What board do you use for exterior basement walls in Charlesworth?

In Charlesworth, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Charlesworth interior walls get standard 1/2” board. Legal suites in Charlesworth take 5/8” Type X on the ceiling and soundproof party walls. Each Charlesworth surface gets its board product confirmed at the quote.

How long does drywall installation take in a Edmonton home?

A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Charlesworth: the quoted timeline is the real one. The taping crew can usually start the next day.

Do you do drywall installation in Charlesworth?

Yes — Charlesworth is part of our regular service area, and we are usually booked within the week. We also cover Decoteau, Ellerslie, Summerside and Ellerslie.

How do you handle texture matching after drywall installation work in Charlesworth?

Texture matching is part of every repair and patch job we do in Charlesworth. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.

What board do you use on Charlesworth exterior basement walls?

Moisture-resistant board on all Charlesworth exterior foundation walls and around plumbing and laundry. Standard 1/2-inch board for interior walls away from moisture in your Charlesworth home.

Do you board for legal suites in Charlesworth?

Yes, and we know the spec. A legal secondary suite in Charlesworth requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. We board Charlesworth suites to that spec so the installation passes inspection.

Drywall Installation Charlesworth | New Board

Drywall installation in Charlesworth — right board, right spec, ready to tape

In Charlesworth, the install sets up the finish. Level hanging, right screws, framed seams and clean mechanical/corner cuts — the Charlesworth standard. Charlesworth is one of Edmonton’s oldest communities. Renovation boarding in homes from the 1950s, 1960s and 1970s is the most common installation work here. We cover Charlesworth, Decoteau, Ellerslie, Summerside and the surrounding area, 7 days a week.

Moisture-resistant board on exterior foundation walls and wet areas
Charlesworth basement development boarded ceiling-first, then walls
Moisture-resistant board on Charlesworth exterior walls and wet areas
Suite separations in Charlesworth boarded fire-rated and soundproof
Correct screw pattern throughout — all seams on framing
Charlesworth coverage — we come to you
Room additions, garage conversions and flex room boarding

Our drywall installation process in Charlesworth, step by step

Ceiling board first — always — in Charlesworth homes

Every boarding job in Charlesworth starts with the ceiling. The Charlesworth ceiling boards first so the wall board can butt under and support it. In Charlesworth, skipping the sequence leaves joints carrying their own weight — cracks follow. No Charlesworth wall board goes up before the ceiling is complete. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Charlesworth

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. Seams on framing, not between studs — the Charlesworth standard. Clean, square corners — inside and out — on Charlesworth jobs. We hold Charlesworth board to the window and door frames, no overrun. When the boarding is done in a Charlesworth home, every surface is at the right plane and the taping crew can go straight to work.

Why Charlesworth homeowners trust Emplastrum for drywall installation

Board it right for the finish

Behind every Charlesworth taping problem we have fixed was a boarding problem first. We board every Charlesworth job the way we would want it boarded before we tape it.

Fixed price, same-day reply

We install drywall across Charlesworth and Ellerslie, 7 days a week. For Charlesworth homeowners: free quote, fixed number, backed workmanship. Any issue on an Charlesworth boarding job earns a return trip and a proper fix.

What affects the cost of drywall installation in Charlesworth?

Square footage, board type and ceiling complexity in Charlesworth

The cost of drywall installation in Charlesworth comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaults, bulkheads and soffits add time), and new development vs renovation around the existing Charlesworth trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec for Charlesworth homes — right product on every surface

Not every surface in an Charlesworth home needs the same board. Exterior foundation walls need moisture-resistant. In Charlesworth, every bathroom and laundry wall takes moisture-resistant board. An Charlesworth suite ceiling requires 5/8” Type X fire-rated board. In Charlesworth, suite-to-living party walls do better with STC soundproof board. For dry Charlesworth interior walls, standard 1/2” board is right. In Charlesworth, the correct board per surface is set at the quote, not after inspection.

Our Charlesworth drywall installation process, step by step

Ceiling board first, always

Every boarding job in Charlesworth starts with the ceiling, because the wall board butts up under it and helps carry it. Reversing the sequence leaves Charlesworth ceiling joints unsupported and more likely to crack later.

Wall boarding, screw pattern and seams

Wall board goes up with the correct screw pattern and every seam lands on framing. When the Charlesworth boarding is done, the taping crew can start immediately with no rework.

Drywall installation work we do in Charlesworth

Room addition and partition boarding in Charlesworth homes

Charlesworth homes from the late 1980s and 1990s are at the age where homeowners are adding partitions, converting rooms and opening up floor plans. New walls go up and existing rooms get reboarded when layouts change. We hang standard 1/2” board on all new partition walls, confirm the framing is square before we start and leave the new walls ready for the taping crew. Board seams land on studs, corners are clean and nothing is proud of the adjacent surface.

Water damage reboarding in Charlesworth

Water damage in Charlesworth homes from the late 1980s and 1990s is one of the most common boarding calls we get. A bathroom leak, a roof problem or a burst pipe means the affected board comes out and new board goes up on the exposed framing. We assess what needs to come down, remove only what is damaged, re-board to match the existing surface height and leave the wall ready for taping.

Why Charlesworth homeowners trust Emplastrum for drywall installation

Boarding done right means the finish can be done right in Charlesworth

The quality of a Level 4 wall finish starts with the boarding behind it. Poorly hung Charlesworth board — not level, seams mid-bay, screws too far — fights the finish. We board every Charlesworth job the way a taping specialist would want it boarded — because we are the taping specialist. When we finish the boarding, we can finish the taping to Level 4 without fighting the installation underneath.

Fixed price, same-day reply, all four Edmonton quadrants, Edmonton, Decoteau, Ellerslie, Summerside and Edmonton

We cover all four Edmonton quadrants, Edmonton, Decoteau, Ellerslie, Summerside and Edmonton, 7 days a week — Charlesworth, Decoteau, Ellerslie, Summerside and every community in between. Fixed Charlesworth pricing means the pre-start figure survives arrival.

How it works

Simple, clean, on schedule — Drywall Installation in Charlesworth

Free quote

We come out to your Charlesworth property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Charlesworth starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Charlesworth. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Charlesworth home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Charlesworth. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Charlesworth trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Charlesworth.

Read our reviews on Google

FAQ — Drywall Installation Charlesworth

Drywall Installation Charlesworth: your questions answered

What board do you use for exterior basement walls in Charlesworth?: In Charlesworth, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Charlesworth interior walls get standard 1/2” board. Legal suites in Charlesworth take 5/8” Type X on the ceiling and soundproof party walls. Each Charlesworth surface gets its board product confirmed at the quote.
How long does drywall installation take in a Edmonton home?: A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Charlesworth: the quoted timeline is the real one. The taping crew can usually start the next day.
Do you do drywall installation in Charlesworth?: Yes — Charlesworth is part of our regular service area, and we are usually booked within the week. We also cover Decoteau, Ellerslie, Summerside and Ellerslie.
How do you handle texture matching after drywall installation work in Charlesworth?: Texture matching is part of every repair and patch job we do in Charlesworth. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.
What board do you use on Charlesworth exterior basement walls?: Moisture-resistant board on all Charlesworth exterior foundation walls and around plumbing and laundry. Standard 1/2-inch board for interior walls away from moisture in your Charlesworth home.
Do you board for legal suites in Charlesworth?: Yes, and we know the spec. A legal secondary suite in Charlesworth requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. We board Charlesworth suites to that spec so the installation passes inspection.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Charlesworth

Drywall installation in Charlesworth — right board, right spec, ready to tape