How long does drywall installation take in an Carlton home?

Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Carlton are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.

Can the taping crew start right after you board an Carlton home?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Carlton.

What board do you use for exterior basement walls in Carlton?

Moisture-resistant board covers the Carlton foundation walls and the plumbing and laundry zones. Standard 1/2” board on dry Carlton interior walls. The Carlton suite build: fire-rated 5/8” Type X ceiling, soundproofed party walls. We lock the Carlton board spec per surface at quote time.

Do you board for legal suites in Carlton?

Yes, and we know the spec. A legal secondary suite in Carlton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. Boarding to spec is why Carlton suite installs clear inspection.

How long does drywall installation take in a Edmonton home?

A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. At the Carlton quote you get the true install timeline. The taping crew can usually start the next day.

Does Carlton taping follow straight after boarding?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Carlton.

Drywall Installation Carlton | New Board

Drywall installation in Carlton — right board, right spec, ready to tape

Good drywall installation is what makes a good Carlton finish possible. We hang Carlton board level, use the correct screw pattern, land all seams on framing and cut around mechanical and corners cleanly. Carlton homes from the late 1980s and 1990s are at the age where renovation room additions and water damage reboarding are the most common boarding calls. We cover Carlton, Albany, Athlone, Baranow and the surrounding area, 7 days a week.

Moisture-resistant board for Carlton exterior and wet-area walls
Fire-rated 5/8” Type X on suite ceilings where required
Carlton exterior walls and wet areas get moisture-resistant board
Fire-rated and soundproof board for Carlton legal-suite separations
In Carlton, correct screw spacing and seams on framing throughout
Bulkheads, soffits, archways and vaulted ceiling work
No rework in Carlton: tape-ready boarding when we go

Drywall board types used in Carlton homes

Standard 1/2” drywall — the right choice for most Carlton walls

Standard 1/2” drywall is correct for interior walls and ceilings in Carlton homes away from moisture exposure. It is the most common board we install, finishes the same as the rest of the house and is what most Carlton walls and ceilings should be. Most interior walls and ceilings in Carlton homes use standard 1/2” board.

Moisture-resistant, fire-rated and soundproof — where spec matters in Carlton

Exterior basement walls in Carlton homes need moisture-resistant board. In Carlton, every bathroom and laundry wall takes moisture-resistant board. A Carlton suite ceiling must carry 5/8” Type X fire-rated board. In Carlton, the suite-to-main party wall takes STC soundproof board. The right board per Carlton surface is set at the quote for a clean inspection.

Carlton drywall in context

About Carlton

Carlton is named after Fort Carlton There are several natural areas within the neighbourhood, including a woodlot containing indigenous species located in the northwestern portion of the neighbourhood.

What we see in Carlton

In Carlton the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

Our Carlton drywall installation process, step by step

Ceiling board first, always

Every boarding job in Carlton starts with the ceiling, because the wall board butts up under it and helps carry it. In Carlton, reversing the order under-supports the joints.

Wall board and seams

Walls go up with correct screws and framed seams. In Carlton, completed boarding hands straight to taping with nothing to fix.

Types of Drywall Installation work in Carlton

New installs, renovation work and repair in Carlton

We handle the full range of drywall installation work in Carlton — from brand-new basement boarding and taping to single-room renovation patches and targeted repair work. Every job gets the same Level 4 standard and fixed price commitment.

Legal suites and multi-use spaces in Carlton

Legal suite work in Carlton requires specific board specs: fire-rated on the suite ceiling, soundproof on party walls, moisture-resistant in wet areas. We confirm the spec before we start and board to it.

Drywall installation work we do in Carlton

New development boarding in Carlton — basement and flex rooms

Carlton homeowners finishing new development basements call us to do the boarding before the taping crew. We hang ceiling board first, wall board second, with moisture-resistant on exterior foundation walls and any wall adjacent to plumbing rough-in. We cut bulkheads cleanly, use the correct screw pattern throughout and leave the space ready for taping. No re-work — the taper can start the day after we finish.

Legal suite boarding to spec in Carlton

With strong rental demand in the Carlton area, secondary suite boarding calls are among the most consistent installation jobs we do. We board to the Edmonton spec — 5/8” Type X fire-rated on the suite ceiling, STC soundproof on party walls, moisture-resistant in wet areas — and leave an inspection-ready installation. Fixed price, specified at the on-site quote.

What affects the cost of drywall installation in Carlton?

Square footage, board type and ceiling complexity in Carlton

The cost of drywall installation in Carlton comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaulted ceilings, bulkheads and soffits add time), and whether the job is a new development or a renovation around existing Carlton trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec for Carlton homes — right product on every surface

Not every surface in an Carlton home needs the same board. Exterior foundation walls need moisture-resistant. Carlton bathrooms and laundry need moisture-resistant board on all walls. Carlton legal-suite ceilings need 5/8” Type X fire-rated. Carlton party walls between a suite and living space benefit from STC soundproof board. Standard 1/2” board is correct for Carlton interior walls away from moisture. We specify the right product for each Carlton surface at the on-site quote — not after the inspector flags it.

Our drywall installation process in Carlton, step by step

Ceiling board first — always — in Carlton homes

Every boarding job in Carlton starts with the ceiling. Ceilings before walls in Carlton: the walls butt under the ceiling board and hold it. Miss the Carlton sequence and unsupported ceiling joints crack over time. The Carlton ceiling finishes before any wall boarding starts. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Carlton

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. No Carlton seam falls between studs; all land on framing. Carlton corners, inside and outside, come out square and clean. Board never runs past the openings on Carlton jobs. When the boarding is done in an Carlton home, every surface is at the right plane and the taping crew can go straight to work.

How it works

Simple, clean, on schedule — Drywall Installation in Carlton

Free quote

We come out to your Carlton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Carlton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Carlton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Carlton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Carlton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Carlton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Carlton.

Read our reviews on Google

FAQ — Drywall Installation Carlton

Drywall Installation Carlton: your questions answered

How long does drywall installation take in an Carlton home?: Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Carlton are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.
Can the taping crew start right after you board an Carlton home?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Carlton.
What board do you use for exterior basement walls in Carlton?: Moisture-resistant board covers the Carlton foundation walls and the plumbing and laundry zones. Standard 1/2” board on dry Carlton interior walls. The Carlton suite build: fire-rated 5/8” Type X ceiling, soundproofed party walls. We lock the Carlton board spec per surface at quote time.
Do you board for legal suites in Carlton?: Yes, and we know the spec. A legal secondary suite in Carlton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. Boarding to spec is why Carlton suite installs clear inspection.
How long does drywall installation take in a Edmonton home?: A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. At the Carlton quote you get the true install timeline. The taping crew can usually start the next day.
Does Carlton taping follow straight after boarding?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Carlton.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Carlton

Drywall installation in Carlton &mdash; right board, right spec, ready to tape