Can you finish a basement that is partially started in Strathcona?

Yes, and we do it regularly. We assess what is already there — whether the board type is correct for each surface, whether the framing is square enough to board, whether anything needs to come down — and give you a straight price to finish the Strathcona basement properly. We never board over problems in an Strathcona basement.

Do you cover all of Edmonton for basement drywall?

Yes — we cover all four Edmonton quadrants, Edmonton, Allendale, Argyll, Belgravia, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.

How long does basement drywall take in a Strathcona home?

Expect two to four Strathcona boarding days plus two to three finishing days — drying time between mud coats is non-negotiable. The extra partitions and rated board of a Strathcona suite conversion stretch the timeline. Honest scheduling in Strathcona: the quoted timeline is the real one.

Do you stand behind your basement drywall in Strathcona?

Yes. We walk the finished Strathcona basement with you, and if something is not right we come back and make it right.

Will my Allendale, Argyll, Belgravia basement walls get moisture-resistant board?

Yes — on every exterior foundation wall, even with a vapour barrier, in your Allendale, Argyll, Belgravia basement.

Can you finish a basement that is partially started in Strathcona?

Yes, and we do it regularly. We assess what is already there — whether the board type is correct for each surface, whether the framing is square enough to board, whether anything needs to come down — and give you a straight price to finish the Strathcona basement properly. An Strathcona basement gets its issues corrected first — not hidden behind new board.

Basement Drywall Strathcona | Basement Dev

Basement drywall and finishing in Allendale, Argyll, Belgravia, done to spec

We finish basements in Strathcona homes — boarding the framing, specifying the right board type for each surface, taping and mudding every joint and corner to Level 4, and leaving the space paint-ready. Strathcona is one of Scona’s newest communities — most homes are less than ten years old with framed, unfinished basements that homeowners are now ready to develop. We cover Strathcona, Allendale, Argyll, Belgravia and the surrounding area, 7 days a week.

Level 4 or Level 5 finishing
Bulkheads, soffits, mechanical chases and ceiling work
Exterior Strathcona walls and plumbing zones boarded moisture-resistant
Bulkheads, soffits, mechanical chases and custom ceiling work
Strathcona coverage — we come to you
Legal suite and secondary suite conversions
The Strathcona suite boundary gets soundproof board

Legal suites and basement development in Allendale, Argyll, Belgravia

Straight development

Most basement calls in Allendale, Argyll, Belgravia are straightforward development — rec room, bedrooms, bathroom — boarded and finished to a clean Level 4.

Legal suite conversions

If your Allendale, Argyll, Belgravia basement is turning into a legal suite, the City of Edmonton spec calls for a fire-rated ceiling and soundproof party walls — we install both. See Legal Suite Drywall Edmonton.

Strathcona drywall in context

About Strathcona

Strathcona was named for Lord Strathcona, Hudson Bay Company Governor (1889-1914) and the man chosen to drive the "last spike" of the CPR transcontinental railway.

What we see in Strathcona

In Strathcona the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Why Strathcona homeowners trust Emplastrum for basement drywall

We spec the board before we touch the framing in Strathcona

Most drywall crews board every surface the same way and leave the homeowner to deal with inspection issues after. We map every Strathcona basement before we price it and specify the right board in writing — moisture-resistant where it belongs, fire-rated where code requires, soundproof where the suite spec calls for it. We build Strathcona basements to pass inspection on the first visit, not the second.

Fixed price, same-day reply, all four Edmonton quadrants, Edmonton, Allendale, Argyll, Belgravia and Edmonton

We cover all four Edmonton quadrants, Edmonton, Allendale, Argyll, Belgravia and Edmonton, 7 days a week — Strathcona, Allendale, Argyll, Belgravia and every community in between. The Strathcona number is set before work begins and stays set when we get on site.

Why Strathcona homeowners trust Emplastrum for basement drywall

Spec done right

Basement drywall has to meet code as much as look good, and in Strathcona we put the right board on every surface, whether it is a straight development or a legal suite.

Fixed price, on schedule

We do basement drywall across Strathcona and Scona, 7 days a week. Quotes in Strathcona are free and on-site, the price is fixed, and the job is guaranteed. Not right in Strathcona? We come back and correct it.

Our Strathcona basement drywall process, step by step

Board selection and surface mapping before we pull the first sheet

Basement drywall in Strathcona is not one-product-fits-all. Exterior foundation walls need moisture-resistant board. Walls beside a bathroom or laundry in an Strathcona basement call for moisture-resistant board. Legal suite ceilings need fire-rated. Party walls need soundproof. We walk the Strathcona basement and map every surface before speccing materials — so the order matches the job and inspection brings no surprises.

Boarding, taping and mudding to Level 4 throughout

With the right board on the right surfaces, every seam, corner and fastener head gets taped and mudded to Level 4 — three coats, proper drying, sanded flat. Strathcona basement ceilings usually carry bulkheads, beam wraps and posts that the boarding has to negotiate. All of it gets taped to the same Level 4 standard we hold on Strathcona walls. When we leave the Strathcona basement, it looks consistent from floor to ceiling.

Basement drywall work we do in Strathcona

Finishing the unfinished basement that came with the Strathcona home

The most common basement drywall call in Strathcona is the homeowner who has been in the house for a few years and is finally ready to finish the basement the builder left as framed-and-open. We measure the space, assess the framing, spec the right board for each surface and board, tape and finish the entire basement to Level 4. Strathcona homeowners who wanted a home office, guest bedroom or recreation room get a space that is paint-ready and ready for flooring.

Secondary suite partitions and bedroom additions in Strathcona basements

A number of Strathcona homeowners are converting their unfinished basements to secondary suites or adding a legal bedroom to an existing basement layout. We board the partitions, tape all joints and corners to Level 4, and make sure the board spec is correct for each wall — moisture-resistant where required, fire-rated on the suite ceiling, soundproof on party walls.

What affects the cost of basement drywall in Edmonton?

Linear footage, board type and ceiling complexity in Edmonton basements

The cost of basement drywall in Edmonton comes down to five things: total linear footage of framed wall, ceiling square footage and height, the number of bulkheads, soffits and chases, board type (standard, moisture-resistant or soundproof cost differently), and how much mechanical, plumbing and structural work the walls have to work around. A simple open basement in a 2010s Scona new build is different from a basement in a 1970s Allendale, Argyll, Belgravia bungalow with low ceilings and exposed beams. Your Strathcona basement gets measured in person and priced firm before the work begins.

Legal suite requirements and Edmonton basement drywall specs

A legal secondary suite in Edmonton has specific drywall requirements — 5/8” Type X fire-rated board on the ceiling between the suite and the floor above, and STC-rated soundproof board on suite walls. Moisture-resistant board is required in bathrooms, laundry and any wall with exterior exposure. We know the Edmonton spec and we board to it — you will not need to call us back to add board before an inspection.

How it works

Simple, clean, on schedule — Basement Drywall in Strathcona

Free quote

We come out to your Strathcona property, take a real look at the basement drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every basement drywall quote in Strathcona starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the basement drywall in Strathcona. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Strathcona home while we finish the basement drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished basement drywall with us and you're happy with the result in Strathcona. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the basement drywall contractor Strathcona trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your basement drywall project in Strathcona.

Read our reviews on Google

FAQ — Basement Drywall Strathcona

Basement Drywall Strathcona: your questions answered

Can you finish a basement that is partially started in Strathcona?: Yes, and we do it regularly. We assess what is already there — whether the board type is correct for each surface, whether the framing is square enough to board, whether anything needs to come down — and give you a straight price to finish the Strathcona basement properly. We never board over problems in an Strathcona basement.
Do you cover all of Edmonton for basement drywall?: Yes — we cover all four Edmonton quadrants, Edmonton, Allendale, Argyll, Belgravia, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.
How long does basement drywall take in a Strathcona home?: Expect two to four Strathcona boarding days plus two to three finishing days — drying time between mud coats is non-negotiable. The extra partitions and rated board of a Strathcona suite conversion stretch the timeline. Honest scheduling in Strathcona: the quoted timeline is the real one.
Do you stand behind your basement drywall in Strathcona?: Yes. We walk the finished Strathcona basement with you, and if something is not right we come back and make it right.
Will my Allendale, Argyll, Belgravia basement walls get moisture-resistant board?: Yes — on every exterior foundation wall, even with a vapour barrier, in your Allendale, Argyll, Belgravia basement.
Can you finish a basement that is partially started in Strathcona?: Yes, and we do it regularly. We assess what is already there — whether the board type is correct for each surface, whether the framing is square enough to board, whether anything needs to come down — and give you a straight price to finish the Strathcona basement properly. An Strathcona basement gets its issues corrected first — not hidden behind new board.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Basement Drywall Strathcona

Basement drywall and finishing in Allendale, Argyll, Belgravia, done to spec