How long does drywall installation take in a Albany home?

A standard basement in a Albany home typically takes one to two days to board. New construction or a big reno in Albany runs a longer schedule. The Albany timeline you get at the quote is realistic, not optimistic. In Albany, finishing usually begins the day after boarding wraps.

Do you stand behind your installation work in Albany?

Yes. Before leaving Albany, we walk the boarding together and fix anything not right.

Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Albany. In Albany, the wall board tucks under the ceiling board to support it. Out of order, Albany ceiling joints carry their own weight and crack sooner. In Albany, walls wait until the ceiling is boarded.

What board do you use for exterior basement walls in Albany?

Moisture-resistant board on all Albany exterior foundation walls and around plumbing and laundry. Standard 1/2” board for Albany interior walls away from moisture. For Albany legal suites: 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify the right product for each Albany surface at the on-site quote.

Do you board for legal suites in Albany?

Yes, and we know the spec. A legal secondary suite in Albany requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. The Albany suite is boarded to that spec, and inspection follows.

Do you hang the ceiling board before the walls?

Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.

Drywall Installation Albany | New Board

Drywall installation in Albany — hung straight, screwed off right

A good Albany finish starts with good boarding. In Albany the board goes up level, correctly screwed, seams on framing, clean cuts at mechanical and corners. Albany is one of Northwest’s newest communities — most homes have framed, unfinished basements ready for boarding. We cover Albany, Athlone, Baranow, Baturyn and the surrounding area, 7 days a week.

Fire-rated plus soundproof board on Albany suite separations
STC soundproof board on party walls for legal suites
Albany legal-suite separations get fire-rated and soundproof board
Correct screw pattern throughout Albany — all seams on framing
Tape-ready Albany boarding, nothing for the taping crew to fix
Drywall boarding and hanging in Albany — new builds and renovations
Basement boarding — ceiling first, walls second

What affects the cost of drywall installation in Albany?

Square footage, board type and ceiling complexity in Albany

The cost of drywall installation in Albany comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaults, bulkheads, soffits add setup), and new-build or renovation amid the existing Albany trades. We measure on site and give you a fixed price before we start.

Board spec for Albany homes — right product on every surface

Not every surface in an Albany home needs the same board. Exterior foundation walls need moisture-resistant. Albany wet rooms — bath and laundry — get moisture board throughout. The Albany suite ceiling is 5/8” Type X fire-rated. STC soundproof board helps on Albany suite party walls. Standard 1/2” suits Albany interior walls clear of moisture. We choose the Albany board per surface up front, not post-inspection.

Our drywall installation process in Albany, step by step

Ceiling board first — always — in Albany homes

Every boarding job in Albany starts with the ceiling. The Albany ceiling boards first so the wall board can butt under and support it. In Albany, skipping the sequence leaves joints carrying their own weight — cracks follow. No Albany wall board goes up before the ceiling is complete. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Albany

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. Seams on framing, not between studs — the Albany standard. Clean, square corners — inside and out — on Albany jobs. We hold Albany board to the window and door frames, no overrun. When the boarding is done in an Albany home, every surface is at the right plane and the taping crew can go straight to work.

Drywall board types for Edmonton homes

Standard 1/2” drywall — the right choice for most Edmonton walls

Standard 1/2” drywall is correct for interior walls and ceilings in Edmonton homes away from moisture exposure. It is the most common board we install and finishes the same as the rest of the house. Most interior walls and ceilings in Edmonton homes use standard board.

Moisture-resistant, fire-rated and soundproof — where the spec matters

Exterior basement walls need moisture-resistant board even with a vapour barrier. Bathroom and laundry walls need moisture-resistant. Legal suite ceilings require 5/8” Type X fire-rated. STC soundproof board goes on Albany suite party walls. We specify the right product for each surface before we pull the first sheet.

What affects the cost of drywall installation in Albany?

Square footage, board type and ceiling complexity in Albany

The cost of drywall installation in Albany comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaults, bulkheads and soffits add time), and new development vs renovation around the existing Albany trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec for Albany homes — right product on every surface

Not every surface in a Albany home needs the same board. Exterior foundation walls need moisture-resistant. In Albany, every bathroom and laundry wall takes moisture-resistant board. A Albany suite ceiling requires 5/8” Type X fire-rated board. In Albany, suite-to-living party walls do better with STC soundproof board. For dry Albany interior walls, standard 1/2” board is right. In Albany, the correct board per surface is set at the quote, not after inspection.

Drywall installation work we do in Albany

Renovation boarding in 1950s, 1960s and 1970s Albany homes

The most common drywall installation call from Albany is renovation work on a home built in the 1950s, 1960s and 1970s. Walls come down for a kitchen open-up, a bathroom move or a structural change, and new board goes up on the exposed framing. Albany homes from this era often have original plaster or early drywall that does not match modern board thickness — we assess the framing, select the right board thickness and hang it so the surface is consistent with the adjacent walls.

Bathroom and wet-area boarding in Albany — moisture-resistant board

Bathroom renovations in Albany homes require moisture-resistant board behind tile, on all walls adjacent to showers and tubs, and around any plumbing chase. We hang moisture-resistant board properly — staggered joints, correct screw pattern, no seams in high-exposure corners — so the tile substrate is solid and the installation holds for the long term. Older Albany homes often have green board or even drywall behind original tile; when that comes down, we re-board to current standards.

About Drywall Installation in Albany

Drywall Installation in Albany — what to expect

We provide drywall installation services in Albany and surrounding communities, 7 days a week. Albany is one of Northwest’s oldest communities, with homes from the 1960s and 1970s. Renovation drywall, stipple and popcorn ceiling removal and crack repair are among the most common drywall calls from this established Northwest area.

Fixed price — assessed on site in Albany

We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin unless the scope changes and we agree on it first.

How it works

Simple, clean, on schedule — Drywall Installation in Albany

Free quote

We come out to your Albany property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Albany starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Albany. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Albany home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Albany. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Albany trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Albany.

Read our reviews on Google

FAQ — Drywall Installation Albany

Drywall Installation Albany: your questions answered

How long does drywall installation take in a Albany home?: A standard basement in a Albany home typically takes one to two days to board. New construction or a big reno in Albany runs a longer schedule. The Albany timeline you get at the quote is realistic, not optimistic. In Albany, finishing usually begins the day after boarding wraps.
Do you stand behind your installation work in Albany?: Yes. Before leaving Albany, we walk the boarding together and fix anything not right.
Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Albany. In Albany, the wall board tucks under the ceiling board to support it. Out of order, Albany ceiling joints carry their own weight and crack sooner. In Albany, walls wait until the ceiling is boarded.
What board do you use for exterior basement walls in Albany?: Moisture-resistant board on all Albany exterior foundation walls and around plumbing and laundry. Standard 1/2” board for Albany interior walls away from moisture. For Albany legal suites: 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify the right product for each Albany surface at the on-site quote.
Do you board for legal suites in Albany?: Yes, and we know the spec. A legal secondary suite in Albany requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. The Albany suite is boarded to that spec, and inspection follows.
Do you hang the ceiling board before the walls?: Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Drywall Installation Albany

Drywall installation in Albany — hung straight, screwed off right