Can the taping crew start right after you board an Allendale home?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Allendale.

What board do you use for exterior basement walls in Allendale?

Moisture-resistant board covers the Allendale foundation walls and the plumbing and laundry zones. Standard 1/2” board on dry Allendale interior walls. The Allendale suite build: fire-rated 5/8” Type X ceiling, soundproofed party walls. We lock the Allendale board spec per surface at quote time.

Do you board for legal suites in Allendale?

Yes, and we know the spec. A legal secondary suite in Allendale requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. Boarding to spec is why Allendale suite installs clear inspection.

How long does drywall installation take in a Edmonton home?

A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. At the Allendale quote you get the true install timeline. The taping crew can usually start the next day.

Does Allendale taping follow straight after boarding?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Allendale.

What board do you use for exterior basement walls in Allendale?

Every Allendale foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Allendale interior walls away from moisture take standard 1/2” board. Allendale suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Allendale surface is set at the on-site quote.

Drywall Installation Allendale | New Board

Drywall installation hung straight and screwed off right

A good Allendale finish starts with good boarding. In Allendale the board goes up level, correctly screwed, seams on framing, clean cuts at mechanical and corners. Allendale is one of Scona’s newest communities — most homes have framed, unfinished basements ready for boarding. We cover Allendale, East Hills, Applewood and Edmonton and the surrounding area, 7 days a week.

Tape-ready Allendale boarding, nothing for the taping crew to fix
Drywall boarding and hanging in Allendale — new builds and renovations
Basement boarding — ceiling first, walls second
Drywall boarding in Allendale — new builds and renovations
Basement development boarding in Allendale — ceiling first, then walls
Exterior and wet-area Allendale walls boarded moisture-resistant
Drywall boarding and hanging — new builds and renovations

What affects the cost of drywall installation in Allendale?

Square footage, board type and ceiling complexity in Allendale

The cost of drywall installation in Allendale comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaulted areas, bulkheads and soffits take longer), plus whether it is new build or reno around Allendale fixtures and trades. We measure on site and give you a fixed price before we start.

Board spec for Allendale homes — right product on every surface

Not every surface in an Allendale home needs the same board. Exterior foundation walls need moisture-resistant. Moisture-resistant board on all Allendale bathroom and laundry walls. In Allendale, suite ceilings take 5/8” Type X fire-rated. An Allendale suite party wall gains from STC soundproof board. In Allendale, moisture-free interior walls use standard 1/2” board. Each Allendale surface gets its product at the quote, before any inspector flags it.

Allendale drywall in context

About Allendale

Once farmed by the Allen family, this area was annexed by the City of Strathcona in 1907 and became part of Edmonton in 1912 when Strathcona and Edmonton amalgamated.

What we see in Allendale

In Allendale the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Our Edmonton drywall installation process, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. No Allendale wall board goes up before the ceiling is complete.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Clean, square corners — inside and out — on Allendale jobs. We hold Allendale board to the window and door frames, no overrun. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

Drywall board types for Edmonton homes

Standard 1/2” drywall — the right choice for most Edmonton walls

Standard 1/2” drywall is correct for interior walls and ceilings in Edmonton homes away from moisture exposure. It is the most common board we install and finishes the same as the rest of the house. Most interior walls and ceilings in Edmonton homes use standard board.

Moisture-resistant, fire-rated and soundproof — where the spec matters

Exterior basement walls need moisture-resistant board even with a vapour barrier. Bathroom and laundry walls need moisture-resistant. Legal suite ceilings require 5/8” Type X fire-rated. The Allendale suite party wall is built with STC soundproof board. We specify the right product for each surface before we pull the first sheet.

Our drywall installation process in Allendale, step by step

Ceiling board first — always — in Allendale homes

Every boarding job in Allendale starts with the ceiling. The Allendale ceiling boards first so the wall board can butt under and support it. In Allendale, skipping the sequence leaves joints carrying their own weight — cracks follow. No Allendale wall board goes up before the ceiling is complete. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Allendale

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. Seams on framing, not between studs — the Allendale standard. Clean, square corners — inside and out — on Allendale jobs. We hold Allendale board to the window and door frames, no overrun. When the boarding is done in a Allendale home, every surface is at the right plane and the taping crew can go straight to work.

Why Allendale homeowners trust Emplastrum for drywall installation

Board it right for the finish

Behind every Allendale taping problem we have fixed was a boarding problem first. We board every Allendale job the way we would want it boarded before we tape it.

Fixed price, same-day reply

We install drywall across Allendale and Scona, 7 days a week. For Allendale homeowners: free quote, fixed number, backed workmanship. Any issue on an Allendale boarding job earns a return trip and a proper fix.

What affects the cost of drywall installation in Allendale?

Square footage, board type and ceiling complexity in Allendale

The cost of drywall installation in Allendale comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaults, bulkheads and soffits add time), and new development vs renovation around the existing Allendale trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec for Allendale homes — right product on every surface

Not every surface in an Allendale home needs the same board. Exterior foundation walls need moisture-resistant. In Allendale, every bathroom and laundry wall takes moisture-resistant board. An Allendale suite ceiling requires 5/8” Type X fire-rated board. In Allendale, suite-to-living party walls do better with STC soundproof board. For dry Allendale interior walls, standard 1/2” board is right. In Allendale, the correct board per surface is set at the quote, not after inspection.

How it works

Simple, clean, on schedule — Drywall Installation in Allendale

Free quote

We come out to your Allendale property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Allendale starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Allendale. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Allendale home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Allendale. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Allendale trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Allendale.

Read our reviews on Google

FAQ — Drywall Installation Allendale

Drywall Installation Allendale: your questions answered

Can the taping crew start right after you board an Allendale home?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Allendale.
What board do you use for exterior basement walls in Allendale?: Moisture-resistant board covers the Allendale foundation walls and the plumbing and laundry zones. Standard 1/2” board on dry Allendale interior walls. The Allendale suite build: fire-rated 5/8” Type X ceiling, soundproofed party walls. We lock the Allendale board spec per surface at quote time.
Do you board for legal suites in Allendale?: Yes, and we know the spec. A legal secondary suite in Allendale requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. Boarding to spec is why Allendale suite installs clear inspection.
How long does drywall installation take in a Edmonton home?: A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. At the Allendale quote you get the true install timeline. The taping crew can usually start the next day.
Does Allendale taping follow straight after boarding?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Allendale.
What board do you use for exterior basement walls in Allendale?: Every Allendale foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Allendale interior walls away from moisture take standard 1/2” board. Allendale suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Allendale surface is set at the on-site quote.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Allendale

Drywall installation hung straight and screwed off right