What board do you use for exterior basement walls in Cy Becker?

Moisture-resistant board covers the Cy Becker foundation walls and the plumbing and laundry zones. Standard 1/2” board on dry Cy Becker interior walls. The Cy Becker suite build: fire-rated 5/8” Type X ceiling, soundproofed party walls. We lock the Cy Becker board spec per surface at quote time.

Do you board for legal suites in Cy Becker?

Yes, and we know the spec. A legal secondary suite in Cy Becker requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. Boarding to spec is why Cy Becker suite installs clear inspection.

How long does drywall installation take in a Edmonton home?

A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. At the Cy Becker quote you get the true install timeline. The taping crew can usually start the next day.

Does Cy Becker taping follow straight after boarding?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Cy Becker.

What board do you use for exterior basement walls in Cy Becker?

Every Cy Becker foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Cy Becker interior walls away from moisture take standard 1/2” board. Cy Becker suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Cy Becker surface is set at the on-site quote.

Do you do drywall installation in Cy Becker?

Yes — Cy Becker is part of our regular service area. We cover Cy Becker, Ambleton, Balwin, Bannerman, Belmont and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.

Drywall Installation Cy Becker | New Board

Drywall installation in Cy Becker, hung straight and screwed off right

A good Cy Becker finish starts with good boarding. In Cy Becker the board goes up level, correctly screwed, seams on framing, clean cuts at mechanical and corners. Cy Becker is one of Northeast’s newest communities — most homes have framed, unfinished basements ready for boarding. We cover Cy Becker, East Hills, Applewood and Edmonton and the surrounding area, 7 days a week.

Fire-rated 5/8” Type X on suite ceilings where required
Cy Becker exterior walls and wet areas get moisture-resistant board
Fire-rated and soundproof board for Cy Becker legal-suite separations
In Cy Becker, correct screw spacing and seams on framing throughout
Bulkheads, soffits, archways and vaulted ceiling work
No rework in Cy Becker: tape-ready boarding when we go
Left ready for taper — no rework needed

Why Cy Becker homeowners trust Emplastrum for drywall installation

Boarding done right means the finish can be done right in Cy Becker

The quality of a Level 4 wall finish starts with the boarding behind it. Board in Cy Becker that is not level, has seams mid-field or screws too far apart creates problems the taping crew has to fight. We board every Cy Becker job the way a taping specialist would want it boarded — because we are the taping specialist. When we finish the boarding, we can finish the taping to Level 4 without fighting the installation underneath.

Fixed price, same-day reply, all four Edmonton quadrants, Edmonton, Balwin, Bannerman, Belmont and Edmonton

We cover all four Edmonton quadrants, Edmonton, Balwin, Bannerman, Belmont and Edmonton, 7 days a week — Cy Becker, Balwin, Bannerman, Belmont and every community in between. Free on-site Cy Becker quotes, fixed prices — the number you get before we start does not change on site.

What affects the cost of drywall installation in Cy Becker?

Square footage, board type and ceiling complexity in Cy Becker

The cost of drywall installation in Cy Becker comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaulted areas, bulkheads and soffits take longer), plus whether it is new build or reno around Cy Becker fixtures and trades. We measure on site and give you a fixed price before we start.

Board spec for Cy Becker homes — right product on every surface

Not every surface in an Cy Becker home needs the same board. Exterior foundation walls need moisture-resistant. Moisture-resistant board on all Cy Becker bathroom and laundry walls. In Cy Becker, suite ceilings take 5/8” Type X fire-rated. An Cy Becker suite party wall gains from STC soundproof board. In Cy Becker, moisture-free interior walls use standard 1/2” board. Each Cy Becker surface gets its product at the quote, before any inspector flags it.

Our Edmonton drywall installation process, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. No Cy Becker wall board goes up before the ceiling is complete.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Clean, square corners — inside and out — on Cy Becker jobs. We hold Cy Becker board to the window and door frames, no overrun. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

Drywall board types for Edmonton homes

Standard 1/2” drywall — the right choice for most Edmonton walls

Standard 1/2” drywall is correct for interior walls and ceilings in Edmonton homes away from moisture exposure. It is the most common board we install and finishes the same as the rest of the house. Most interior walls and ceilings in Edmonton homes use standard board.

Moisture-resistant, fire-rated and soundproof — where the spec matters

Exterior basement walls need moisture-resistant board even with a vapour barrier. Bathroom and laundry walls need moisture-resistant. Legal suite ceilings require 5/8” Type X fire-rated. The Cy Becker suite party wall is built with STC soundproof board. We specify the right product for each surface before we pull the first sheet.

Our drywall installation process in Cy Becker, step by step

Ceiling board first — always — in Cy Becker homes

Every boarding job in Cy Becker starts with the ceiling. The Cy Becker ceiling boards first so the wall board can butt under and support it. In Cy Becker, skipping the sequence leaves joints carrying their own weight — cracks follow. No Cy Becker wall board goes up before the ceiling is complete. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Cy Becker

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. Seams on framing, not between studs — the Cy Becker standard. Clean, square corners — inside and out — on Cy Becker jobs. We hold Cy Becker board to the window and door frames, no overrun. When the boarding is done in a Cy Becker home, every surface is at the right plane and the taping crew can go straight to work.

Why Cy Becker homeowners trust Emplastrum for drywall installation

Board it right for the finish

Behind every Cy Becker taping problem we have fixed was a boarding problem first. We board every Cy Becker job the way we would want it boarded before we tape it.

Fixed price, same-day reply

We install drywall across Cy Becker and Northeast, 7 days a week. For Cy Becker homeowners: free quote, fixed number, backed workmanship. Any issue on an Cy Becker boarding job earns a return trip and a proper fix.

How it works

Simple, clean, on schedule — Drywall Installation in Cy Becker

Free quote

We come out to your Cy Becker property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Cy Becker starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Cy Becker. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Cy Becker home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Cy Becker. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Cy Becker trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Cy Becker.

Read our reviews on Google

FAQ — Drywall Installation Cy Becker

Drywall Installation Cy Becker: your questions answered

What board do you use for exterior basement walls in Cy Becker?: Moisture-resistant board covers the Cy Becker foundation walls and the plumbing and laundry zones. Standard 1/2” board on dry Cy Becker interior walls. The Cy Becker suite build: fire-rated 5/8” Type X ceiling, soundproofed party walls. We lock the Cy Becker board spec per surface at quote time.
Do you board for legal suites in Cy Becker?: Yes, and we know the spec. A legal secondary suite in Cy Becker requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. Boarding to spec is why Cy Becker suite installs clear inspection.
How long does drywall installation take in a Edmonton home?: A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. At the Cy Becker quote you get the true install timeline. The taping crew can usually start the next day.
Does Cy Becker taping follow straight after boarding?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Cy Becker.
What board do you use for exterior basement walls in Cy Becker?: Every Cy Becker foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Cy Becker interior walls away from moisture take standard 1/2” board. Cy Becker suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Cy Becker surface is set at the on-site quote.
Do you do drywall installation in Cy Becker?: Yes — Cy Becker is part of our regular service area. We cover Cy Becker, Ambleton, Balwin, Bannerman, Belmont and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Cy Becker

Drywall installation in Cy Becker, hung straight and screwed off right