How long does drywall installation take in a Edmonton home?

A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. At the Bisset quote you get the true install timeline. The taping crew can usually start the next day.

Does Bisset taping follow straight after boarding?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Bisset.

What board do you use for exterior basement walls in Bisset?

Every Bisset foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Bisset interior walls away from moisture take standard 1/2” board. Bisset suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Bisset surface is set at the on-site quote.

Do you do drywall installation in Bisset?

Yes — Bisset is part of our regular service area. We cover Bisset, Ambleton, Crawford Plains, Daly Grove, Ekota and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.

How long does drywall installation take in an Bisset home?

A standard basement in an Bisset home typically takes one to two days to board. An Bisset new build or sizeable reno takes correspondingly longer. At the Bisset quote you get the true install timeline. The finishers can usually begin the following day in Bisset.

What board do you use on exterior basement walls in Edmonton?

In Bisset, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Bisset interior walls get standard 1/2” board. Legal suites in Bisset take 5/8” Type X on the ceiling and soundproof party walls. Each Bisset surface gets its board product confirmed at the quote.

Drywall Installation Bisset | New Board

Drywall installation in Bisset — right board, right spec, ready to tape

The Bisset finish is only as good as the boarding under it. We board Bisset level with proper screws, framed seams and tidy cuts around corners and mechanical. Bisset is a higher-end Mill Woods and Meadows community where boarding quality is expected to be consistent with the quality of the rest of the home. We cover Bisset, Crawford Plains, Daly Grove, Ekota and the surrounding area, 7 days a week.

Basement development boarding in Bisset — ceiling first, then walls
Exterior and wet-area Bisset walls boarded moisture-resistant
Drywall boarding and hanging — new builds and renovations
Bisset screw spacing to spec, seams landed on framing
Renovation reboarding — removing old board, installing new to current spec
Bisset board hung on the correct screw pattern, seams on framing
Ready for taping when we leave an Bisset job — no rework

Drywall board types used in Bisset homes

Standard 1/2” drywall — the right choice for most Bisset walls

Standard 1/2” drywall is correct for interior walls and ceilings in Bisset homes away from moisture exposure. It is the most common board we install, finishes the same as the rest of the house and is what most Bisset walls and ceilings should be. Most interior walls and ceilings in Bisset homes use standard 1/2” board.

Moisture-resistant, fire-rated and soundproof — where spec matters in Bisset

Exterior basement walls in Bisset homes need moisture-resistant board. Bisset bathrooms and laundry need moisture-resistant board on all walls. Bisset legal-suite ceilings require 5/8” Type X fire-rated board. Bisset party walls between a suite and the main living space get STC soundproof board. We specify the right product for each Bisset surface at the on-site quote so there are no surprises at inspection.

Drywall installation work we do in Bisset

Full basement boarding in Bisset homes

The most common boarding call in Bisset is full basement installation. The builder framed the space; the homeowner is ready to finish it. We hang the ceiling board first — always — then the walls, with moisture-resistant board on all exterior foundation walls. We use the correct screw pattern, land all seams on framing, and cut around mechanical chases and bulkheads cleanly. When the boarding crew leaves an Bisset basement, the taping crew can start without rework.

Boarding to a premium standard in Bisset

Bisset homeowners expect the boarding to match the quality of the rest of the home. We hang board level and flush, use the correct screw pattern throughout, land all seams on framing and cut corners and archways cleanly. The taping crew gets a surface they can work to Level 4 or Level 5 without fighting the boarding behind it.

Why Bisset homeowners trust Emplastrum for drywall installation

Boarding done right means the finish can be done right in Bisset

The quality of a Level 4 wall finish starts with the boarding behind it. In Bisset, off-level board, floating seams or sparse screws hand the taping crew a fight. We board every Bisset job the way a taping specialist would want it boarded — because we are the taping specialist. When we finish the boarding, we can finish the taping to Level 4 without fighting the installation underneath.

Fixed price, same-day reply, all four Edmonton quadrants, Edmonton, Crawford Plains, Daly Grove, Ekota and Edmonton

We cover all four Edmonton quadrants, Edmonton, Crawford Plains, Daly Grove, Ekota and Edmonton, 7 days a week — Bisset, Crawford Plains, Daly Grove, Ekota and every community in between. The Bisset number is set before we start and stays set on site.

What affects the cost of drywall installation in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Bisset wet rooms — bath and laundry — get moisture board throughout. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. Standard 1/2” suits Bisset interior walls clear of moisture. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

Why Bisset homeowners trust Emplastrum for drywall installation

Boarding done right means the finish can be done right in Bisset

The quality of a Level 4 wall finish starts with the boarding behind it. Un-level Bisset board, mid-field seams or wide screw spacing all make trouble for the finishers. We board every Bisset job the way a taping specialist would want it boarded — because we are the taping specialist. When we finish the boarding, we can finish the taping to Level 4 without fighting the installation underneath.

Fixed price, same-day reply, all four Edmonton quadrants, Edmonton, Crawford Plains, Daly Grove, Ekota and Edmonton

We cover all four Edmonton quadrants, Edmonton, Crawford Plains, Daly Grove, Ekota and Edmonton, 7 days a week — Bisset, East Hills, Applewood, Edmonton, Crawford Plains, Daly Grove, Ekota and Penbrooke and every community in between. Your Bisset quote is free and the price fixed — it holds when we arrive.

Drywall board types for Bisset homes

Standard board for most walls

Standard 1/2-inch drywall is correct for most interior walls and ceilings in Bisset away from moisture exposure.

Moisture-resistant, fire-rated and soundproof where the spec matters

Exterior basement walls and wet areas need moisture-resistant board; legal suite ceilings need fire-rated board; party walls need soundproof board. We specify the right product for every Bisset surface before we pull the first sheet.

How it works

Simple, clean, on schedule — Drywall Installation in Bisset

Free quote

We come out to your Bisset property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Bisset starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Bisset. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Bisset home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Bisset. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Bisset trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Bisset.

Read our reviews on Google

FAQ — Drywall Installation Bisset

Drywall Installation Bisset: your questions answered

How long does drywall installation take in a Edmonton home?: A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. At the Bisset quote you get the true install timeline. The taping crew can usually start the next day.
Does Bisset taping follow straight after boarding?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Bisset.
What board do you use for exterior basement walls in Bisset?: Every Bisset foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Bisset interior walls away from moisture take standard 1/2” board. Bisset suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Bisset surface is set at the on-site quote.
Do you do drywall installation in Bisset?: Yes — Bisset is part of our regular service area. We cover Bisset, Ambleton, Crawford Plains, Daly Grove, Ekota and surrounding communities, 7 days a week. Free on-site quotes, fixed prices, same-day reply.
How long does drywall installation take in an Bisset home?: A standard basement in an Bisset home typically takes one to two days to board. An Bisset new build or sizeable reno takes correspondingly longer. At the Bisset quote you get the true install timeline. The finishers can usually begin the following day in Bisset.
What board do you use on exterior basement walls in Edmonton?: In Bisset, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Bisset interior walls get standard 1/2” board. Legal suites in Bisset take 5/8” Type X on the ceiling and soundproof party walls. Each Bisset surface gets its board product confirmed at the quote.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Bisset

Drywall installation in Bisset — right board, right spec, ready to tape