall installation take in an Delwood home?: A standard basement in an Delwood home typically takes one to two days to board. A full Delwood new-build or a larger renovation takes longer. We give Delwood homeowners a realistic timeline at the on-site quote. The Delwood taping crew can usually start the day after boarding is complete.
Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Delwood. The Delwood ceiling board is carried in part by the wall board butting under it. In Delwood, reversing the boarding order leaves ceiling joints unsupported and prone to cracking. No Delwood wall board goes up before the ceiling is complete.
Do you board for legal suites in Edmonton?: Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.
For Delwood exterior basement walls, what board do you use?: In Delwood, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Delwood home.
How long does drywall installation take in an Delwood home?: Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Delwood are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Delwood

Drywall installation hung straight and screwed off right