How long does drywall installation take in a Edmonton home?

A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Calder: the quoted timeline is the real one. The taping crew can usually start the next day.

Do you do drywall installation in Calder?

Yes — Calder is part of our regular service area, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.

How do you handle texture matching after drywall installation work in Calder?

Texture matching is part of every repair and patch job we do in Calder. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.

What board do you use on Calder exterior basement walls?

Moisture-resistant board on all Calder exterior foundation walls and around plumbing and laundry. Standard 1/2-inch board for interior walls away from moisture in your Calder home.

Do you board for legal suites in Calder?

Yes, and we know the spec. A legal secondary suite in Calder requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. We board Calder suites to that spec so the installation passes inspection.

How long does drywall installation take in an Calder home?

A standard basement in an Calder home typically takes one to two days to board. In Calder, a full new build or major renovation stretches the timeline. Honest scheduling in Calder: the quoted timeline is the real one. Taping typically starts next-day on Calder jobs.

Drywall Installation Calder | New Board

Drywall installation in Calder — hung straight, screwed off right

In Calder, the install sets up the finish. Level hanging, right screws, framed seams and clean mechanical/corner cuts — the Calder standard. Calder homes from the 2000s and 2010s were built with framed, unfinished basements. Full basement boarding is the most common installation call here. We cover Calder, Albany, Athlone, Baranow and the surrounding area, 7 days a week.

Calder boarding left tape-ready, no rework for the finishers
Calder basements boarded in order: ceiling, then walls
No rework in Calder — the board is ready for tape when we go
Fire-rated plus soundproof board on Calder suite separations
STC soundproof board on party walls for legal suites
Calder legal-suite separations get fire-rated and soundproof board
Correct screw pattern throughout Calder — all seams on framing

Drywall installation work we do in Calder

Full basement boarding in Calder homes

The most common boarding call in Calder is full basement installation. The builder framed the space; the homeowner is ready to finish it. We hang the ceiling board first — always — then the walls, with moisture-resistant board on all exterior foundation walls. We use the correct screw pattern, land all seams on framing, and cut around mechanical chases and bulkheads cleanly. When the boarding crew leaves an Calder basement, the taping crew can start without rework.

Legal suite partition boarding in Calder

Secondary suite additions in Calder homes require the right board on every surface: 5/8” Type X fire-rated on the ceiling between the suite and the main floor, STC soundproof board on party walls, moisture-resistant in bathrooms and laundry. We board to the Edmonton secondary suite spec so the installation passes inspection without a callback.

Calder drywall in context

About Calder

In the early part of the 20th century, Calder was part of the Hudson's Bay Company Reserve and settled primarily by employees of the Grand Trunk Pacific Railway.

What we see in Calder

In Calder the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Why Edmonton homeowners trust Emplastrum for drywall installation

We board the way a finishing specialist wants it boarded

Most boarding crews treat installation as a volume game — get the board up, move on. Every taping problem we have fixed over the years started with a boarding problem underneath it. We board every Edmonton job the way we would want it boarded before we tape it: ceiling first, correct screw pattern, seams on framing, board plumb. The finish is better because the boarding behind it is right.

Fixed price, same-day reply, all Edmonton quadrants

We cover all four Edmonton quadrants, Edmonton, Albany, Athlone, Baranow and Edmonton, 7 days a week — every established and newer Edmonton community from Albany, Athlone, Baranow to Albany, Athlone, Baranow. Free on-site quotes, fixed prices — you know the number before we start and it does not change.

Drywall board types used in Calder homes

Standard 1/2” drywall — the right choice for most Calder walls

Standard 1/2” drywall is correct for interior walls and ceilings in Calder homes away from moisture exposure. It is the most common board we install, finishes the same as the rest of the house and is what most Calder walls and ceilings should be. Most interior walls and ceilings in Calder homes use standard 1/2” board.

Moisture-resistant, fire-rated and soundproof — where spec matters in Calder

Exterior basement walls in Calder homes need moisture-resistant board. In Calder, every bathroom and laundry wall takes moisture-resistant board. A Calder suite ceiling must carry 5/8” Type X fire-rated board. In Calder, the suite-to-main party wall takes STC soundproof board. The right board per Calder surface is set at the quote for a clean inspection.

Our Calder drywall installation process, step by step

Ceiling board first, always

Every boarding job in Calder starts with the ceiling, because the wall board butts up under it and helps carry it. In Calder, reversing the order under-supports the joints.

Wall board and seams

Walls go up with correct screws and framed seams. In Calder, completed boarding hands straight to taping with nothing to fix.

Types of Drywall Installation work in Calder

New installs, renovation work and repair in Calder

We handle the full range of drywall installation work in Calder — from brand-new basement boarding and taping to single-room renovation patches and targeted repair work. Every job gets the same Level 4 standard and fixed price commitment.

Legal suites and multi-use spaces in Calder

Legal suite work in Calder requires specific board specs: fire-rated on the suite ceiling, soundproof on party walls, moisture-resistant in wet areas. We confirm the spec before we start and board to it.

Drywall installation work we do in Calder

New development boarding in Calder — basement and flex rooms

Calder homeowners finishing new development basements call us to do the boarding before the taping crew. We hang ceiling board first, wall board second, with moisture-resistant on exterior foundation walls and any wall adjacent to plumbing rough-in. We cut bulkheads cleanly, use the correct screw pattern throughout and leave the space ready for taping. No re-work — the taper can start the day after we finish.

Legal suite boarding to spec in Calder

With strong rental demand in the Calder area, secondary suite boarding calls are among the most consistent installation jobs we do. We board to the Edmonton spec — 5/8” Type X fire-rated on the suite ceiling, STC soundproof on party walls, moisture-resistant in wet areas — and leave an inspection-ready installation. Fixed price, specified at the on-site quote.

How it works

Simple, clean, on schedule — Drywall Installation in Calder

Free quote

We come out to your Calder property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Calder starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Calder. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Calder home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Calder. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Calder trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Calder.

Read our reviews on Google

FAQ — Drywall Installation Calder

Drywall Installation Calder: your questions answered

How long does drywall installation take in a Edmonton home?: A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Calder: the quoted timeline is the real one. The taping crew can usually start the next day.
Do you do drywall installation in Calder?: Yes — Calder is part of our regular service area, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.
How do you handle texture matching after drywall installation work in Calder?: Texture matching is part of every repair and patch job we do in Calder. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.
What board do you use on Calder exterior basement walls?: Moisture-resistant board on all Calder exterior foundation walls and around plumbing and laundry. Standard 1/2-inch board for interior walls away from moisture in your Calder home.
Do you board for legal suites in Calder?: Yes, and we know the spec. A legal secondary suite in Calder requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. We board Calder suites to that spec so the installation passes inspection.
How long does drywall installation take in an Calder home?: A standard basement in an Calder home typically takes one to two days to board. In Calder, a full new build or major renovation stretches the timeline. Honest scheduling in Calder: the quoted timeline is the real one. Taping typically starts next-day on Calder jobs.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Calder

Drywall installation in Calder &mdash; hung straight, screwed off right