Is drywall installation in Cloverdale a fixed price?

Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.

Do you board for legal suites in Cloverdale?

Yes, and we know the spec. A legal secondary suite in Cloverdale requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Cloverdale suites board and pass inspection.

How long does drywall installation take in an Cloverdale home?

A standard basement in an Cloverdale home typically takes one to two days to board. A full Cloverdale new-build or a larger renovation takes longer. We give Cloverdale homeowners a realistic timeline at the on-site quote. The Cloverdale taping crew can usually start the day after boarding is complete.

Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Cloverdale. The Cloverdale ceiling board is carried in part by the wall board butting under it. In Cloverdale, reversing the boarding order leaves ceiling joints unsupported and prone to cracking. No Cloverdale wall board goes up before the ceiling is complete.

Do you board for legal suites in Edmonton?

Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.

For Cloverdale exterior basement walls, what board do you use?

In Cloverdale, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Cloverdale home.

Drywall Installation Cloverdale | New Board

Drywall installation in Cloverdale — right board, right spec, ready to tape

In Cloverdale, the finish rides on the install — seams on framing, right screw pattern, board plumb pre-mud. In Cloverdale we board new builds, basements and renovations the way a finishing specialist wants it boarded. Cloverdale is this established Southeast community where reno, repair and ceiling drywall are common, so the installation work here is usually settling cracks, nail pops and tired texture. We cover Cloverdale, Avonmore, Bonnie Doon, Capilano and Southeast, 7 days a week.

Bulkheads, soffits, archways and vaulted ceiling work
No rework in Cloverdale: tape-ready boarding when we go
Left ready for taper — no rework needed
Cloverdale boarding left tape-ready, no rework for the finishers
Cloverdale basements boarded in order: ceiling, then walls
No rework in Cloverdale — the board is ready for tape when we go
Fire-rated plus soundproof board on Cloverdale suite separations

Drywall board types for Edmonton homes

Standard 1/2” drywall — the right choice for most Edmonton walls

Standard 1/2” drywall is correct for interior walls and ceilings in Edmonton homes away from moisture exposure. It is the most common board we install and finishes the same as the rest of the house. Most interior walls and ceilings in Edmonton homes use standard board.

Moisture-resistant, fire-rated and soundproof — where the spec matters

Exterior basement walls need moisture-resistant board even with a vapour barrier. Bathroom and laundry walls need moisture-resistant. Legal suite ceilings require 5/8” Type X fire-rated. The Cloverdale suite party wall is built with STC soundproof board. We specify the right product for each surface before we pull the first sheet.

Our drywall installation process in Cloverdale, step by step

Ceiling board first — always — in Cloverdale homes

Every boarding job in Cloverdale starts with the ceiling. The Cloverdale ceiling boards first so the wall board can butt under and support it. In Cloverdale, skipping the sequence leaves joints carrying their own weight — cracks follow. No Cloverdale wall board goes up before the ceiling is complete. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Cloverdale

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. Seams on framing, not between studs — the Cloverdale standard. Clean, square corners — inside and out — on Cloverdale jobs. We hold Cloverdale board to the window and door frames, no overrun. When the boarding is done in a Cloverdale home, every surface is at the right plane and the taping crew can go straight to work.

Why Cloverdale homeowners trust Emplastrum for drywall installation

Board it right for the finish

Behind every Cloverdale taping problem we have fixed was a boarding problem first. We board every Cloverdale job the way we would want it boarded before we tape it.

Fixed price, same-day reply

We install drywall across Cloverdale and Southeast, 7 days a week. For Cloverdale homeowners: free quote, fixed number, backed workmanship. Any issue on an Cloverdale boarding job earns a return trip and a proper fix.

What affects the cost of drywall installation in Cloverdale?

Square footage, board type and ceiling complexity in Cloverdale

The cost of drywall installation in Cloverdale comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaults, bulkheads and soffits add time), and new development vs renovation around the existing Cloverdale trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec for Cloverdale homes — right product on every surface

Not every surface in an Cloverdale home needs the same board. Exterior foundation walls need moisture-resistant. In Cloverdale, every bathroom and laundry wall takes moisture-resistant board. An Cloverdale suite ceiling requires 5/8” Type X fire-rated board. In Cloverdale, suite-to-living party walls do better with STC soundproof board. For dry Cloverdale interior walls, standard 1/2” board is right. In Cloverdale, the correct board per surface is set at the quote, not after inspection.

Our Cloverdale drywall installation process, step by step

Ceiling board first, always

Every boarding job in Cloverdale starts with the ceiling, because the wall board butts up under it and helps carry it. Reversing the sequence leaves Cloverdale ceiling joints unsupported and more likely to crack later.

Wall boarding, screw pattern and seams

Wall board goes up with the correct screw pattern and every seam lands on framing. When the Cloverdale boarding is done, the taping crew can start immediately with no rework.

Drywall installation work we do in Cloverdale

Room addition and partition boarding in Cloverdale homes

Cloverdale homes from the late 1980s and 1990s are at the age where homeowners are adding partitions, converting rooms and opening up floor plans. New walls go up and existing rooms get reboarded when layouts change. We hang standard 1/2” board on all new partition walls, confirm the framing is square before we start and leave the new walls ready for the taping crew. Board seams land on studs, corners are clean and nothing is proud of the adjacent surface.

Water damage reboarding in Cloverdale

Water damage in Cloverdale homes from the late 1980s and 1990s is one of the most common boarding calls we get. A bathroom leak, a roof problem or a burst pipe means the affected board comes out and new board goes up on the exposed framing. We assess what needs to come down, remove only what is damaged, re-board to match the existing surface height and leave the wall ready for taping.

How it works

Simple, clean, on schedule — Drywall Installation in Cloverdale

Free quote

We come out to your Cloverdale property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Cloverdale starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Cloverdale. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Cloverdale home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Cloverdale. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Cloverdale trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Cloverdale.

Read our reviews on Google

FAQ — Drywall Installation Cloverdale

Drywall Installation Cloverdale: your questions answered

Is drywall installation in Cloverdale a fixed price?: Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.
Do you board for legal suites in Cloverdale?: Yes, and we know the spec. A legal secondary suite in Cloverdale requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Cloverdale suites board and pass inspection.
How long does drywall installation take in an Cloverdale home?: A standard basement in an Cloverdale home typically takes one to two days to board. A full Cloverdale new-build or a larger renovation takes longer. We give Cloverdale homeowners a realistic timeline at the on-site quote. The Cloverdale taping crew can usually start the day after boarding is complete.
Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Cloverdale. The Cloverdale ceiling board is carried in part by the wall board butting under it. In Cloverdale, reversing the boarding order leaves ceiling joints unsupported and prone to cracking. No Cloverdale wall board goes up before the ceiling is complete.
Do you board for legal suites in Edmonton?: Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.
For Cloverdale exterior basement walls, what board do you use?: In Cloverdale, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Cloverdale home.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Cloverdale

Drywall installation in Cloverdale — right board, right spec, ready to tape