Can you board a legal suite basement?

Yes — we board the Bisset, Crawford Plains, Daly Grove suite to the City of Edmonton spec — fire-rated ceiling, soundproof party walls — with the rest of the basement.

Does the Hillview basement spec include moisture-resistant board?

Yes — on every exterior foundation wall, even with a vapour barrier, in your Hillview basement.

What board do you use on exterior basement walls in Hillview?

Green board or purple board covers the Hillview exterior-foundation walls and the plumbing and laundry areas. Interior Hillview partition walls away from moisture take standard 1/2” drywall. Legal suites in Hillview run 5/8” Type X fire-rated ceilings with soundproof board on the party walls. The correct product for every Hillview surface is locked in at the on-site quote.

What board do you use on exterior basement walls in Hillview?

Moisture-resistant board — green or purple — goes on all Hillview walls against the exterior foundation and around plumbing and laundry. For Hillview interior partitions clear of moisture, standard 1/2” drywall is the right product. An Hillview suite conversion specs fire-rated 5/8” Type X above and soundproof board between. We specify the right product for each Hillview surface at the on-site quote before we start.

Can you board a basement that was partially started?

All the time. We assess what is already there — whether the board choice is correct for each surface, whether the framing is square enough to board, whether any board needs to come down — and give you a straight price to finish it properly. Boarding over issues is not how we work in Hillview.

Do you use moisture-resistant board on Hillview basement walls?

Yes — on every exterior foundation wall, even with a vapour barrier, in your Hillview basement.

Basement Drywall Hillview | Basement Dev

Basement drywall in Hillview boarded, taped and finished right

Get the drywall right and the Hillview basement follows: correct board on exterior walls, sound assemblies if a suite is planned, flat paint-ready finishing. In Hillview we board, tape, mud and finish basement development to Level 4 or 5. Hillview is an older Mill Woods and Meadows community where settling cracks, aging texture and the occasional plaster repair come up, so basement work here is steady. We cover Hillview, Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows, 7 days a week.

Bulkheads, soffits, mechanical chases and ceiling work
Exterior Hillview walls and plumbing zones boarded moisture-resistant
Bulkheads, soffits, mechanical chases and custom ceiling work
Hillview coverage — we come to you
Legal suite and secondary suite conversions
The Hillview suite boundary gets soundproof board
Legal suite and secondary suite conversions across Edmonton

What affects the cost of basement drywall in Hillview?

Linear footage, board type and basement layout in Hillview homes

The cost of basement drywall in Hillview comes down to five things: total linear footage of framed wall, ceiling square footage and height, the number of bulkheads, soffits and mechanical chases, board type (standard, moisture-resistant, soundproof and fire-rated are different costs), and how much mechanical, plumbing and structural work the walls need to accommodate. Your Hillview basement gets measured in person and priced firm before the work begins.

Legal suite requirements and basement drywall spec in Hillview

If the basement includes a legal secondary suite, the board spec changes significantly. 5/8” Type X fire-rated board is mandatory on the Hillview suite-to-upper-floor ceiling. STC-rated soundproof board belongs on every Hillview suite-to-main party wall. Exterior walls and damp-prone areas in your Hillview basement are boarded moisture-resistant. We settle this at the Hillview spec stage — not when inspection catches it.

Why Hillview homeowners trust Emplastrum for basement drywall

Spec done right

Basement drywall has to meet code as much as look good, and in Hillview we put the right board on every surface, whether it is a straight development or a legal suite.

Fixed price, on schedule

We do basement drywall across Hillview and Mill Woods and Meadows, 7 days a week. Free at-home Hillview quoting, fixed pricing, and work we stand behind. When an Hillview job is not right, we make it right — on us.

Basement drywall board types used in Hillview homes

Standard drywall — interior basement walls in Hillview

Standard 1/2” drywall is correct for interior partition walls inside an Hillview basement that have no moisture exposure — the walls separating a home office from a bedroom, partition walls in a recreation room or home theatre. It handles lighter on site and finishes identically to the rest of your Hillview home. Most interior basement partition walls in Hillview homes use standard board.

Moisture-resistant, soundproof and fire-rated — where the spec matters in Hillview

Exterior foundation walls in Hillview homes need moisture-resistant board even with a vapour barrier. Hillview basement bathrooms and laundry rooms take moisture-resistant board wall-to-wall. In Hillview, suite ceilings take 5/8” Type X fire-rated board — no substitutes. Install STC soundproof board on the Hillview party wall and the quiet is immediately noticeable. Surface mapping and product specification happen at the Hillview quote — before anything starts.

Why Hillview homeowners trust Emplastrum for basement drywall

We spec the board before we touch the framing in Hillview

Most drywall crews board every surface the same way and leave the homeowner to deal with inspection issues after. We map every Hillview basement before we price it and specify the right board in writing — moisture-resistant where it belongs, fire-rated where code requires, soundproof where the suite spec calls for it. No call-backs before your Hillview permit inspection — the spec is right the first time.

Fixed price, same-day reply, all four Edmonton quadrants, Edmonton, Bisset, Crawford Plains, Daly Grove and Edmonton

We cover all four Edmonton quadrants, Edmonton, Bisset, Crawford Plains, Daly Grove and Edmonton, 7 days a week — Hillview, Bisset, Crawford Plains, Daly Grove and every community in between. Free on-site Hillview quotes, fixed prices — the number you get before we start does not change on site.

Our Edmonton basement drywall process, step by step

Board selection before we start — right product for every surface

Basement drywall in Edmonton is not one-product-fits-all. Exterior foundation walls need moisture-resistant board. Any wall touching a bathroom or laundry needs moisture-resistant. If there is a legal suite below or above, the ceiling and party walls need fire-rated. STC-rated soundproof board between the suite and the main living area reduces noise transmission significantly. We specify the right product for each surface before we pull the first sheet — not after the inspector flags it.

Boarding, taping and mudding in Edmonton basements

Once the right board is on the right surfaces, every seam, inside corner, outside corner and fastener head gets taped and mudded to Level 4 — three coats, proper drying time between each, sanded flat. Basement ceilings in Edmonton homes often have bulkheads for HVAC, beams and posts that need framing around them. We tape all of that to the same standard as the walls. When we leave, the basement looks the same quality from floor to ceiling.

Basement drywall board types used in Hillview homes

Standard drywall — interior basement walls in Hillview

Standard 1/2” drywall is correct for interior partition walls inside a Hillview basement that have no moisture exposure — the walls separating a home office from a bedroom, partition walls in a recreation room or home theatre. In Hillview basements it saves handling effort while finishing exactly like the main floors. Most interior basement partition walls in Hillview homes use standard board.

Moisture-resistant, soundproof and fire-rated — where the spec matters in Hillview

Exterior foundation walls in Hillview homes need moisture-resistant board even with a vapour barrier. For bathrooms and laundry in Hillview, moisture-resistant board goes on every wall. Code puts 5/8” Type X fire-rated board on every Hillview suite ceiling. The Hillview suite-to-main party wall is where STC soundproof board earns its cost — you can hear the difference. The Hillview quote includes a surface-by-surface map with the correct product specified up front.

How it works

Simple, clean, on schedule — Basement Drywall in Hillview

Free quote

We come out to your Hillview property, take a real look at the basement drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every basement drywall quote in Hillview starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the basement drywall in Hillview. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Hillview home while we finish the basement drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished basement drywall with us and you're happy with the result in Hillview. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the basement drywall contractor Hillview trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your basement drywall project in Hillview.

Read our reviews on Google

FAQ — Basement Drywall Hillview

Basement Drywall Hillview: your questions answered

Can you board a legal suite basement?: Yes — we board the Bisset, Crawford Plains, Daly Grove suite to the City of Edmonton spec — fire-rated ceiling, soundproof party walls — with the rest of the basement.
Does the Hillview basement spec include moisture-resistant board?: Yes — on every exterior foundation wall, even with a vapour barrier, in your Hillview basement.
What board do you use on exterior basement walls in Hillview?: Green board or purple board covers the Hillview exterior-foundation walls and the plumbing and laundry areas. Interior Hillview partition walls away from moisture take standard 1/2” drywall. Legal suites in Hillview run 5/8” Type X fire-rated ceilings with soundproof board on the party walls. The correct product for every Hillview surface is locked in at the on-site quote.
What board do you use on exterior basement walls in Hillview?: Moisture-resistant board — green or purple — goes on all Hillview walls against the exterior foundation and around plumbing and laundry. For Hillview interior partitions clear of moisture, standard 1/2” drywall is the right product. An Hillview suite conversion specs fire-rated 5/8” Type X above and soundproof board between. We specify the right product for each Hillview surface at the on-site quote before we start.
Can you board a basement that was partially started?: All the time. We assess what is already there — whether the board choice is correct for each surface, whether the framing is square enough to board, whether any board needs to come down — and give you a straight price to finish it properly. Boarding over issues is not how we work in Hillview.
Do you use moisture-resistant board on Hillview basement walls?: Yes — on every exterior foundation wall, even with a vapour barrier, in your Hillview basement.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paint

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat). Confirm quantities before buying.

Rather we handle it? Get a free estimate →

Basement Drywall Hillview

Basement drywall in Hillview boarded, taped and finished right